Professional Documents
Culture Documents
121 ScribdManual e
121 ScribdManual e
Polyalphaolefin: similar to mineral oil, easily mixable with mineral oil, some approved for use with
foodstuffs.
Good gear lubricants all have a load stage scuffing value of 12.
▪ Scuffing temperature θs:You can also enter the scuffing temperature for the scuffing test
procedure.
▪ Micropitting process: Selection options
▪ No information available for load stage micropitting
▪ C-GF/8.3/90 (FZG)
▪ Load stage micropitting test: The best achievable load stage is 10.
▪ Densityϱ: [kg/dm3]
▪ Cone penetration at 25°C (grease) Pe: [0.1mm] This value is only required to calculate grease-
lubricated plain bearings.
▪ Soap proportion (grease) cs: [Vol%] This value is only required to calculate grease-lubricated
plain bearings.
▪ k coefficient, s coefficient (compression viscosity) k, s: Coefficient used to calculate
compression viscosity (AGMA 925):