Professional Documents
Culture Documents
Vlans HP 2524
Vlans HP 2524
Vlans HP 2524
Set up a telnet session to the switch or log onto the console port.
At the HP ProCurve Switch 2524# prompt enter menu and press return to bring
up the following main menu.
Main Menu
1. System Information
2. Port/Trunk Settings
3. Network Monitoring Port
4. Spanning Tree Operation
5. IP Configuration
6. SNMP Community Names
7. IP Authorized Managers
8. VLAN Menu...
0. Return to Main Menu...
Select 8. VLAN Menu...
1. VLAN Support
2. VLAN Names
3. VLAN Port Assignment
4. Return to Previous Menu...
0. Return to Main Menu...
From the actions menu select Add and press return or use the A key to select Add.
Enter the new VLAN ID as 2 (or other value as required) and type in a relevant name.
802.1Q VLAN ID : 2
Name : voice_vlan
Phone ports should show Tagged On the Voice VLAN and Untagged on the Default
VLAN
The 3300 ICP port should show Untagged in the voice_VLAN and No on the Default
VLAN.
The router port should show Tagged On the Voice VLAN and Untagged on the Default
VLAN
Any other data only ports should show Untagged on the Default VLAN No on the Voice
VLAN.