Professional Documents
Culture Documents
L - Scooptram ST2D
L - Scooptram ST2D
1
Hardened loader
For small and
narrow vein mines
A parallel boom design matched to an Three point mounting and anti-skid protection Long life roller bearing center articulation
aggressive bucket configuration provides provides safe access for operators and joint provides durable in use.
efficient mucking operations. service personnel.
The Scooptram ST2D is a reliable loader with simple and strong structure for smaller sized
operations that range from narrow vein mines to construction sites. The Scooptram ST2D has
benefits from focused on safety, durability and comfort. The worldwide application in a long
run of the Scooptram ST2D has been proved great reputation bucket by bucket. Main benefits
Conventional and proven High safety level thanks to features
ISO ROPS/FOPS approved components are well such as ISO ROPS/FOPS approved
operator’s canopy protected within the frame operator’s canopy, boom up lock
device, wheel chocks, audio-visual
reverse alarm, emergency stop
buttons, 3-point contact and anti-skid
Side seated operator position for protection to safe access of operators
efficient bi-directional operation
with wide and clear visibility
& service personnel.
Three point mounting and
anti-skip protection for safe
access for operator and service Durability thanks to strong frame
personnel Audio-visual reverse alarm structure and long life roller bearing
provides safety in the work
Boom up lock device environment
center articulation joint with a
parallel boom design matching to
an aggressive bucket configuration
which provides for quick and efficient
mucking.
2 3
Technical Specifications = Standard = Option
The Scooptram ST2D is designed with strong and longlife structure to provide shorter Tamming capacity* 3 600 kg System pressure: 11.4 MPa
Breakout force, hydraulic 9 060 kg Hydraulic tank capacity 144 litres
machine downtime. We actively look for your feedback and take actions on improvement. Breakout force, mechanical 6 550 kg Filtration, suction line: 50 μm
*Tramming capacity with EOD bucket 3 200 kg. Manual hydraulic tank fill pump
Motion times Steer cylinder: chrome plated stem, 1 × 125 mm diameter
Boom raising 3.7 sec Hoist cylinder: chrome plated stem, 1 × 180 mm diameter
Boom lowering 3.7 sec Dump cylinder: chrome plated stem, 1 × 180 mm diameter
Dumping 4.0 sec
+ Safety Weights (Standard empty vehicle)
The Scooptram ST2D is designed to keep a high level of safety. A new designed Approximate weight 12 840 kg
Control system
Engine data display
ISO ROPS/FOPS approved canopy provides safe operation. It can also be Axle load, front end 5 800 kg
Audio-visual reverse alarm
installed with Ausal fire suppression system. Axle load, rear end 7 040 kg
Monostick steering control
Daul lever dump and hoist control
Engine Low hydraulic oil level warning
Deutz TCD3.6L4, EPA Tier 3/EU Stage IIIA/ Blockout 3rd and 4th gears
Brand/model: Deutz
CHINA III
Blockout 4th Gear
Power rating at 2 300 rpm 74.4 kW / 100 hp
Side seated operator position for efficient bi-directional operation ensures wide EOD bucket
visibility. Ergonomic operator seat with seat belt provides comfort during a full Axles
Wheel chocks and chocks brackets
Knockdown construction
work shift.
Brand/model: Dana, 14D Certral manual lubrication
Degree of rear axle oscillation: 16° (8° on each side) Automatic lubrication system with timer
Differentials: Front, No spin Anti-corrosion cooler
Differentials: Rear, Standard Handheld fire extinguisher
Ansul manually activated fire suppression system with engine shut down
Ansul checkfire automatically activated fire suppression system
Brakes
Dump cylinder rod protector
Hydraulically applied spring released; fully enclosed wet discs at each
Norilsk compliant BOM - ST2DR (Duetz engine F6L912W)
wheel end
4 5
Technical specifications Technical specifications
1st gear 3.4 3.3 3.3 3.2 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.8
2nd gear 6.8 6.6 6.4 6.2 6.0 5.8 5.5 5.3 5.1 5.0 4.6 3.6
km/h
3rd gear 11.3 10.6 10.3 9.8 9.2 8.2 6.9 5.7 5.3
4th gear 16.2 15.1 13.1 11.3
3% rolling resistance assumed. Actual performance may vary depending on the application.
Grade performance
3 724(H1)
3 600±100
Standard configuration, loaded bucket
°
% Grade 0.0 2.0 4.0 6.0 8.3 10.0 12.5 14.3 16.0 18.0 20.0 25.0
40
2 328
2 112±70
Ratio Grade 1:12 1:10 1:8 1:7 1:5 1:4
1 520(T2)
1 484(H2)
1 652
1st gear 3.3 3.2 3.1 3.0 2.9 2.9 2.8 2.8 2.7 2.6 2.5 2.5
2nd gear 6.7 6.4 6.2 5.9 5.6 5.4 4.9 4.5 4.2 3.8 3.4
km/h
3rd gear 11.0 10.2 9.7 8.6 7.0 6.0
612
240 445
16°
210
4th gear 15.0 13.3 10.1
3% rolling resistance assumed. Actual performance may vary depending on the application.
2 170 1 270 1 270 917(L1)
1 321
1 554
2 293(T1)
2 598
Measurements 2 700
7 003±70
Turning radius
1 663(W)
1 740±70
1 716
2
38°±
2 240
3 020
2 912
Bucket Data
STANDARD EOD
STD
827
R2
Volume, nominal heaped (m³) 1.3 1.5 1.7 1.9 2.1 1.1 1.5 1.8 1.9
R4
R5 200
87
0
Maximum material density (t/m³) 2.8 2.4 2.1 2.0 1.7 3.3 2.4 2.1 2.0
Width, bucket (mm) W 1 663 1 663 1 663 1 663 1 663 1 666 1 549 1 662 1 662
Tramming position: Axle centerline to bucket lip (mm) T1 2 106 2 229 2 254 2 293 2 414 2 301 2 279 2 370 2 420
Tramming position: Ground to bucket lip (mm) T2 1 274 1 315 1 368 1 520 1 372 1 532 1 531 1 534 1 534
2 912 Reach dimension (mm) L1 726 751 802 917 900 1 041 1 070 1 088 1 151
Raised position: Back height, max. (mm) H1 3 470 3 586 3 669 3 724 3 816 3 635 3 743 3 775 3 902
3 020
2 240 2 000X45° Raised position: Bucket tip, height (mm) H2 1 615 1 546 1 518 1 484 1 386 1 465 1 518 1 446 1 461
6 7
epiroc.com
commitment drives us to keep moving forward.
Performance unites us, innovation inspires us, and