The document provides inspection standards for various components of a clutch system. It lists the thickness standard and service limit for the pressure plate, clutch plate, and clutch disc. It also provides curvature inspection standards and limits for the camber plate. Finally, it lists the free length standard and service limit for inspecting the clutch return spring.
The document provides inspection standards for various components of a clutch system. It lists the thickness standard and service limit for the pressure plate, clutch plate, and clutch disc. It also provides curvature inspection standards and limits for the camber plate. Finally, it lists the free length standard and service limit for inspecting the clutch return spring.
The document provides inspection standards for various components of a clutch system. It lists the thickness standard and service limit for the pressure plate, clutch plate, and clutch disc. It also provides curvature inspection standards and limits for the camber plate. Finally, it lists the free length standard and service limit for inspecting the clutch return spring.
discoloration of clutch plate Thickness standard: 2.0 mm (0.079 in.) Service limit: 1.8 mm (0.071 in.)
Wear, damage, burn, deformation and
discoloration of clutch disc Thickness standard: 2.6 mm (0.102 in.) Service limit: 2.4 mm (0.094 in.)
inspecting the Clutch Plate and LAQ~-10.9
Clutch Disc (4) Wear, damage, deformation and dis- coloration on camber plate Curvature inspection Lay the camber plate face down on the surface plate and measure its inner cir- cumference and i t s inside height. Standard curvature: 3.4 mm (0.134 in.) Service limit: 3.1 mm (0.122 in.)
Inspecting the Camber Plate 1.~0~438
8. Clutch return spring inspection
(1) Break and fatigue of spring Free length: 62 mm (2.44 in.) Free length service limit: . 56 mm (2.20 in.) (2) Damage of spring retainer