Professional Documents
Culture Documents
name – AXIS.
assembled structure, lies the secret of a
fittings and embedded construction details,
system with great stability. With its concealed
1980
1830
structure. Stainless Steel
Each restroom cubicle will be equipped with the following accessories: Lock Set
HPL compact boards are manufactured from sheets of special kraft and u BESCO™ Stainless Steel Long Lock Set with occupancy indicator. (w/occupancy Stainless Steel
u BESCO™ Stainless Steel Coat Hook with rubber stopper comes indicator) Hinges Stainless Steel
decor papers, impregnated with thermosetting synthetic resins, fused
with/without cover and allow load up to 25kg. Lock Set
together under heat and high pressure. HPL compact board has laminates (w/occupancy
u BESCO™ Stainless Steel Hinges with cover, adjustable from fully close
on both sides with either matt finish or textured finish. The performance indicator)
of the board is tested according to BS EN Standards and has the following to open at interval of 15°.
150
u BESCO™ Stainless Steel Box Up with height 150mm and brushed finish. Stainless Steel Box-up Finished floor level
rating:
Compartment’s Dimension
u Boiling Water (EN438-7) : 8.4 (Within max. 11.5)
u Fire Rating (EN476-6/7) : Class 1 (meet min. 1)
The recommended restroom cubicle size:
800 ~ 900mm by 1500 ~ 1800mm by 1980mm (W x D x H).
Elevation 1 Elevation 2
u Impact (EN438-11) : 2.8 Newton (exceed min. 2.0) u Height of restroom compartment measured from FFL to the top of the
u Stain (EN438-15) : 5 (exceed min. 4) Pilaster is 1980mm.
u Scratch (EN438-2) : 4 Newton (exceed min. 2.0) u Door width shall be between 600mm ~ 700mm for standard cubicles.
u Door width clearance shall comply with BCA’s Code on Accessibility in
It is a natural occurrence under various climatic conditions that HPL the Built Environment 2013 for the following:
compact boards may undergo dimensional changes of tolerance • Ambulant WC Compartment: minimum 800mm
differences within ±5mm. • Accessible WC Compartment: minimum 850mm
X
HPL compact boards used in our systems are certified by Singapore Colours
Environment Council with Singapore Green Label. BESCO™ recommends that the System shall be of a single colour. Colour
differences from Doors, Pilasters and Intermediate Partitions are available
Doors upon request. The price will vary due to multiple color selections. Customised 19mm thick Door panel and Pilaster
All Doors shall be of 19mm thick HPL compact board with chamfered edge. Intermediate
Partition Stainless Steel Coat Hook
Each will be supported by 3 Stainless Steel Hinges (4 Stainless Steel Hinges Finishes
for Door width ≥ 750mm or Door height ≥ 2100mm) affixed to the Pilaster, HPL compact boards are available in a variety of brilliant colours, 50mm x 50mm square tube frame
completed with Stainless Steel Coat Hook and Stainless Steel Lock Set. woodgrains and tactile patterns. For surface finishes, you have the choices 2 10mm x 50mm flat metal frame
1830
1980
Doors will be routered at its vertical ends and incorporated with Rubber of matt or glossy. Stainless Steel Lock Set
Sponge to dampen noise. The floor clearance is 150mm.
Installation
Stainless Steel Box-up
Installation will be executed under the supervision of BESCO™’s site
Intermediate Partitions (Galvanised steel frame structure)
supervisor(s) and shall be carried out in accordance with BESCO™
All Intermediate Partitions shall be constructed with galvanised steel
installation instructions.
square tube 50mm x 50mm x 1mm (cross-section dimension, L x W
150
Finished floor level
x Thk), encompassing four telescopic adjustment tubes (30mm) for
Part Numbers
alignment purpose. Intermediate Partitions include 12mm HPL compact
Stainless Steel Hinges
board internally for the fixing of toilet paper dispensers. Partitions shall be 01.
02.
SS Long Lock Set (w/occupancy indicator)
SS Coat Hook (w/cover)
X (left)
completed with 6mm thick (3mm, strength distribution + 3mm, surface
finishing) HPL compact board cladded on both sides. 03. SS Tri Base Coat Hook 1
04. SS Hinge (w/cover - Left)
All Intermediate Partitions will be anchor to floor using bolts, chemical
adhesive and shall be covered with Stainless Steel Box Up. All end
05.
SS Hinge (w/cover - Right)
SS Ambulant hinge
Layout Plan of Section X-X
intermediate partitions shall be embedded onto back walls, secured with
anchor bolts and chemical adhesive. (For galvanised steel frame details, 06. SS Box Up Restroom Cubicl
please refer to drawing). For ultimate stability of the system, BESCO™ 06a. SS Side Cover
recommends that the length shall not exceed 1800mm. 06b. SS Front Cover (1200mm)
07. Black Rubber Sponge (1860mm)
b
a
01 02 03 04 05 06 07