Professional Documents
Culture Documents
MOULDING BOX
SUBMITTED BY:
18-ME-15
18-ME-84
18-ME-90
18-ME-96
18-ME-126
SUBMITTED TO:
SIR ABDULLAH
MOULD BOX:
The purpose of a mold box is to contain the liquid rubber (after it is poured over and
around a model) until the liquid turns to a solid. ... If you make molds of flat – two
dimensional models on a regular basis and require a mold box there are a number of
TYPES OF MOULD:
1-OPEN mould
In which the liquid metal is simply poured until it fills the open cavity.
2-Closed mould
The closed mold is provided to permit the molten metal to flow from
outside the mold cavity. The closed mold is more important categories in
1- Cutting:-
we operate cutting opration to cut 7 feet strip of cast iron into 4 strips
2- Welding:-
thermoplastics, by using high heat to melt the parts together and allowing
metal-joining techniques such as brazing and soldering, which do not melt the
base metal.
shape of rectangular. Similarly we made another box and then we weld the
painting to prevent moulding box from all external and chemical effect
because cast iron easily attacked by external agent which cause oxidizing