Professional Documents
Culture Documents
HORIVA
HORIVA
l This product is specified for use with solvent S-316. Do not use any other solvent than
measured.
l Samples containing impurities and samples with high viscosity should be filtered, diluted,
l Take care to avoid spilling samples or solvents on the main unit. It may cause product
failure.
l Avoid operating and storing the product under the following locations and conditions:
- Dusty locations
- Poor ventilation
l When handling liquids during measurement, calibration, or other actions, remove the
USB memory stick from the USB memory port and cap the port. If liquid spills on an USB
memory stick or the USB memory port, the liquid may enter the interior of the product
from the USB memory port and causes product damage.
l Do not overturn the main unit. It may cause liquid to leak from the unit inside.
l Do not press the keys or the screen with a sharp or hard object.
l Before performing maintenance or inspection, read and understand the chapter "
l Wipe with water when cleaning the exterior of the product, never use the organic solvent.
l Make sure that the power supply voltage is correct for the product before switching the
power ON.
l When the product will not be used for an extended period of time, remove the plug from
l Do not use the provided power cable for other than this product.
l If an abnormality occurs, disconnect the power supply cable from the inlet. Also install
the product with the power supply cable easily plugged off.