Professional Documents
Culture Documents
Citizen MDS-B-PJEX Automatic PLG Adjustment Procedure
Citizen MDS-B-PJEX Automatic PLG Adjustment Procedure
Series: Spindle
Model: M635LC
Citizen MDS-B-PJEX, Automatic PLG Adjustment Procedure
Overview
This procedure will show how to perform automatic PLG adjustment for Citizen Machines with MDS-B-SPJ2X and MDS-B-
PJEX spindle system for Simple C Axis function after PJEX or PLG replacement
Tools Needed
• None
Instructions
I. When to perform the Automatic Adjustment
A. When the SPJX unit is replaced or swapped
B. When the spindle PLG is adjusted or parts are replaced and the drive has an MDS-B-
PJEX unit attached to the spindle drive
C. When C axis accuracy issues arise and the machine has an MDS-PJEX unit attached to
the spindle drive
*If the main spindle is being adjusted, the slave to the guide bushing needs to be removed. See
Appendix for running the main spindle and guide bushing separately
II. PLG Automatic Adjustment
A. Enable Parameter writing
1. Press [MAINT] key on operator panel
2. Press [I/F Diag] soft key
3. Enter “1001” for Device
4. Enter “M” for Mode
5. Press [INPUT] key
• Specifications subject to change without notice. • An ISO9001 Certified Company us.mitsubishielectric.com/fa/en Serving the Americas ISO-NUMBER-XXXX
©2014, Mitsubishi Electric Automation, Inc. • All rights reserved. • 500 Corporate Woods Parkway • Vernon Hills, IL 60061 • Phone 847.478.2500 • Fax 847.478.2650
CNC Procedure
Series: Spindle
Model: M635LC
Citizen MDS-B-PJEX, Automatic PLG Adjustment Procedure
Appendix
I. Un-synchronizing the Main Spindle and Guide Bushing
A. Entering Maintenance Mode 1. From the Position/Monitor Page,
1. Press the [Maintenance] hard key
2. Press the {I/F Diag} soft key
3. Press "1001" under Device
4. Cursor over to Mode and press "M"
5. Press [INPUT] hard key
• Specifications subject to change without notice. • An ISO9001 Certified Company us.mitsubishielectric.com/fa/en Serving the Americas ISO-NUMBER-XXXX
©2014, Mitsubishi Electric Automation, Inc. • All rights reserved. • 500 Corporate Woods Parkway • Vernon Hills, IL 60061 • Phone 847.478.2500 • Fax 847.478.2650