Professional Documents
Culture Documents
LFx – LF – SF
Class 0 clean air compressors
CLOSE-UP:
A BETTER DENTAL COMPRESSOR
YOU NEED QUALITY AIR DRY AIR REQUIRED
NO EXCUSES, NO COMPROMISES Compressed air contains moisture that can cause
National and international organizations have issued corrosion and rust. Depending on your needs, Atlas
health and safety norms that also apply to the air Copco compressors offer dew points as low as
used in dental practices. Our LFx, LF and SF series -40°C/°F to maximize the reliability and lifetime of
easily meet and exceed mandatory and self-imposed both your compressor and the equipment it powers.
quality criteria, giving you peace of mind at all times.
Compact air 3
2 “Super-flow” air inlet system for maximum
energy cost savings, extended lifetime and low
maintenance.
for small practices
7 3 High-performance aftercooler with two-phase drying:
• First cooling directly after compression, second
The Atlas Copco LFx is the quiet, reliable air solution
drying through extra cooling on the bigger
for the solo professional and small dental practices. compressor models
With a capacity range from 1.02 to 2.53 l/s (2.16 up • Extended lifetime of the membrane dryer and
to 5.36 cfm) and a maximum working pressure of 10 guaranteed dew point for the CD dryer
bar (145 psi), the LFx offers a dew point performance 1
as low as -35°C/-31°F.
4 A robust canopy reduces noise and offers higher
cooling performance.
large practices 4
2 Air-cooled scroll element offers proven operational
6 efficiency, reliability and durability.
1
Dental practices, hospitals and labs that need low
noise without compromising on compressed air 8 3 Premium efficiency IE3 class motor ensures lower
performance, will find the perfect solution with the energy consumption.
Atlas Copco SF series scroll compressors. Easy to 2
operate and maintain, the SF comes with a small 4 A sound-insulated canopy for noise levels as low as
footprint to save space. Two models, the SF and 53 dB(A) and installation close to the point of use.
5 7
SF+ series, are available depending on your flow
and dew point requirements. Operational features 5 A compact and optimized integrated refrigerant
include a 1.9 to 7.6 l/s (4.03 up to 16.10 cfm) capacity dryer for application-specific quality air
range, a maximum working pressure of 10 bar requirements.
(145 psi), and a dew point performance as low as
2°C/36°F. 6 High-performance aftercooler with two-phase
3
drying. First cooling directly after compression,
second drying through extra cooling on the bigger
Atlas Copco SF: compressor models.
FAD
1.9-7.6 l/s (4.03-16.10 cfm) 7 Automatic regulation stops the machine when
the required working pressure is reached to avoid
DPP down to 2°C/36°F unnecessary energy costs.
kW
hp 1.5-5.5 kW (2-7.5 hp) 8 The SF+ series comes with the high-end
Elektronikon® controller with monitoring features
up to 2 chairs, laboratories such as warning indications, maintenance
scheduling and online visualization of running
conditions.
bar psig l/s m3/min cfm l/s m3/min cfm kW hp db(A) % bar °C °F Standard receiver sizes (CE-ASME)
LFx D LFx D LF FF SF
24l, 50l, 90l 90l, 270l, 500l 30l, 270l
LFx D 0.7 10 145 1.02 0.06 2.16 1.35 0.08 2.86 0.55 0.7 61 0 0 45 113
LFx D 1.0 10 145 1.38 0.08 2.92 1.46 0.09 3.09 0.75 1 62 0 0 50 122 Standard voltages (IEC-CSA/UL standard)
LFx D 1.5 10 145 2.07 0.12 4.39 2.39 0.14 5.06 1.1 1.5 63 0 0 76 169 LFx D LF SF
LFx D 2.0 10 145 2.53 0.15 5.36 3.08 0.18 6.53 1.5 2 64 0 0 120 248 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz
LFx D FF-SDP 0.7 10 145 1.02 0.06 2.16 1.35 0.08 2.86 0.55 0.7 61 14 0.1 13 55 115/1 115/1 230/1 230/1 230/1 230/1
LFx D FF-SDP 1.0 10 145 1.38 0.08 2.92 1.46 0.09 3.09 0.75 1 62 14 0.1 18 64 230/1 230/1 230/3 230/3 230/3 230/3
230/3 230/3 380/3 460/3 400/3 380/3
LFx D FF-SDP 1.5 10 145 2.07 0.12 4.39 2.39 0.14 5.06 1.1 1.5 63 14 0.1 44 111
400/3 460/3 400/3 575/3 460/3
LFx D FF-SDP 2.0 10 145 2.53 0.15 5.36 3.08 0.18 6.53 1.5 2 64 14 0.1 88 190
500/3 380/3 575/3
LFx D FF-SDN 0.7 10 145 1.02 0.06 2.16 1.35 0.08 2.86 0.55 0.7 61 19 0.08 -10 14
LFx D FF-SDN 1.0 10 145 1.38 0.08 2.92 1.46 0.09 3.09 0.75 1 62 19 0.08 -5 23
LFx D FF-SDN 1.5 10 145 2.07 0.12 4.39 2.39 0.14 5.06 1.1 1.5 63 19 0.08 21 70
DIMENSIONS W (mm) D (mm) H (mm) Weight (kg)
LFx D FF-SDN 2.0 10 145 2.53 0.15 5.36 3.08 0.18 6.53 1.5 2 64 19 0.08 65 149 LFx D
LFx D 0.7-1 24l 550 525 800 47
LFx D FF-CD+ 0.7 10 145 1.02 0.06 2.16 1.35 0.08 2.86 0.55 0.7 61 24 0.1 < -35 <-31
LFx D 1.5-2 50l 870 355 890 65
LFx D FF-CD+ 1.0 10 145 1.38 0.08 2.92 1.46 0.09 3.09 0.75 1 62 21 0.1 < -35 <-31
LFx D 0.7-1 FF SD 24l 550 525 800 54
LFx D FF-CD+ 1.5 10 145 2.07 0.12 4.39 2.39 0.14 5.06 1.1 1.5 63 23 0.2 < -35 <-31
LFx D 0.7-1 FF SD 50l 870 505 890 72
LFx D FF-CD+ 2.0 10 145 2.53 0.15 5.36 3.08 0.18 6.53 1.5 2 64 22 0.2 < -35 <-31 LFx D 0.7-1 FF CD 24l 540 680 800 59
LF LFx D 0.7-1 FF CD 50l 870 515 890 67
LF 2 10 145 3.1 0.19 6.57 3.50 0.21 7.42 1.5 2 82 0 0 44 111 LF
LF 3 10 145 4 0.24 8.48 5.50 0.33 11.65 2.2 3 83 0 0 44 111 LF FF Fx 270l 1550 750 1130 220
LF FF Fx 500l 1950 750 1255 265
LF 5 10 145 8.2 0.49 17.37 11.10 0.67 23.52 4 5 83 0 0 55 131
LF FF CD 270l 1550 760 1250 227
LF 7 10 145 11 0.66 23.31 18.40 1.10 38.99 5.5 7 84 0 0 50 122
LF FF CD 500l 1950 820 1350 273
LF 10 10 145 15.5 0.93 32.84 24.20 1.45 51.28 7.5 10 86 0 0 80 176
SF
LF FF-Fx 2 10 145 3.1 0.19 6.57 3.50 0.21 7.42 1.5 2 82 0 0.35 7 45
SF FF 850 600 590 102
LF FF-Fx 3 10 145 4 0.24 8.48 5.50 0.33 11.65 2.2 3 83 0 0.35 7 45
2935 0822 43 © 2014, Atlas Copco Airpower NV, Belgium. All rights reserved.
Designs and specifications are subject to change without notice or obligation.
Read all safety instructions in the manual before usage.