You are on page 1of 1

®

ConCore : CC3000 Panel-24"


SPECIFICATIONS
(4 ea) PosiLock holes General information

Draw quality steel Panel weight : 12 lbs./ft² bare.


bottom pan with All steel welded construction filled internally with a
Welded structural dome design cementitious core material.
assembly at Protected from corrosion by an epoxy paint finish.
domes and Cementitious Painted finish Class A flame spread rating.
perimeter core material
Non-combustible material.
Full hard cold
rolled steel
UNDERSTRUCTURE OPTIONS
top sheet 2" Deep x 4' Bolted Stringer w/ 8 ga. fillet welded
heads

COVERING OPTIONS
Tile factory laminated with integral trim edge
1/8" HPL________________(Color)________________
1/16" HPL_______________(Color)________________
TOP VIEW 1/8" Conductive HPL___________(Color)____________
1/16" Conductive HPL__________(Color)____________
For additional laminate options contact Inside Sales

Bare Panel For 2" Deep


Bolted Stringer

1-3/8" deep
1-5/8" deep at corners

Laminated Panel With Integral Trim


For 2" Deep Bolted Stringer

1-3/8" deep
1-5/8" deep at corners
CORNER DETAIL

System Performance Criteria (Tested on Actual Understructure)*


System Type SYSTEM STATIC LOADS ROLLING LOADS IMPACT
WEIGHT Design Ultimate Loads Safety Factor 10 Passes LOADS
Panel Understructure 10,000 Passes
Loads
ConCore CC3000-24" 2" Deep Bolted 13 lbs / ft² 3000 lbs Min. 6000lbs 2700 lbs 2400 lbs 300 lbs
Min. 2
Stringer 64 kg / m² 1361 kg Min. 2722kg 1225 kg 1089 kg 136 kg

1. System Design Load is based on permanent set ≤ 0.010" and is verified by loading panels in accordance with the CISCA concentrated
load method but with panels installed on actual understructure instead of steel blocks. (Testing on blocks does not represent performance
of an actual installation.) Ultimate, Rolling, and Impact Load tests are performed using CISCA test procedures.
2. Safety Factor is Ultimate Load divided by Design Load.

Tate Access Floors, Inc. © 2010 Tate Access Floors, Inc.


7510 Montevideo Road R 10/2018
Jessup, MD 20794
Tel (410) 799-4200 Fax (410) 799-4207

You might also like