- Everyone must collect the answer sheet in .pdf before Friday 24:00 WIB at http://bit.ly/Tutorial03MS2110 - The tutorial will be conducted on Saturdays, 09:00 – 11:00 WIB - Your filename should be in format: K0X_NIM_Name.pdf with X is your class number. For instance: K01_13119500_Ganesha
1. The beam is made from three boards nailed
together as shown. If the moment acting on the cross section is M = 1000 Nm, determine the maximum compressive and tension stress of the beam. Also sketch the stress distribution acting over the cross section.
2. Determine the moment M that must be applied to
the beam in order to create a maximum stress of 100 MPa. Also sketch the stress distribution acting over the cross section.
3. The tubular shaft is to have a
cross section such that its inner diameter and outer diameter are related by di = 0.6do. Determine these required dimensions if the allowable bending stress is allow = 200 MPa.