Professional Documents
Culture Documents
The craft of HUSAR products takes place in Poland and all of them are based on the highest quality materials and components available on the
worldwide market.
Every single of our products consists of label which provides the following information : The date of crafting Last name of the crafter Unique serial
number which provides you a special care we offer in terms of three years warranty.
*Every complaint and other reports are examined based on the serial number of the product
For active service members we administer a discount. For others the discounts are granted individually based on the submitted orders.
Fo
Laser cutted cordura laminate front panel for Noble, Concrete and NBS
Low profile front panel Fits Noble, Concrete and NBS plate carriers
Fits Noble, Concrete and NBS plate carriers
Front kangaroo flap based on Concrete chestrig Standard kangaroo front panel
Fits Noble, Concrete and NBS plate carriers Fits Noble, Concrete and NBS plate carriers
Fits Noble, Concrete and NBS plate carriers
Compatible with Quick-Release system
The possibility of attaching magazines in any direction
Set of low profile pads for Noble and Concrete plate carriers
Set of shoulder pads for Noble, Concrete, NBS,
Skirmish chestrig, Concrete chestrig
Additional foam pad included
Light chest rig made out from laser cutted cordura laminate
Best for situations where low profile gear is essential
but you still want to carry lot of gear
Can be used as a front flap in the NBS plate carrier with special adaptors
Set of shoulder pads for Noble, Concrete, NBS,
Skirmish chestrig, Concrete chestrig
Additional foam pad included
Set of suspenders made out from laser cutted cordura laminate which allows
to create chestrig out of any front panel
Cover for velcro included made out from Husar Skin
Riggers belt in 40mm wide with Cobra D-Ring buckle in matching colour
Available sizes: S to 85cm, M 85-105cm, L 105-125cm, XL 125-145cm
Riggers belt in 40mm wide with Cobra D-Ring buckle in matching colour
Compatible with Husar Belts
and laminate molle panels
Four attach points
Available sizes: S to 85cm, M 85-105cm, L 105-125cm, XL 125-145cm
Fully adjustable elastic system on the back
Standard Witchdoc IFAK but 2 molle wide
Pocket on the front for latex gloves
Insert mounted on velcro and paracord with 20mm fastex buckle
Possibility of using the insert out of the pouch as a closed packet which can be used
separately
Small edc med pouch for latex gloves and resucitation mask
Opened by pull tab
Adaptors for attaching waist packs under the front flap of the plate carriers
Bigger version (+) of the standard Admin Pouch
Admin panel with possibility to use as a waist pack (belt included)
Flat pocket on the front closed with Velcro zipper insert
Nylon pocket and rubber webbing sewed into different size
compartments in the inside
Rubber webbing that holds front pocket in place when the admin
panel is opened
Shockcord on the bottom for carrying things as gloves or 0,5 litre bottle Nylon raincover for waistpacks
Molle system on the back Shockcord adjustment
Rubber webbing sewed into different size compartments, nylon pocket and d-ring
Rubber webbing sewed into different size compartments, nylon pocket and d-ring
Due to elastic webbing regulation it fits most of the magazines on the market
Possibility of holding 1 or 2 magazines (depends on magazine type)
Contains detachable flap
Pouch for 2 rifle magazines with additional cover
40mm grenade pouch
Compact size
Size of pouch: 7,5cm x 6cm x 1,5cm
Size of signal panel: 50cm x 50cm
IR square on Velcro in the middle of signal panel
Neoprene isolation inside pouch
Holds 1 litre bladder
Patch wall made out from velcro which can be attached to any Surface
Great for storing many patches in one place
Patch wall size: 82,5cm x 52,5cm
Set of simple suspension system for small backpacks and hydration pouches
Helmet cover
Please specify type and size of helmet
Breathable cushion from 3d-mesh which allows to stay dry during action
Velcro one-wrap that allows you to manage cables
Paracord loop
One size fits all – passive or active hearing protection like Peltor or MSA Counterweight pouch designed to be mounted on our helmet cover
Two inserts with compartments for batteries or other similiar objects
Longe for holding weapon while not used
Double rubber for strong tension
Big hook which allows easier weapon catch
Fast and easy attachment to the vest