You are on page 1of 2

Deco Star

Model by José Meeusen 2-24-1994 Diagram by Jorge Jaramillo © 2018

45°

45°

1. Take the bottom edge to the 2. Take the bottom corner to 3. Take the bottom edge to the
top one and make pinches on the top one and make creases diagonal and make a valley fold
the vertical edges. Unfold. of about 1/4 th of the diagonal that goes a bit beyond the
Rotate 90° and repeat. Rotate on both sides. Unfold. Turn 90° middle of the side. Unfold.
45°. and repeat. Turn the paper 45°. Repeat with the other 3 edges.
Turn the paper over.

4. Take the bottom right 5. Make a valley crease from 6. Take the crease to the side
corner to the center of the top the bottom corner of the center of the square and make a
edge and make a valley square to the crease from step valley crease that extends to
crease. Unfold. Repeat with 3, by taking the bottom right the crease from step 3. Unfold
the other 3 corners. Turn the corner to the top right diagonal. and repeat with the other 3
paper over. Unfold. Repeat with the other 3 creases.
corners. Turn the paper over.

7. Reverse the creases from 8. Make a mountain crease where 9. Make a mountain crease
the previous step. indicated. Unfold. Repeat with where indicated. Unfold.
the other 3 corners. Turn the Repeat with the other 3
paper over. corners. Turn the paper over.
© Copyright 2018 by Jorge Jaramillo.
e

b
h a
d f
c

g
A

10. Locate point A and make a 11. Prepare the collapsing. a, b, 12. Fold only where indicated.
valley crease that starts there c and d must be concave and e,
and extends as shown by taking f, g and h must be convex.
the bottom right corner to the Gently push on the middle of
side of the inner square. Unfold. each side.
Repeat with the other 3 corners.

b
a

13. Make a mountain fold. Do 14a. Make the mountain folds. 14b. Fold the tip to the left
not crease on the lower right using the crease from step 10.
hand side. The other creases
indicated in step 11 should still
be there but not be flattened.

[14a - 14b]

15. Release the paper at the lower 16.Tuck the last corner under the 17. Result of step 16. Turn
right corner. Repeat steps 14a and layers of the first point. the paper over.
14b counterclockwise. Turn the
paper over.

18. Finished model. © Copyright 2018 by Jorge Jaramillo.

You might also like