Professional Documents
Culture Documents
The Spiral Target or ST nozzle was The orifice cap is available in 13 In every application the target portion
originally designed by Marley to diameters ranging from .362" through of the nozzle is located an optimum
replace ceramic metering orifices 1.099". This amount of flexibility allows distance above the top of the cooling
located in the hot water distribution for a wide range of adjustment in water tower fill to obtain maximum water
basins of crossflow towers and to flow rates and basin water levels. distribution over the fill area.
eliminate water diffusion decks below
the hot water basins. The Spiral Target nozzle is available The Spiral Target nozzle is standard
in three lengths. The 2.625" nozzle is equipment on every Marley crossflow
The bottom portion of the Spiral Target used on wood, steel, and fiberglass cooling tower and easily installs
nozzle—commonly referred to as the cooling towers where basin support on other crossflow cooling towers
daisy—consists of six leaves designed structure does not obstruct the release regardless of the tower’s age or
to create an efficient breakup of water of water. The 4.875" nozzle is used on manufacture.
which allows even distribution over the larger industrial wood and concrete
fill area. cooling towers and on applications
where clogging might be a concern.
The Spiral Target nozzle is an injection The 6.875" nozzle is used on towers
molded polypropylene unit consisting where the release of the water has
of two parts. The main body with to clear obstructions within the tower
integral target diffuser and a snap-on structure.
insert or orifice cap.
Spiral Target nozzle
Suggested Specification
Nozzles will be used for water distribution on crossflow
cooling tower(s).