You are on page 1of 1

23. Install the oil strainer.

( I ) Packing
(2) Oil strainer
(3) Set bolts

Reassembling the Oil Strainer LAQIS-18

INSTALLATION

Follow the removing procedure in the reverse


order.

Caution:

-
0 Oil filter tightening torque
T = 1.5 2.0 kg-m (10.8 -- 14.4 ft-lb)

Reassembling the Oil Filter ~~015-36

0 See the following cautions for assembly operation.


1. Assembly of the stator shaft and oil pump.
2. Assembly of the torque converter.
3. Assembly of the upper cover and control valve ASSY.
4. Assembly of the front axle.
(When removing the front axle by the front axle with torque converter method.)
5. Assembly of the engine.
(When removing only the transmission on the engine side.)

You might also like