Professional Documents
Culture Documents
Communication Systems
Submitted By:
Registration No:
Section:
Student Signature:
Accuracy The student completed The student completed The student completed all
( <50%) tasks and provided partial tasks (50% - <90%) required tasks (90%-100%) with
MATLAB code and/or with accurate MATLAB accurate MATLAB code and/or
Simulink models with errors. code and/or Simulink Simulink models. Correct 30%
Outputs shown are not models. Correct outputs are outputs are shown in form of
correct in form of graphs (no shown in form of graphs labeled graphs and/or tables
labels) and/or tables along (without labels) and/or along with correct analysis or
with incorrect analysis or tables along with correct remarks.
remarks. analysis or remarks.
Following Directions The student clearly failed to The student failed to follow The student followed the verbal
follow the verbal and written the some of the verbal and and written instructions to
instructions to successfully written instructions to successfully complete
complete the lab successfully complete all requirements of the lab
requirements of the lab 20%
Time Utilization The student failed to The student failed to The student completed the lab in
complete even part of the lab complete the entire lab in its entirety in the allotted
in the allotted amount of the allotted amount of time amount of time
time 20%
Transmitter
Process…………
Process…………
Process…………
Process…………
Listen the signals again and observe the difference in quality. Why
Process…………
STEP 6, the modulated signals are filtered in the given band and added together
Process…………
Multiplexed Signal
Channel
Process…………
Receiver
Process…………
First Signal
Second Signal
Third Signal
STEP 9, each recovered band is demodulated to return the signal at the indicated frequency
Process…………
STEP 10, the recovered signal is passed through a low pass filter
Process…………
First Signal after passing through LPF
Process…………