(1) Wear and damage of gear (2) Clogging of oil hole (3) Wear and rotation of bearing
Inspecting the Clutch Gear IAQE-29
13. Clutch drum inspection
(1) Crack, damage and biting (2) Wear and damage of gears (3) Clogging of oil hole (4) Wear and damage of seal ring (5) Seal ring side clearance Limit value: 0.3 mm (0.012 in.)
Inspecting the Clutch Drum 1~08-23
14. Clutch shaft inspection
( 1) Wear and damage (2) Clogging of oil path (3) Looseness of shaft end plug (4) Damage and deformation of spring pin
Inspecting the Clutch Shaft LAQS-17
(5) Wear and damage of seal ring
(6) Seal ring side clearance Limit value: 0.29 mm (0.011 in.)