25 JANUARY 2021 AMERICIUM 3/E DANIEL FLORENTINO MANALASTAS
WORKBOOK 2
1. Normal range parameter of a BOILER WATER
Categories Normal Ranges Best action to do if
out of range P. Alkalinity 100 to 300 ppm COMBITREAT uses for raising the alkalinity which you just have to use 40l grams per tons and a 10kg may raise it by 50ppm.
Chlorides maximum of 200 Formation of
ppm chlorides can be controlled by manipulating the amount and time of boiler blow down. Categories Normal Ranges Best action to do if out of range pH Boiler 9.5 to 11 To control ph, you have to either remove water impurities or by adding chemicals to neutralize the condition pH condensate 8.3 to 11 Maintain condensate ph to neutralize acids by using volatile amine
2. Normal range parameters of a Engine Cooling water
Categories Normal Ranges Best action to do if out of range Nitrite 100 to 300 ppm To raise the nitrite level, you will have to add 2 kg of DIESELGUARD per tonne of water , which a 500 grams can raise the nitrite level, or 9 liters of ROCOR NB LIQUID per tonnes of water that a 2.1 liters per tonne of water can raise the water level.
Chlorides maximum of 50 To maintain the
ppm chloride level, manufactures suggested to use the distilled water for suggestions. Categories Normal Ranges Best action to do if out of range pH 8.3 to 11 N.B. buffering agents in NALFLEET ROCOR NB can maintain pH values