Professional Documents
Culture Documents
The
NSF / ANSI 61CERTIFIED High
Performance
Company
Design Exceeds AWWA
All Bray resilient seated
Performance Criteria butterfly Series 30
Bray resilient seated butterfly Single Source products are certified to
valves are designed, manufactured Responsibility NSF/ANSI Standard 61
and tested to meet or exceed As a manufacturer of electric and pneumatic
AWWA C504 performance criteria. actuators and accessories, Bray takes full for drinking water.
Pressure testing to ensure shell, responsibility for the operation of the valve/
seat and stem seal’s integrity actuator package. All Bray actuators direct-
is performed on every valve manu- mount to the valves without the need for
costly brackets, linkages and couplers. With ENDEN
factured by Bray Controls. this breadth of product and experience, EP
Bray Controls is the fastest growing
IND
T LY
Bray Controls has been successfully automated valve producer in the water
providing resilient seated valves for and wastewater industry.
over 25 years for many applications ER
D
E
C
As the leading supplier of automated TIFI
in the Water, Wastewater, Filtration
butterfly valves to the water filter and
and Desalination applications. Bray blower OEMs, Bray Controls is no stranger
valves have exceeded a million to water and wastewater treatment plants.
cycles in actual AWWA type services. Using state-of-the-art materials and design,
Bray’s industrial butterfly valves and
Bray’s peroxide-cured EPDM seats actuators have been successfully applied
exhibit outstanding performance in in the following applications: NSF 61
water services. Third party testing
of Bray EPDM per ASTM D6284 • Raw water • Fresh water
shows excellent compatibility with • Wastewater • Digester Gas
chlorine/chloramine additives. • Aeration • Chemical Treatment
• Reverse Osmosis
AWWA Bray
C504 Specification Resilient seated Valves
Service
Fresh and Waste Water, slur-
Fresh Water ries, acids, chemicals
>6 Ph Limits Wide Range
125 ºF Max Temperature Limits 250 ºF Max
16 feet/second Velocity Limits to 30 feet/second
AWWA Bray
C504 Specification Resilient seated Valves
Valve Design Elements
Fresh Water Fresh and Waste Water, slurries, acids, chemicals
High performance valves have been Bray Controls is proud to offer When compared to gate, globe, ball,
successfully installed in power plants, the Bray/McCannalok line of high diaphragm and plug valves, the Bray/
desalination plants and deep sea drilling performance butterfly valves. This McCannalok butterfly valve is significantly
projects. product line is recognized as a proven smaller and lighter weight, therefore
leader with over 30 years of successful installation space, time, and maintenance
service in process industries worldwide. costs are greatly reduced.
• Wafer and Lug Styles The Series 40’s unique, patented design
• ANSI, DIN and JIS flange received Chemical Processing’s Vaaler The Bray/McCannalok High
patterns available Award for Best Product shortly after it Performance Valve delivers the
was introduced. The simple, innovative highest quality and highest value
• ISO 5211 global standard design offers rugged reliability and available for your requirements.
• Approvals/Compliance extremely easy maintenance in the field.
UL/NSF 61- Potable water Independent and internal tests have proven DEAD–END SERVICE
Bray/McCannalok’s superior service Bray/McCannalok ANSI Class 150, 300
PED life capability, with bubble-tight shut-off and 600 valves with lug bodies are rated
ABS through over 100,000 cycles. for bidirectional dead-end service a the full
DNV
differential pressure rating.
The Series 40 valves can be automated
inexpensively with Bray’s pneumatic and
electric actuators.
The
High
Performance
Company
Actuators and Accessories
Series 92/93 Pneumatic Actuators
All double acting and spring return units are suitable for both
on-off and throttling applications. Actuators which can be
actuated with other media such as hydraulic oil or water are also
available as an option.
SERIES 6A ELECTRO-
PNEUMATIC POSITIONERS
Series 6A intelligent electro-
pneumatic positioners offer
precise, microprocessor driven
flow control and advanced
communication combined
with the lowest air
Bray’s Series 92/93 line of high performance and high quality consumption on the market.
pneumatic actuators combines styling, strength, compactness For use with either double or
single acting actuators.
and simplicitiy of design to produce the best rotary actuator in the
market today.
Engineering excellence and precision manufacturing have produced SERIES 52 VALVE STATUS MONITOR
a modular product line with reduced overall size requirements and The Bray 2N1 ProxSensor provides 2
economic savings. In addition all Brayline Accessories are fully modular proximity sensors in 1 self-contained,
and directly mount to the actuator – providing flexibility and efficiency fully sealed, compact enclosure. The
sensors are completely encapsulated
at reduced cost. with epoxy resin in a polymer
enclosure for superior moisture,
Bray Series 92/93 actuators are rack and pinion, opposed-piston chemical and corrosion protection. AC,
actuators available in two versions: double acting for rotation of 90°, DC, Intrinsically Safe and BUS Network
135° and 180°, and spring return for 90° rotation. Their ideal use is versions are offered.
actuating butterfly, ball or plug valves, but they can be applied anywhere
a rotation of 90°, 135° or 180° is needed.
ENCLOSURE
The Series 70 waterproof unit is UL NEMA 4,
4x listed. Die-cast aluminum cover and base
are high-quality polyester powder coated for
exceptional corrosion, wear, impact and ultra-
violet resistance.
RUGGED electric actuator FOR ROTARY VALVES - 300 to 18,000 lb-in Output torque
Bray Controls’ years of proven success in electric actuation, combined with innovative
engineering, has produced the Series 70. The Series 70 features on-off or modulating control. This
EXPLOSION PROOF ENCLOSURE
The Series 70 waterproof/explosion proof
red, round electric actuator for rotary valves delivers highly reliable service.
unit is UL NEMA 4,4x,7&9 listed and certified Bray’s unique, customer-friendly designed Control Center has many advantages over present
to specifications for hazardous locations. The industry standards including:
rugged, heavy duty housing contains precision
machined bores and flanges to meet flame path
requirements. Waterproof / explosion proof models • UL, CSA and CE certification of most units
are currently available with 800 to 2,000 lb.-in. • Ease of customer field wiring directly to the terminal strip
output torque, continuous or intermittent duty. without interference from other components
• Simple and unique manual override handwheel system
• Lowest profile and lightest weight actuator on the market
• Simple finger or screw driver adjustment of travel limit cams
without interference from other components
• Highly visible valve status display
• Externally adjustable travel stops
• Captive housing screws
Additionally, components not requiring customer access are protected underneath the Power
Center cover plate.
SERVO PRO OPERATION
TORQUE LIMITING
The Servo Pro can be configured by the factory or the customer
SWITCHING SYSTEM (Optional)
MECHANICAL TRAVEL STOPS Stainless to accept several types of input signals, such as 4-20 mADC,
The torque limiting switching system
Steel mechanical travel stops permit precise field 0-10 VDC, 0-5 VDC or potentiometer control. Each terminal
consists of two SPDT mechanical
adjustment of actuator movement to specific connection and indicator is clearly labeled to
switches and two factory calibrated
degrees of rotation. The travel stops are located simplify field wiring and operation.
adjusting set screws. The upper cam
outside the base for easy readjustment without adjusts the torque limit in the open
removing the cover. Stainless Steel lock nuts with direction, and the lower cam adjusts
O-ring seals hold the travel stops securely in place. the torque limit in the closed direction.
The travel stops are normally set at the factory to
allow 0° and 90° travel.
Bray China
Flow-Tek - Houston, Texas
Bray Continental Europe
German Factory
POLAND
RitePro, Canada Bray Brazil
Bray Poland
Ultra-Flow
Bray Pacific
Australia Factory
DISTRIBUTOR
COnTrOLS
use only. Consult Bray representatives or factory
for the specific requirements and material selection
for your intended application. The right to change
or modify product design or product without prior A Division of BrAy InTErnATIOnAL, Inc.
notice is reserved. 13333 Westland East Blvd. Houston, Texas 77041
United States patent number 5,152,501.
281.894.5454 FAX 281.894.9499 www.bray.com
Other patents issued and applied for worldwide.
Bray® is a registered trademark of Bray International, Inc. © 2009 Bray International. All rights reserved. B-1045_EL_AWWA_2009/02