Professional Documents
Culture Documents
LT8xA
MODEL NO.
USER’S MANUAL LT8xA Series
Safety Precautions ---------------- 3
Installation Precautions ------------------------ 3
Pre-Use Precautions ------------------------ 4
Precautions For Use ------------------------ 5
Appendix ---------------- 32
Product Specification ------------------------ 32
A/S ------------------------ 33
Product Warranty ------------------------ 34
Installation Precautions
The power cord used in the product must be Be careful of impact when transporting.
used in our company. Use the code provided. - It's the cause of the failure.
-Do not connect or process power lines randomly.
Risk of electric shock or fire.
This product is dedicated to 220V, so make It's got to be grounded. Use it.
-Causes malfunction and electric shock.
sure to supply it. Check and use the power.
Grounding Terminal
AC 220v
주의
CAUTION
Failure to follow the instructions may result
in personal injury or property damage.
3
Pre-Use Precautions
• The administrator must be present to prevent accidents such as instrument management and
instructions for use.
• All users must be familiar with safety rules and usage before using them.
• Be sure to check the safety precautions before starting exercise.
• It is recommended to use indoor temperatures below 35°C and below 60% humidity.
• Before starting an exercise program, all users need to find a specialist or doctor to check their
physical condition. Please check.
• Take extra care not to get caught in the product by any part of the body or by any shoelaces or
sportswear while the belt is rotating.
• Do not block the vents of the product with towels, curtains, etc.
• As this product is operated using electrical equipment, special care must be taken to prevent
damage from electric shock and other disasters.
• Always turn off power when not in use to prevent electric shock.
• Do not place any type of liquid on the unit except shelves or cup holders.
• Do not place products such as candles with lights or firearms on them.
주의
CAUTION
Failure to follow the instructions may result
4 in personal injury or property damage.
Precautions For Use
• Avoid moist areas and direct sunlight and never touch the plug with wet hands.
• Always remove the power cord and cable from the product when moving the product.
• Be careful not to damage the control and switch points of the product, etc.
• Do not put your hands inside or under the unit during operation.
• Do not insert any foreign substances into the product. This can cause the fault
EMERGENCY
STOP • Never leave a running product unattended.
• If you feel suffocated, dizziness, pain, or difficulty breathing during exercise, you should stop
exercising immediately.
• Do not use after drinking or if excessive fatigue is accumulated.
• You are not eligible for warranty service if you change or repair the device at your discretion.
주의
CAUTION
Failure to follow the instructions may result
in personal injury or property damage.
5
Product Features
The LT8xA Series uses its own proprietary mechanisms to provide user safety
and ease of use.
6
Dual Speed/Slope Button maximizes user convenience
Main Screen
- Various motor information displays
- Touchscreen display
- 7 languages available
(Korean, English, Japanese, French, Spanish, Russian, German)
8
Display Console Part Configuration
The LT8xA Series maximizes user convenience by applying a 23" screen
touchscreen-enabled TV built-in display.
Touch screen Display : Motion information display and each function can be set
Card(RFID) Touch Part : Motion prescription program is available using RFID CARD
(OPTION : Only for applying Korea market )
Control Button Part : Motion start and stop, screen off, program selection, slope and speed
control are possible
Emergency Stop Button: Press to stop the emergency stop if it is necessary during exercise.
USB Input
10
UI Screen Configuration
• HEART RATE : Display heart rate when the user holds the
handle sensor of the equipment or when he or she wears
(OPTION) a polar cardiac measurement tether during exercise
11
How To Use the Function Button
• Pressing the STOP button during exercise reduces the speed by 0.1 Km/h
Press one more time to stop and automatically change back to START Button
12
How To Use the Program Button
USER Mode
Health club administrators or users can set up programs at random to exercise
Up to three USER programs can be set(USER1, USER2, USER3)
Users can choose the language they like and then exercise
You can enter the Settings menu by pressing the Select Language Button
13
Composition and Use of Membrane Button Parts
Enter Button
Use when setting up a program
TV Setting Button
Volume control, channel movement, and TV menu buttons
14
Quick Start
■ You can exercise immediately with easy operation.
Pressing the START/STOP Button on the STOP or membrane on the touchscreen immediately
applies a gradient of 0%, decreasing speed by 0.1 km/h, and operating for a period of time
Press once more, stop immediately
Pressing the COOL DOWN Button in the membrane, operating in clean-up mode
The gradient is applied immediately to 0%, and the speed is reduced according to the clean-up
exercise program Press once more, stop immediately
Select one of the following : Slope (SLOPE), Hill (HILL), or Mountain (MOUNTAIN)
If you want to stop during exercise, you can press the STOP Button to
stop.
Press once to apply the gradient to 0% immediately, and reduce the
speed by 0.1 Km/h.
Press the button once more to stop immediately.
16
■ Maximum Slope and Maximum Speed in Three PROGRAMS (SLOPE, HILL, MOUNTIN)
You Can Exercise by Readjusting.
Select one of the following : Slope (SLOPE), Hill (HILL), or Mountain (MOUNTAN)
Enter the maximum slope, maximum speed, exercise time, age, weight, gender, and press the OK
Button.
The value you enter will be reset by subtracting the difference between the values you enter
from the set value.
Press START Button to start the movement after completion of the input.
17
Heart Rate Control Exercise Method(HRC)
■ You can work out by setting up a Target Heart rate Program (HRC).
Setting the target heart rate after setting the maximum speed and slope will adjust the
speed and slope to match the target heart rate.
Enter Maximum Slope, Maximum Speed, Exercise Time, Age, Weight, Gender, Target Heartbeat and press the
OK Button.
Press START Button to start the movement after completion of the input.
18
User Program Exercise Method(USER)
■ Depending on the user, you can set up a user program (USER) to exercise.
During the movement, you can adjust the speed and gradient of one section of the Graph Bar
and move on to the next section to operate with the reset PROGRAM.
15 Select interval 1 through 15, enter the slope and speed, then press the OK Button.
Press START Button to start the movement after completion of the input.
19
How To Use Multimedia Screen
■ The LT8xA Series has a built-in TV 23" LCD.
The multimedia screen is easy to use.
The BACK Button on the Run screen allows you to run the Backward.
You can return to the main screen by pressing the EXIT Button on the
running screen.
20
How To Use Bluetooth Earphones
■ The LT8xA Series features Bluetooth earphone pairing.
You can choose the earphones you want and use them in pairs.
Press the Home button or the EMERGENCY Button to return to the main.
21
Product Management Precautions
■ Please refer to the product for prevention of malfunction and smooth operation.
The product will be extended by regular management, so please follow the
instructions below.
A. Always keep your product clean to ensure that it is performing at its best.
B. Always make sure that the power is OFF when the product is not in use.
C. Always remove power cables, etc. from the unit when moving.
E. After disconnecting the power cable once a month, open the motor cover and vacuum
the vacuum cleaner. Remove dust accumulated inside by using the tool.
G. The running belt/deck shall be checked for wear once a month after 2 years of purchase
H. When cleaning sweat or foreign substances on the surface of the product, make sure to
22
Product Failure Action Method
■ Please note the following if you believe that the product is faulty or malfunctioning
during use. However, if it is not listed below, please contact our distributor or A/S center.
A. In case power is not turned on
- Make sure that the power cable is properly connected to the outlet.
(Main Power Unit, Product Connection)
- Check the product main switch. (Check Power On)
- Check the running machine monitor unit product power switch. (Check Power On)
- Check and replace fuses on the main switch of the product (15A small tube fuse or automatic)
B. When power is turned off during use, the belt is still turned, or an error is displayed on the monitor
- Turn off the main power switch and re-operate after 1 minute.
- Check the cable connection again.
- If no action is taken, please contact the A/S center.
C. Power comes in during use and is not working
- Check the cable connection again.
- Turn off the main power switch and re-operate after 1 minute.
- If no action is taken, please contact the A/S center.
23
How To Take Action If The TV Screen Does Not Appear
■ If the TV screen does not appear, check the antenna cable connection on the back of the
product
■ Changes in internal channels of cable stations or changes in cable stations may result in
different channel information The TV screen may not appear
In this case, please set the automatic channel settings as shown below
■ Press the Application button during the right function button and enter the password 1998
■ Select TV MENU
24
■ Press MENU Button, then select the TV in the left menu as the UP/DOWN Button.
As above, please contact the customer center if the customer does not improve after taking.
25
Error Message Action Method
■ The error message is designed to be displayed when the instrument detects an error.
If the error message is displayed on the monitor, take the following steps
◆ Abnormal Sign and Content (Inverter Error)
Inverter heat-discharge - The ambient environment temperature is too high. Cooler Installation
OH
pin
Inverter - There is a heating element near the inverter. exothermic removal
Temperature of
Superheat
approximately 95°C - Inverter cooling fan fault. Replace cooling fan
OE
Main circuit DC voltage over
- The deceleration time is too short. It's either a long de
voltage
Main circuit Exceeding the detection level - The regenerative energy from the motor is too large. Connect the braking resistor
Overvoltage 200V class: 410V
400V class: 820V
- Power voltage is too high. Reduce voltage to power specification.
Main circuit DC voltage low
LE voltage - Condensation of input power.
Cause investigation,
Main circuit Below Sensory Level - There's been a patrol outage.
reset after action
low tension 200V Class: 190V - The voltage variation of the input power is large.
400V class: 380V
GF Ground Abnormal
Check motor isolation
Ground Detection - Inverter 3-phase output current unstable
Inverter Replacement
abnormality Level Exceed
Check the size of the load.
- The load is too large. Acceleration, Acceleration/Slow Speed and
deceleration and cycle time are too short. Cycle
OL Compared to the Check the length of the liver
Inverter inverter rating,
Overload 150% of output current - V/f characteristic voltage too high. V/f Check Features
last more than 1 minute greater capacity of inverter
- Inverter capacity is too low.
replace with
Check the load size.
- The load is too large. Acceleration, High acceleration/reduction
Compared to the motor deceleration and cycle time are too short and cycle
OL1 rating, Check the length of time
Motor 150% of output per - V/f Attribute voltage too high. V/f Check Features
Overload minute
Abnormal Continuation Setting the rated current of the
- Motor rated current setting (F026) incorrect.
motor Check (F026)
Error Message If the same symptom occurs after the action is taken, please contact the customer center.
26
◆ Abnormal Sign and Contents (Main Controller Error)
CE No communication
1 minute after power down
Inverter between the inverter and - Inverter/mainboard temporary error
Communication Err the main control board Re-supply after power
Error Message If the same symptom occurs after the action is taken, please contact the customer center.
27
How To Set Admin Mode
START-PROGRAM-ENTER Pressing the Buttons in turn will display the reset screen as shown below.
28
Enter Password 1998 with the right keypad and touch OK.
29
Network Set up Method
■ You can set up your network to use the Internet and YouTube features.
Select the function selection button Application and enter the password 1998.
Run Network Setting during the menu.
When the network you want to use is complete, touch the center of the
screen or press the EMERGENCY Button to return to the main screen.
As above, please contact the customer center if the customer does not improve after taking.
30
Android OS Update Method
■ Android OS updates can be made for enhanced functionality.
Select the function selection button Application and enter the password 1998. Run Download
from the menu.
Insert the USB containing the installation file into the USB terminal, select the correct Apk file and
proceed with the installation. When the installation is complete, turn off the product and turn it on
again.
31
Product Standard
Model
Category LT8xA LT8A
Incline 0-16% -
Motor 4HP
Driving System AC 3-phase 4-Pole 2.2Kw Controller Inverter, 485 Communication Control
Dimensions
Length 2,110mm X Width 920mm X Height 1,620mm
(L83” X W36.2” X H63.7”)
Display Information
Slope, Heart rate, Distance, Speed, Time, Calorie, TV Viewing, Multimedia Screen
TV Internal 23" TFT LCD, touchscreen, multimedia USB playback,
Console Options
Supports cellular wireless charging devices, smart mirroring and Bluetooth earphones
Safety Device Emergency stop switch, Belt Tension Control and Rear Cover
The specifications, design, and color of this specification can be changed without notice to improve quality.
32
A/S Announcement
1. If a fault occurs during normal use within the 2-year warranty period, we will repair it free
of charge. (Excluding consumable parts)
33
Warranty Statement
Customer
Address
Agency
Address
Warranty Period
LEXCO
LEXCO CO,. LTD.
Head Office & Factory
7-22,Technodae-ro 2, Hyeonpung-eup, Dalseoung-gun Daegu, Korea
Tel: 82-53-593-8220 Fax: 82-53-593-8225
www.lexco.kr
lexco@lexco.kr
Head Office & Factory
7-22,Technodae-ro 2, Hyeonpung-eup, Dalseoung-gun Daegu, Korea
Tel: 82-53-593-8220 Fax: 82-53-593-8225
www.lexco.kr
lexco@lexco.kr