Professional Documents
Culture Documents
TITANbox
imagine.
cubicle could also be as trendy as one could
system eliminates the need for a top rail. The
1940
1830
together under heat and high pressure. HPL compact board has laminates
800 ~ 900mm by 1500 ~ 1800mm by 1940mm (W x D x H). Stainless Steel Thumbturn
on both sides with either matt finish or textured finish. The performance (w/occupancy
u Height of restroom compartment measured from FFL to the top of the Hinges
of the board is tested according to BS EN Standards and has the following indicator)
pilaster is 1940mm.
rating:
u Door width shall be between 600mm ~ 700mm for standard cubicles. Stainless Steel
19mm thick Door Knob
u Boiling Water (EN438-7) : 8.4 (Within max. 11.5) u Door width clearance shall comply with BCA’s Code on Accessibility in Cubicle Door
110
the Built Environment 2013 for the following: Finished floor level
u Fire Rating (EN476-6/7) : Class 1 (meet min. 1)
• Ambulant WC Compartment: minimum 800mm
u Impact (EN438-11) : 2.8 Newton (exceed min. 2.0) Stainless Steel
• Accessible WC Compartment: minimum 850mm
Box-up Stainless Steel
u Stain (EN438-15) : 5 (exceed min. 4) Box-up
u Scratch (EN438-2) : 4 Newton (exceed min. 2.0) Colours
1830
1940
19mm thick
All Pilasters shall be of 19mm thick HPL compact board with chamfered 02. SS Coat Hook (w/cover) Cubicle Door
edge, completed with Stainless Steel Thumbturn for locking doors. & Pilaster Stainless Steel
03. SS Tri Base Coat Hook
Colours different from doors are available upon request. The Pilaster shall Door Knob
be anchored to the floor using L-plates and covered with Stainless Steel 04. SS Thumbturn (w/occupancy indicator)
Box Up. Pilasters will be routered at its vertical ends to facilitate closure of 05. SS Lock Set (w/occupancy indicator)
110
doors. BESCO™ recommends standard pilaster width to be 300mm and Finished floor level
06. SS Long Lock Set (w/occupancy indicator)
end Pilaster width to be 150mm for maximum stability.
07. SS Hinge
X Stainless Steel Hinges
(left)
Stainless Steel
Box-up
Intermediate Partitions
All Intermediate Partitions shall be of 12mm thick HPL compact board
08. SS Ambulant hinge 1
with Stainless Steel U-channel, 21.5mm x 14.5mm x 1mm (cross-section 09. SS Box Up
09a. SS Side Cover
dimension, L x W x Thk), affixed at its ends (to the wall and pilaster).
09b. SS Front Cover (1200mm) Layout Plan of Section X-X
To improve stability of the system, BESCO™ recommends that length
exceeding 1800mm to be fitted with an extra Pedestal or increase thickness 10. SS U-channel (2200mm) Restroom Cubicle
to 19mm HPL compact board. 11. Black Rubber Sponge (1860mm)
b
a
01 02 03 04 05 06 07 08 09 10 11