Professional Documents
Culture Documents
Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting TVs User Name User Name Remember Me?
and Video Sources
Factory Resets Listing Password Log in
Page 1 of 7 1 2 3 4 5 6 7 >
12-13-2012, 08:45 AM #1
For all listed procedures, start with TV on, in TV mode, unless otherwise instructed.
After procedure is complete, unplug set and re-plug in to finish reset.
If more than one procedure is listed for a given manufacturer, try the different ones until you
see which one works for your set.
Coby:****************************************-
mode/source 2580 select “other setting”,select “shipment” then yes, after it exits service
menu you need to power set off.
Dynex ****************************************-
source/input 2580
hold vol down on tv and hold #1 button on remote, vol will jump to halfway and set shuts off.
Turn back on have 1st time setup screen.
source/input 2580
Element ****************************************
menu 0000
menu 1147
Haier ******************************************
Hisense *****************************************
https://www.badcaps.net/forum/showthread.php?t=24809 1/9
16.02.2021 Factory Resets L st ng - Badcaps Forums
In customer menu go to”Parental” enter 0000 then select”Clean All” then power the set off
and back on and first time setup menu will be there.
For some models, same as above model except in menu it is labeled “Lock”
Insignia *****************************************-
Mitsubishi ****************************************
Panasonic
Philips ******************************************
Polariod *****************************************-
Hold vol- and chan- or hold vol+ and chan+ (tv is on)
Proscan ******************************************
In customer menu go to setup,select parental control menu, enter 0000 then select “clear
channel list”.
RCA *******************************************-
Menu 1147
Sanyo *******************************************
hold vol down on TV, press and hold #1 button on remote, vol will jump to halfway and set
shuts off. Turn back on have 1st time setup screen.
Samsung *****************************************-
Seiki ********************************************-
Menu 0000
Sharp ********************************************
(Note – On Sharp models, you will need to look through the menus to find the reset option)
menu 1999
menu, 3481
https://www.badcaps.net/forum/showthread.php?t=24809 2/9
16.02.2021 Factory Resets L st ng - Badcaps Forums
menu 1147
while holding vol– & input buttons on tv plug in set when “k” appears push vol– & chan-
Sony *********************************************
Hold “arrow up” on remote and push power button on tv (tv is on)
Symphony *****************************************-
Source/input 2580
Toshiba ******************************************-
on Menu, select “Installation”, then “System Information” press the right arrow button,
(“System Information” will change to “Factory Reset” or something similar) follow on-screen
instructions
Vizio ********************************************
12-13-2012, 08:58 AM #2
12-13-2012, 09:00 AM #3
Vestel (most):
Menu 4725 then select "RESET"
NEC:
While powering on hold "MENU" or "INPUT" on TV, depending on model. (Only disables error
lock out/buffer and puts TV in temporary service mode.)
To reset to factory, on remote, Off Timer - Menu - Exit - Off Timer, then select reset option.
https://www.badcaps.net/forum/showthread.php?t=24809 3/9
16.02.2021 Factory Resets L st ng - Badcaps Forums
2 Pioneer KURO 9G, 12 Panasonic LCD/Plasma, 1 Sony LCD, 1 NEC Plasma, 2 Yamaha HTS, 5 Sharp LCDs, 5 Toshiba LCDs, 7
Philips Plasma/LCD, 1 Hitachi Plasma, 11 LG LCD/Plasma, 18 Samsung LED/LCD/Plasma, 1 Thomson Plasma, 1 Atec LCD, 1
Hanspree LCD, 1 Xerox LCD, 1 Harwa LCD, 2 Proview LCD, 2 Hyundai LCD, 1 "Onn" LCD, 1 Grundig LCD, 1 Dell LCD, 1 iiyama
LCD, 1 Acer LED, 1 Logik LCD, 1 Baird (China) LCD, 6 Bush LCDs, 22 Vestel LCDs (Best->Worst)
12-13-2012, 10:17 AM #4
12-28-2012, 10:37 PM #5
12-28-2012, 10:39 PM #6
https://www.badcaps.net/forum/showthread.php?t=24809 4/9
16.02.2021 Factory Resets L st ng - Badcaps Forums
VU42 / VW32 / VW37 / VW42 / VX20 / VX32 / VX37 HDTV10A /VX42
Push "Menu" on remote and then push "Vol-" and "Input" on keypad
Press and release "Menu" on keypad. Hold "Ch-" and "Ch+" buttons on keypad, then hold
"Menu" on remote.
P42
Hold "Ch+" and "Ch-" along with "Power" on keypad. OSD will show "F" on right bottom
portion of OSD.
VM60P
Press "Info" on remote, then press "Right Arrow," "Down Arrow," "Left Arrow," "Up Arrow,"
"Right Arrow."
The TV will show "Enter Factory Mode." Press "Menu" after message disappears and go do to
"Setup."
GV47
Press "Menu" then press the following combination: "Info," "8," "2," "0," "6."
Press "Menu" and then press the following combination: "0," "6," "2," "5," "9," "6"
Press "Menu" and then press the following combination: "1," "9," "9," "1"
VW22 / VS370E
Press "Mute" once OR "-" twice (the dash next to the "0") and then press the following
combination: "9," "8," "7," "6"
12-28-2012, 10:40 PM #7
12-29-2012, 04:58 AM #8
https://www.badcaps.net/forum/showthread.php?t=24809 5/9
16.02.2021 Factory Resets L st ng - Badcaps Forums
01-27-2013, 05:26 PM #9
service menu starts up - scrolling pages is done by color botton (green if not mistaking
*usefull for people who know what they are doing (not me at the moment)
-i found it usfull only for white wash for plasma TV's (just scroll throuh the menu untill you
see the white wash apears
Inside they are mostly Chinese generic boards and most respond to the following for factory
mode:
Hold down volume minus (Volume down) on set and press 'recall' on remote.
'Recall' is the button that activates the channel number and clock onscreen.
After you have made your changes, in most cases, pressing 'power' on the remote will clear
the factory mode.
On some models pressing the 'AV' button will revert things to normal operation.
In rare cases, the sequence first described above - (Vol - on set and recall on remote) will
have to be repeated at least once more.
If none of the above methods works, try using a universal remote - best one that has a LOT
of in-built models..!
Search through the available models looking for any that suddenly causes the set to change
channels.
Use the front panel buttons to scroll through available menus and make any changes. Power
off set to revert to normal functioning.
With power LED off (TV in fake standby or AC power plug removed) hold Vol- and
SOURCE/INPUT.
https://www.badcaps.net/forum/showthread.php?t=24809 6/9
16.02.2021 Factory Resets L st ng - Badcaps Forums
My Country: UK This may take up to 20 seconds.
Line Voltage: 230Vac 50Hz
I'm a: Professional Tech
Posts: 32,373 Look for a letter "K" on the side of the screen when it powers up. If this appears, continue. If
not, repeat the above procedure.
Press CH- and VOL- to access service menu. See if LAMP ERROR appears in listing. If so, then
a reset procedure is necessary
Page through the menus looking for "L ERR RESET". Execute the option (highlight and press
OK.)
James
Last edited by 3guk; 04-06-2013 at 06:37 AM..
https://www.badcaps.net/forum/showthread.php?t=24809 7/9
16.02.2021 Factory Resets L st ng - Badcaps Forums
05-16-2013, 01:18 AM #16
Page 1 of 7 1 2 3 4 5 6 7 >
https://www.badcaps.net/forum/showthread.php?t=24809 8/9
16.02.2021 Factory Resets L st ng - Badcaps Forums
Posting Rules
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Rules
https://www.badcaps.net/forum/showthread.php?t=24809 9/9