Professional Documents
Culture Documents
C45 Round Bar is an unalloyed medium carbon steel, which is also a general carbon engineering
steel. C45 is a medium strength steel with good machinability and excellent tensile properties. C45
round steel is generally supplied in the black hot rolled or occasionally in the normalised condition,
with a typical tensile strength range 570 – 700 Mpa and Brinell hardness range 170 – 210 in either
condition. It does not however respond satisfactorily to nitriding due to a lack of suitable alloying
elements.
C45 round bar steel is equivalent to EN8 or 080M40. Steel C45 bar or plate is suitable for the
manufacture of parts such as gears, bolts, general-purpose axles and shafts, keys and studs.
Standard Grade C Mn P S Si Ni Cr
ASTM A29 1045 0.43-0.50 0.60-0.90 0.04 0.050
EN 10083-2 C45/1.1191 0.42-0.50 0.50-0.80 0.03 0.035 0.4 0.4 0.4
JIS G4051 S45C 0.42-0.48 0.60-0.90 0.03 0.035 0.15-0.35
4. Mechanical Properties of C45 Round Bar Steel Material
Pre heat to 750 oC – 800 oC, then continue heating to 1100 oC – 1200 oC maximum, hold until
temperature is uniform throughout the section and commence forging immediately. Forging is not
workable below 850 oC. Finished forgings could be air cooled.
We are strong on forged steel C45 round bar. Welcome enquiry of C45 steel materials.
Heat to 820 oC – 850 oC hold until temperature is uniform throughout the section, soak for 10 – 15
minutes per 25mm of section, and quench in water or brine. Or,
Heat to 830 oC – 860 oC soak as above and quench in oil.Temper immediately while still hand warm.
Surface hardness for C45 special steel round bar after flame or induction hardning:
DIN C45 round bar steel material and steel plate C45, flats are widely used in all industry for uses
which require more strength and wear resistance than the low carbon mild steel.
Quenched and subsequently tempered steel for C45 steel grade round bar, steel plate, flat and square
is used for axles, bolts, forged connecting rods, crankshafts, torsion bars, light gears, guide rods,
screws, forgings, wheel tyres, shafts, sickles, axes, knives, wood working drills, hammers, etc.
Welcome customers to inquiry DIN C45 round bar, CK45/1.1191 steel plate, flat steel for C45
steel price. We are professional supplier and exporter for more than 20 years. We offer you worldwide
solution for C45 round bar steel.