You are on page 1of 1

BODY ELECTRICAL — WIPER AND WASHER BE-55

JSTOPPED VEHICLE INTERMITTENT WIPER FUNCTION


D When the wiper switch is changed to the LO position while the vehicle is stopped, the wiper operates three
times in LO. It then switches automatically to an intermittent operation with an interval time of
approximately 2.5 seconds.
D When the automatic control adjuster is in the FAST position, the wiper operates in LO when the vehicle
is stopped.

" Timing Chart A

LO Position
Wiper
Switch
Other Positions

Motor Detection +B
Switch Signal
GND

T1 T1 T1
Operating
Wiper
Operation Stopped

Except LO Operation LO Operation INT Operation


BE
T1: Approx. 2.5 sec.
285BE36

NM
0810E

You might also like