Professional Documents
Culture Documents
MP Series Heat Sink Mountable Resistors in the Stock Mfr.Õs Case Power Max. Ohms/ Tol.
EACH
TO-126 and TO-220 Style Power Packages No. Type Type Rating Voltage Range 1-9 10-24 25-49
524-6XXX MP915 A 15 Watts* 200 0.02 5% 5.19 4.67 4.25
0.05 1% 4.67 4.25 3.89
0.1-5 1% 3.26 2.97 2.72
10-1K 1% 2.77 2.52 2.31
524-4XXX MP916 B 16 Watts* Pwr Ltd 0.01 5% 6.99 5.90 5.56
524-7XXX MP925 B 25 Watts* 500 5K-100K 1% 3.55 3.23 2.96
524-7XXX MP930 B 30 Watts* 250 0.02 5% 5.19 4.67 4.25
0.05 1% 5.96 5.42 4.96
0.1-5 1% 4.16 3.78 3.47
10-2K 1% 3.55 3.22 2.96
524-4XXX MP850 B 50 Watts* 300 0.2-5 1% 7.00 6.36 5.83
10-10K 1% 6.24 5.67 5.20
Ohms XXX Ohms XXX Ohms XXX Ohms XXX Ohms XXX
0.01 055 0.5 015 20 098 200 243 10K 523
0.02 002 1 020 25 115 500 306 20K 575
0.05 005 2 028 50 158 1K 356 50K 655
0.1 010 5 050 75 185 2K 400 100K 717
0.2 012 10 060 100 202 5K 466 Ñ Ñ
Ohms XXX Ohms XXX Ohms XXX Ohms XXX Ohms XXX
0.02 002 0.5 010 10 022 75 032 1K 040
0.05 004 1 014 20 024 100 034 2K 042
0.1 006 2 016 25 026 200 036 5K 467
0.2 008 5 031 50 030 500 038 10K 524
Standard Tolerance: 1%. Temperature Coefficient: TC taken at 25¡C and 150¡C. MP820: Mounting Note: The MP820 and MP821 must be mounted using a screw and compression
All resistance values, Ð20 to +50 ppm/¡C. MP821: 5 ohms and above, Ð20 to +50 ppm/¡C; washer mounting technique. This will provide sufficient pressure on the package over time
below 5 ohms down to 0.5 ohm, Ð20 to +80 ppm/¡C; below 0.5 ohm down to 0.05 ohm, and through large temperature variations to maintain the maximum power dissipation
0 to +200 ppm/¡C, below 0.05 ohm down to 0.02 ohm, 0 to +300 ppm/¡C. Dielectric capability. Maximum torque to be applied to mounting screw is 8 in-lbs (0.90 N-m). See
Strength: 1500 Vrms AC. Measurement Note: For these specifications, resistance Power Rating Note for instructions on determining maximum power dissipation on your
measurement shall be made at a point 0.2 inch (5.08 mm) from the resistor body. heat sink.