Professional Documents
Culture Documents
A164522R01v06
D16X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800/4x2300-
3800-10x65-2x15.5i/2x18i/2x17i/2x17.5i/22i/22i-10xM-R
EasyRET 32-port 2L6H FDD /2x(2.3-3.8GHz) 8T8R TDD Antenna with Integrated
RCUs - 2.0m
Electrical Properties
2 x (690 - 960)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960
Electrical Properties
2 x (1427 - 2690) 2 x (1695 - 2200)
2 x (2490 -
Frequency range (MHz)
2690)
1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200
Gain (dBi) 15.2 16.7 17.3 17.8 18.2 16.4 16.9 17.7
Vertical 3dB beam width (°) 9.3 7.6 6.8 6.2 5.4 7.8 7.2 5.6
Front to back ratio , ±30° (dB) Typ. 26 Typ. 26 Typ. 26 Typ. 26 Typ.26 Typ. 26 Typ. 26 Typ. 26
Cross polar ratio (dB) 0° Typ. 18 Typ. 18 Typ. 18 Typ. 18 Typ. 18 Typ. 18 Typ. 18 Typ. 18
1
Preliminary Issue
A164522R01v06
D16X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800/4x2300-
3800-10x65-2x15.5i/2x18i/2x17i/2x17.5i/22i/22i-10xM-R
EasyRET 32-port 2L6H FDD /2x(2.3-3.8GHz) 8T8R TDD Antenna with Integrated
RCUs - 2.0m
Calibration Max. phase tolerance from calibration port to input ports (°) 6 8
and
Ports VSWR 1.5 1.5
electrical
parameters Co-polarization isolation between ports (dB) ≥ 20 ≥ 20
Intraband isolation
Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23
Interband isolation between Lp1 and Rp2 ≥ 22 ≥ 26
Notes:
65°broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based
on site requirements and auxiliary equipment conditions.
2
Preliminary Issue
A164522R01v06
D16X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800/4x2300-
3800-10x65-2x15.5i/2x18i/2x17i/2x17.5i/22i/22i-10xM-R
EasyRET 32-port 2L6H FDD /2x(2.3-3.8GHz) 8T8R TDD Antenna with Integrated
RCUs - 2.0m
5G NR Electrical Properties
2300 - 3800
Frequency range (MHz)
2300 - 2690 3300 - 3800
Gain (dBi) 15.0 16.5
Horizontal 3dB beam width (°) 90 70
Front to back ratio (dB) Typ. 22 Typ. 22
Single column beam Cross polar ratio (0°) (dB) Typ. 15 Typ. 15
Vertical 3dB beam width (°) 8.0 5.6
Side lobe suppression for first side lobe above main
15 15
Radiation beam (Typ. ) (dB)
parameters Gain (dBi) 19.9 21.7
Horizontal 3dB beam width (°) 65 65
NR Broadcast beam
Front to back ratio (dB) Typ.26 Typ. 30
Side lobe suppression for first side lobe above main
16 15
beam (Typ. ) (dB)
0°direct beam gain (dBi) 20.2 22.0
0°direction beam horizontal 3dB beam width (°) 26 18
NR Service beam
0°direction beam front to back ratio (dB) Typ. 30 Typ. 30
0°direction beam cross polar ratio (0°) (dB) Typ. 18 Typ. 17
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 499 x 206
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 3 Issue: 2021-01-27