- Everyone must collect the answer sheet in .pdf before Friday 24:00 WIB at http://bit.ly/Tutorial08MS2110 - The tutorial will be conducted on Saturdays, 09:00 – 11:00 WIB - Your filename should be in format: K0X_NIM_Name.pdf with X is your class number. For instance: K01_13119500_Ganesha
1. The uniform sign has a weight of 2000 lb
and is supported by the pipe AB, which has an inner radius of 2.75 in. and an outer radius of 3.00 in. If the face of the sign is subjected to a uniform wind pressure of p = 150 lb/ft2, determine the state of stress at points C and D. Then, determine the principal stress and maximum shear stress at points C and D by Mohr Circle. Show the results on a differential volume element located at each of these points. Neglect the thickness of the sign, and assume that it is supported along the outside edge of the pipe.
2. Determine the equations of the elastic
curve using the x1 and x2 coordinates, and specify the slope at A and the deflection at C. EI is constant. Use integration method.
3. When the diver stands at end C of the
diving board, it deflects downward 3.5 in. Determine the weight of the diver. The board is made of material having a modulus of elasticity of E = 2(103) ksi. Use integration method.