You are on page 1of 1

(9) Assemble the bearings on the forward

gear and the reverse gear.


@ Bearing
SST 09608-350 1 4
@ Snap ring

Reassembling the Bearing y06-34

(10) Reassemble the forward and reverse


gears on the clutch shaft.
SST 09608-3501 4

Caution:
0 Align the serration of the clutch Idisc with
a screwdriver, etc. before reassembling.
0 Do not confuse the forward side with the
reverse side.
(Confirm them by the number of teeth.)

Reassembling the or ward and Reverse Gears mas-6, 8

(11 ) Spacer
(12) Snap ring (on the forward gear side)

Reassembling the Spacer 1.~06-18,15

Reassembling the Bearing ~~14-28 '

You might also like