Professional Documents
Culture Documents
q AS 100 q PL, q GR, q PG, q Other q AS 100EH q PL, q GR, q PG, q Other
9" 1"
16 x 1 8 Dia. Holes
(14.3 x 28.6)
1 5"
8 1 5"
8
(41.3) (41.3)
7"
(11.1)
2"
16 (50.8)
q AS 100KO q PL, q GR, q PG, q Other q AS 100H q PL, q GR, q PG, q Other
9"
7" 16 Dia. Holes
8 Dia. Knockouts (14.3)
(22.2)
1 5" 1 5"
8
8 (41.3)
(41.3)
13"
32 x 3 Slot
(10.32 x 76.2)
1 5"
8
(41.3)
1"
2 4"
(12.7) (101.6)
LEGEND:
GR: Powder Coated Supr-Green EG: Electro-Galvanized PG: Pre-Galvanized AL: Aluminum HG: Hot Dipped Galvanized PL: Plain SS: Stainless Steel ZTC: Zinc Trivalent Chromium
Stainless Steel (SS), Zinc Trivalent Chromium (ZTC) and Hot Dipped Galvanized (HG) are specialty finishes. Pricing is located in the Specialty Strut Section of the Anvil-Strut price book.
1.762
(44.8)
Y
PROPERTIES OF SECTION
AS 100 3.13 4.7 0.887 5.723 1.100 45.785 0.633 10.373 1.114 2.830 0.431 17.940 0.530 8.685 0.697 1.770
I = Moment of Inertia S = Section Modulus r = Radius of Gyration
AS-1.15
CHANNEL
BEAM & COLUMN LOADS - METRIC
Static Beam Load (X-X Axis) Column Loading Data
Span Max.
or Max Uniform Load at Deflection Allowable Max. Column Load Applied at C.G.
Deflection
Unbraced Allowable at Uniform Load at
Height Uniform Span/180 Span/240 Span/360 Weight of Slot Face
Load k=.65 k=.80 k=1.0 k=1.2
Load Deflection Deflection Deflection Channel
mm Kn mm Kn Kn Kn Kg Kn Kn Kn Kn Kn
305 47.2 0.3 47.2 47.2 47.2 1.4 27.4 87.2 84.8 81.0 76.7
457 31.4 0.5 31.4 31.4 31.4 2.1 26.5 81.5 76.7 69.5 61.9
610 23.6 0.8 23.6 23.6 23.6 2.9 25.1 74.4 67.0 56.8 47.0
762 18.9 1.3 18.9 18.9 18.9 3.5 23.4 66.4 56.8 44.6 34.0
914 15.7 1.8 15.7 15.7 15.7 4.3 21.5 58.1 47.0 34.0 25.1
1,067 13.5 2.3 13.5 13.5 13.5 5.0 19.4 50.0 38.1 26.3 19.8
1,219 11.8 3.0 11.8 11.8 11.8 5.7 17.2 42.4 30.5 21.3 16.3
1,524 9.4 4.6 9.4 9.4 8.5 7.1 13.8 29.7 21.3 15.3 12.1
1,829 7.9 6.6 7.9 7.9 6.0 8.5 11.4 22.2 16.3 12.1 9.7
2,134 6.8 9.1 6.8 6.5 4.4 9.9 9.8 17.6 13.2 10.0 8.1
2,438 5.9 11.9 5.9 5.0 3.3 11.3 8.6 14.5 11.1 8.5 7.0
2,743 5.2 15.2 5.2 4.0 2.6 12.8 7.7 12.5 9.7 7.5 6.2
3,048 4.7 18.8 4.3 3.2 2.1 14.2 6.9 10.9 8.5 6.7 **
3,658 3.9 26.9 3.0 2.2 1.5 17.1 5.9 8.8 7.0 ** **
4,267 3.4 36.6 2.2 1.6 1.1 19.9 5.1 7.4 6.0 ** **
4,572 3.2 41.9 1.9 1.4 0.9 21.3 ** 6.9 ** ** **
4,877 2.9 47.8 1.7 1.2 0.8 22.7 ** 6.4 ** ** **
5,486 2.6 60.5 1.3 1.0 0.7 25.5 ** ** ** ** **
6,096 2.4 74.7 1.1 0.8 0.5 28.4 ** ** ** ** **
CHANNEL SPECIFICATIONS
Materials HOT DIP GALVANIZED - POST FABRICATION
The finished channel is completely immersed in a bath of molten
CARBON STEEL zinc, resulting in the complete coating of all surfaces of the
Channels are formed from high-quality, structural grade carbon steel product, including edges and welds. Strut channels that are hot
which has been manufactured in a ccordance with ASTM A-1011-04- dip galvanized, have a total coating weight of 3.0 ounces of zinc
SS Grade 33 (hot rolled), or ASTM 366 (cold rolled), with mechanical per square foot in accordance with ASTM A-123 specification.
properties of 33 ksi minimum yield and 52 ksi minimum tensile strength. This coating provides superior results in applications calling for
The precision roll-forming process by which the channels are formed prolonged outdoor exposure.
“cold works" the steel, thereby increasing its mechanical properties.
SUPR-GREEN POWDER COATING
STAINLESS STEEL Strut channels are coated after fabrication with polyester powder
Channels are formed from chromium-nickel stainless steel sheet finish. This coating is applied using an electrostatic spray process,
manufactured in accordance with ASTM A-240 specification, offered beginning with cleaning and phosphating, through a bonderite
in both AISI Type 304 and 316 material to provide protection in pretreatment process, and ending with oven curing. The resulting
varying corrosive conditions. finish provides a high quality appearance and durability. Powder
Coating is in accordance with ASTM B-117 (standard practice for
ALUMINUM operating salt spray (fog) apparatus) to 500 hours with less than 1⁄8"
Extruded aluminum channel is produced from 6063-T6 alloy, and scribe creep.
fittings are produced from 5052-H32 alloy, both in accordance with
ASTM B-221 specifications. Aluminum is suitable for use in various ZINC TRIVALENT CHROMIUM
corrosive environments. The finished channel undergoes a multi-step process consisting of
electrogalvanizing, in accordance with ASTM B-633-85, followed
by an application of zinc trivalent chromium, which provides the
Finishes distinctive gold c
oloration of the finish. All surfaces are coated
because the process is performed after fabrication.
PRE-GALVANIZED
Hot dip, mill galvanized coating produced through a process of PVC
continuously passing the steel through a bath of molten zinc. A corrosive resistant PVC (polyvinyl chloride) coating is applied
This process is performed in accordance with ASTM A-653. The over the completed strut channel. The c oating process consists of
thickness of the zinc coating conforms with ASTM G-90 which surface pretreatment, followed by preheating of the part, which is
represents a coating thickness of .90 ounces of zinc per square then passed through a fl
uidized bed of vinyl plastic powder. The
foot. This coating is applied to the steel master coils prior to slitting powder melts onto the heated channel forming a smooth coating
and fabrication. which undergoes a final heat curing.
AS-1.15
PIPE & CONDUIT SUPPORTS
q AS 1100AS q EG, q SS, q ZTC
RIGID CONDUIT CLAMP
PULLOUT
SLIP ALONG
(Transverse)
SLIP THRU
(Longitudinal)
LEGEND:
GR: Powder Coated Supr-Green EG: Electro-Galvanized PG: Pre-Galvanized AL: Aluminum HG: Hot Dipped Galvanized PL: Plain SS: Stainless Steel ZTC: Zinc Trivalent Chromium
Stainless Steel (SS), Zinc Trivalent Chromium (ZTC) and Hot Dipped Galvanized (HG) are specialty finishes. Pricing is located in the Specialty Strut Section of the Anvil-Strut price book.
9"
16 x 1 81" Dia. Holes 1 85" X
7"
8
0.923
1 5"
8 Y
7"
16 2"
Specifications
GENERAL MATERIAL
H-STRUT channels are manufactured by a series of H-STRUT channels are produced from prime structural
forming dies, or rolls, which progressively cold work steel covered by the following specifications.
the strip steel into the desired channel configuration. This (See technical section for additional information)
method produces a cross section of uniform dimensions ❏ Pre-Galvanized Steel . . . . . . . . . . . ASTM A-653
within a tolerance of plus or minus 0.015", on outside ❏ Plain Steel. . . . . . . . . . . . . . . . . . . . ASTM A-1011-04-SS
dimensions. ❏ Aluminum (Type 6063T6) . . . . . . . . ASTM B-221
❏ Stainless Steel (Type 304 & 316). . ASTM A-240
LENGTH INFORMATION Other materials and specifications available on request.
H-STRUT Channels are produced and stocked in 10' and
20' lengths with a tolerance of ± 1⁄8". FINISHES
Other lengths are available upon request. All H-STRUT channels are stocked in pre-galvanized and
powder coated Supr-Green. Some sizes are stocked in
LOADING DATA zinc trivalent chromium, PVC or hot dipped galvanized.
1. When calculating load at center of span, multiply load ❏ Hot Dipped Galvanized. . . . . . . .ASTM A-123
from table by 0.5 and deflection by 0.8. ❏ Zinc Trivalent Chromium. . . . . . . ASTM B-633-85
2. When calculating beam and column loads for ❏ Powder Coated Supr-Green. . . . ASTM B-117
aluminum, multiply by 33%. ❏ PVC Coating 40 ML Thickness - Available Upon Request
Submittal Sheets
H-132-OS Page 2 of 2
Notes 4. Refer to the latest Haydon Engineering Catalog in our Literature Section for reduction
factors for unbraced lengths or call us 1-800-2-HAYDON.
1. The beam capacities shown above include the weight of the strut beam. The beam
weight must be subtracted from these capacities to arrive at the net beam capacity.
2. Allowable beam loads are based on a uniformly loaded, simply supported beam. For
capacities of a beam loaded at midspan at a single point, multiply the beam capacity by
50% and deflection by 80%.
Project Information
Project: Notes:
Address:
Contractor:
Engineer: Date:
Approval
❏ Approved Signature: Remarks:
❏ Approved as Noted
❏ Not Approved
Submittal Sheets
H-132 Page 1 of 2
1 85" X
7"
8
0.923
Specifications
GENERAL MATERIAL
H-STRUT channels are manufactured by a series of H-STRUT channels are produced from prime structural
forming dies, or rolls, which progressively cold work steel covered by the following specifications.
the strip steel into the desired channel configuration. This (See technical section for additional information)
method produces a cross section of uniform dimensions ❏ Pre-Galvanized Steel . . . . . . . . . . . ASTM A-653
within a tolerance of plus or minus 0.015", on outside ❏ Plain Steel. . . . . . . . . . . . . . . . . . . . ASTM A-1011-04-SS
dimensions. ❏ Aluminum (Type 6063T6) . . . . . . . . ASTM B-221
❏ Stainless Steel (Type 304 & 316). . ASTM A-240
LENGTH INFORMATION Other materials and specifications available on request.
H-STRUT Channels are produced and stocked in 10' and
20' lengths with a tolerance of ± 1⁄8". FINISHES
Other lengths are available upon request. All H-STRUT channels are stocked in pre-galvanized and
powder coated Supr-Green. Some sizes are stocked in
LOADING DATA zinc trivalent chromium, PVC or hot dipped galvanized.
1. When calculating load at center of span, multiply load ❏ Hot Dipped Galvanized. . . . . . . .ASTM A-123
from table by 0.5 and deflection by 0.8. ❏ Zinc Trivalent Chromium. . . . . . . ASTM B-633-85
2. When calculating beam and column loads for ❏ Powder Coated Supr-Green. . . . ASTM B-117
aluminum, multiply by 33%. ❏ PVC Coating 40 ML Thickness - Available Upon Request
Submittal Sheets
H-132 Page 2 of 2
SECTION PROPERTIES
1 85" X
Area of X-X Axis Y-Y Axis 7"
Catalog Wt./Ft. 8
Section 0.923
No. Lbs. I in4 S in3 r in. l in4 S in3 r in.
Sq. In.
H-132 1.94 0.552 0.188 0.208 0.584 0.236 0.290 0.654 Y
I = Moment of Inertia S = Section Modulus r = Radius of Gyration
Project Information
Project: Notes:
Address:
Contractor:
Engineer: Date:
Approval
❏ Approved Signature: Remarks:
❏ Approved as Noted
❏ Not Approved
Submittal Sheets
H-162-OS Page 1 of 2
13
⁄ 16" X 15⁄ 8"
12 Gauge Channel
wt./100 ft. - 130#
Stocked in pre-galvanized, plain & powder coated 1 85"
Supr-Green, in both 10 & 20 ft. lengths. Note: Also 3"
available in Stainless Steel 304 & 316 Alloys. Other 8
9"
materials, finishes & lengths are available upon 13"
32
X
request. 16
Y
9"
16 x 1 81" Dia. Holes 0.492
7"
8
1 5"
8
7"
16 2"
Specifications
GENERAL MATERIAL
H-STRUT channels are manufactured by a series of H-STRUT channels are produced from prime structural
forming dies, or rolls, which progressively cold work steel covered by the following specifications.
the strip steel into the desired channel configuration. This (See technical section for additional information)
method produces a cross section of uniform dimensions ❏ Pre-Galvanized Steel . . . . . . . . . . . ASTM A-653
within a tolerance of plus or minus 0.015", on outside ❏ Plain Steel. . . . . . . . . . . . . . . . . . . . ASTM A-1011-04-SS
dimensions. ❏ Aluminum (Type 6063T6) . . . . . . . . ASTM B-221
❏ Stainless Steel (Type 304 & 316). . ASTM A-240
LENGTH INFORMATION Other materials and specifications available on request.
H-STRUT Channels are produced and stocked in 10' and
20' lengths with a tolerance of ± 1⁄8". FINISHES
Other lengths are available upon request. All H-STRUT channels are stocked in pre-galvanized and
powder coated Supr-Green. Some sizes are stocked in
LOADING DATA zinc trivalent chromium, PVC or hot dipped galvanized.
1. When calculating load at center of span, multiply load ❏ Hot Dipped Galvanized. . . . . . . .ASTM A-123
from table by 0.5 and deflection by 0.8. ❏ Zinc Trivalent Chromium. . . . . . . ASTM B-633-85
2. When calculating beam and column loads for ❏ Powder Coated Supr-Green. . . . ASTM B-117
aluminum, multiply by 33%. ❏ PVC Coating 40 ML Thickness - Available Upon Request
Submittal Sheets
H-162-OS Page 2 of 2
13
⁄ 16" X 15⁄ 8"
12 Gauge Channel
wt./100 ft. - 130# (Cont.) 1 85"
SECTION PROPERTIES 3"
8
9"
Area of X-X Axis Y-Y Axis 32
13"
Catalog Wt./Ft. X
Section 16
No. Lbs. I in 4 3
S in r in. l in4
S in 3
r in.
Sq. In.
Y
H-162-OS 1.30 0.384 0.032 0.067 0.289 0.139 0.171 0.602 0.492
7"
I = Moment of Inertia S = Section Modulus r = Radius of Gyration 8
Notes 4. Refer to the latest Haydon Engineering Catalog in our Literature Section for reduction
factors for unbraced lengths or call us 1-800-2-HAYDON.
1. The beam capacities shown above include the weight of the strut beam. The beam
weight must be subtracted from these capacities to arrive at the net beam capacity.
2. Allowable beam loads are based on a uniformly loaded, simply supported beam. For
capacities of a beam loaded at midspan at a single point, multiply the beam capacity by
50% and deflection by 80%.
Project Information
Project: Notes:
Address:
Contractor:
Engineer: Date:
Approval
❏ Approved Signature: Remarks:
❏ Approved as Noted
❏ Not Approved
Submittal Sheets
H-162 Page 1 of 2
13
⁄ 16" X 15⁄ 8"
12 Gauge Channel
wt./100 ft. - 135#
Stocked in pre-galvanized, plain & powder coated Supr-
Green, in both 10 & 20 ft. lengths. Note: Also available
in Stainless Steel 304 & 316 Alloys. Other materials, 1 85"
finishes & lengths are available upon request. 3"
8
9"
32
13"
16 X
Y
0.492
7"
8
Specifications
GENERAL MATERIAL
H-STRUT channels are manufactured by a series of H-STRUT channels are produced from prime structural
forming dies, or rolls, which progressively cold work steel covered by the following specifications.
the strip steel into the desired channel configuration. This (See technical section for additional information)
method produces a cross section of uniform dimensions ❏ Pre-Galvanized Steel . . . . . . . . . . . ASTM A-653
within a tolerance of plus or minus 0.015", on outside ❏ Plain Steel. . . . . . . . . . . . . . . . . . . . ASTM A-1011-04-SS
dimensions. ❏ Aluminum (Type 6063T6) . . . . . . . . ASTM B-221
❏ Stainless Steel (Type 304 & 316). . ASTM A-240
LENGTH INFORMATION Other materials and specifications available on request.
H-STRUT Channels are produced and stocked in 10' and
20' lengths with a tolerance of ± 1⁄8". FINISHES
Other lengths are available upon request. All H-STRUT channels are stocked in pre-galvanized and
powder coated Supr-Green. Some sizes are stocked in
LOADING DATA zinc trivalent chromium, PVC or hot dipped galvanized.
1. When calculating load at center of span, multiply load ❏ Hot Dipped Galvanized. . . . . . . .ASTM A-123
from table by 0.5 and deflection by 0.8. ❏ Zinc Trivalent Chromium. . . . . . . ASTM B-633-85
2. When calculating beam and column loads for ❏ Powder Coated Supr-Green. . . . ASTM B-117
aluminum, multiply by 33%. ❏ PVC Coating 40 ML Thickness - Available Upon Request
Submittal Sheets
H-162 Page 2 of 2
13
⁄ 16" X 15⁄ 8"
12 Gauge Channel
wt./100 ft. - 135# (Cont.) 1 85"
3"
SECTION PROPERTIES 9"
8
32
13"
Area of X-X Axis Y-Y Axis X
Catalog Wt./Ft. 16
Section
No. Lbs. I in 4
S in3
r in. l in 4
S in 3
r in.
Sq. In. Y
0.492
H-162 1.37 0.384 0.032 0.067 0.289 0.139 0.171 0.602 7"
8
I = Moment of Inertia S = Section Modulus r = Radius of Gyration
Project Information
Project: Notes:
Address:
Contractor:
Engineer: Date:
Approval
❏ Approved Signature: Remarks:
❏ Approved as Noted
❏ Not Approved
Hardware
Standard finish is Zinc Electroplate (EG) • Product finishes and materials is on page 4.
SW12 SW13
Swivel Female – Female Swivel Male – Female
RS
TH
1"
RS L
RS
RC
Rod Coupling
RS
Catalog L
RS Hex Size Wt. lbs
Number in mm
1 7 3
RC0025EG ⁄ 4"–20 ⁄8 22.2 ⁄ 8" .03
3
RC0037EG ⁄ 8"–16 1 3⁄ 4 44.4 9
⁄ 16" .08
1
RC0050EG ⁄ 2"-13 1 3⁄ 4 44.4 11
⁄ 16" .12
General
CNN CNS CNR
Info
Channel Nut No Spring Channel Nut Short Spring Channel Nut Regular Spring
For all channel sizes except as noted For 13⁄16" & 1" channel For 13⁄8" & 15⁄8" channel
Channel
Nuts
TH
TH TH
Hardware
T
T
T
Clamps
Strut
Catalog Thread T Wt. Catalog Thread T Wt. Catalog Thread T Wt.
Number Size in mm lbs Number Size in mm lbs Number Size in mm lbs
CNN20010EG 10-24 0.25 6.3 0.096 CNS20010EG 10-24 0.25 6.3 0.060 CNR20010EG 10-24 0.25 6.3 0.066
Clamps
5 5 5
CNN30031EG ⁄ 16"–18 0.37 9.4 0.096 CNS20031EG ⁄ 16"–18 0.25 6.3 0.068 CNR20031EG ⁄ 16"–18 0.25 6.3 0.072
3 5 5
CNN30037EG ⁄ 8"–16 0.37 9.4 0.084 CNS30031EG ⁄ 16"–18 0.37 9.4 0.092 CNR30031EG ⁄ 16"–18 0.37 9.4 0.0925
1 3 3
CNN30050EG ⁄ 2"–13 0.37 9.4 0.076 CNS20037EG ⁄ 8"–16 0.25 6.3 0.06 CNR20037EG ⁄ 8"–16 0.25 6.3 0.066
1 3 3
*CNN40050EG ⁄ 2"–13 0.50 12.7 0.108 CNS30037EG ⁄ 8"–16 0.37 9.4 0.088 CNR30037EG ⁄ 8"–16 0.37 9.4 0.093
Fittings
5 1 1
Flat
CNN30062EG ⁄ 8"–11 0.37 9.4 0.097 CNS30050EG ⁄ 2"–13 0.37 9.4 0.087 CNR30050EG ⁄ 2"–13 0.37 9.4 0.084
5 5 1
*CNN40062EG ⁄ 8"–11 0.50 12.7 0.130 CNS30062EG ⁄ 8"–11 0.37 9.4 0.104 CNR40050EG ⁄ 2"–13 0.50 12.7 0.108
3 5
CNN30075EG ⁄ 4"–10 0.37 9.4 0.103 CNR40062EG ⁄ 8"–11 0.50 12.7 0.162
Fittings
Angle
3 3
*CNN40075EG ⁄ 4"–10 0.50 12.7 0.127 CNR40075EG ⁄ 4"–10 0.50 12.7 0.137
7 7
*CNN40087EG ⁄ 8"–9 0.50 12.7 0.125 CNR40087EG ⁄ 8"–9 0.50 12.7 0.114
Clamps
13
*Cannot be used with ⁄16" & 1" channel
Beam
CNL CNT CND
Brackets
Channel Nut Long Spring TH Channel Nut Top Spring Channel Stud Nut Regular Spring
For 27⁄16" & 31⁄4" channel For all channel sizes except as noted For 13⁄8" & 15⁄8" channel
T
Concrete Inserts
& Electrical
TH TH
Bases
Post
Catalog Thread T Wt. Number Size in mm lbs
Number Size in mm lbs CNT20025EG
1
⁄ 4"–20 0.25 6.3 0.093
Rollers
1
CNL20025EG ⁄ 4"–20 0.25 6.3 0.10 CNT30037EG
3
⁄ 8"–16 0.37 9.4 0.093
CNL30037EG
3
⁄ 8"–16 0.37 9.4 0.10 CNT30050EG
1
⁄ 2"–13 0.37 9.4 0.092 Catalog Thread Stud Length Wt.
CNL40050EG
1
⁄ 2"–13 0.50 12.7 0.11 *CNT40050EG
1
⁄ 2"–13 0.50 12.7 0.101 Number Size in mm lbs
CND25100EG
1
⁄ 4"–20 1" 25.4 0.08 U-Fittings
*Cannot be used with 13⁄16" & 1" channel
1
CND25137EG ⁄ 4"–20 1 3⁄ 8" 34.9 0.09
CNSQ TH
CNC CND25150EG
1
⁄ 4"–20 11⁄ 2" 38.1 0.09
Fittings
3
CND37100EG ⁄ 8"–16 1" 25.4 0.13
For all channel sizes For all channel sizes CND37112EG
3
⁄ 8"–16 11⁄ 8" 28.6 0.13
except as noted T except as noted T CND37125EG
3
⁄ 8"–16 11⁄ 4" 31.8 0.14
Z-Fittings
3
CND37150EG ⁄ 8"–16 11⁄ 2" 38.1 0.15
3
CND37162EG ⁄ 8"–16 1 5⁄ 8" 41.3 0.16
3
Catalog Thread T Wt. Catalog Thread T Wt. CND37212EG ⁄ 8"–16 2 1⁄ 8" 54.0 0.16
Technical
Data
1
Number Size in mm lbs Number Size in mm lbs CND50100EG ⁄ 2"–13 1" 25.4 0.14
1
CNSQ2025EG
1
⁄ 4"–20 0.37 9.4 0.093 CNC30025EG
1
⁄ 4"–20 0.37 9.4 0.093 CND50125EG ⁄ 2"–13 11⁄ 4 31.8 0.15
1
CNSQ3037EG
3
⁄ 8"–16 0.37 9.4 0.093 CNC30037EG
3
⁄ 8"–16 0.37 9.4 0.093 CND50150EG ⁄ 2"–13 11⁄ 2" 38.1 0.17
Index
1
CNSQ3050EG
1
⁄ 2"–13 0.37 9.4 0.092 CNC30050EG
1
⁄ 2"–13 0.37 9.4 0.092 CND50200EG ⁄ 2"–13 2" 50.8 0.19
ENGINEERING CATALOG www.jetstr.com Page [11]
Domestic Channel Nuts
Standard finish is Zinc Electroplate (EG) • Product finishes and materials is on page 4.
TH
TH TH
T
T T
TH
T
TH
PROJECT:
SPECIFIED ITEM:
P R O D U C T S U B M I T TA L / S U B S T I T U T I O N R E Q U E S T E D :
Power-Stud+ SD1 Anchors in Cracked and Uncracked Concrete by Powers Fasteners, Inc.
Code listed as given in ICC-ES ESR-2818 (www.powers.com)
Calculations can be checked using Powers Design Assist (PDA) software for ACI 318 App. D
The attached submittal package includes the product description, specifications, drawings, and performance data for use in the evaluation
of the request.
S U B M I T T E D B Y:
Name: Signature:
Company:
Address:
By: Date:
Remarks:
HLKW
Finishes:
Prod
Electrogalvanized (EG): uct W
Conforms to ASTM B633, eight
Type III SC1 / Piec
Unistrut Defender (DF): Part Threa e (lbs
Conforms to ASTM A1059 No. d Size Finish )
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - HLKW02
- - - - - - - - - -1/4"
- - - - - - - -EG
- - - - - - -0.003
--------------------
Materials & Finishes - Special 5
Metals:
HLKW02 1/4" DF 0.003
5
Stainless Steel, Type 316
(SS): ASTM A240, Type 316 * HLKW03 5/16" EG 0.004
1
* These materials have
HLKW03 3/8" EG 0.006
different physical properties
and performance 7
characteristics. HLKW03 3/8" DF 0.006
Please contact us for design 7
support.
HLKW05 1/2" EG 0.013
0
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
HHXN
Finishes:
Prod
Electrogalvanized (EG): uct W
Conforms to ASTM B633, eight
Type III SC1 / Piec
Unistrut Defender (DF): Part Threa e (lbs
Conforms to ASTM A1059 No. d Size Finish )
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -HHXN02
- - - - - - - - -1/4"
- - - - - - - -EG
- - - - - - -0.006
--------------------
Materials & Finishes - Special 5
Metals:
HHXN02 1/4" DF 0.006
5
Stainless Steel, Type 316
(SS): ASTM A240, Type 316 * HHXN03 5/16" EG 0.012
1
* These materials have
HHXN03 3/8" EG 0.016
different physical properties
and performance 7
characteristics. HHXN03 3/8" DF 0.016
Please contact us for design 7
support.
HHXN05 1/2" EG 0.048
0
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
HHCS
Materials:
Pro
Screws conform to SAE duc
J429 GR 2 (exceeds ASTM tW
A307). eig
Thr ht /
Finishes: Par ead Len Pie
tN Siz gth Fini ce (
Electrogalvanized (EG): o. e (ft) sh lbs)
Conforms to ASTM B633,
Type III SC1 HHCS 1/4" 7/16" EG 0.01
Unistrut Defender (DF): 02504
Conforms to ASTM A1059 4
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -HHCS
- - - - - - -1/4"
- - - - - -3/4"
- - - - - - EG
- - - - - -0.013
-------------------
Materials & Finishes - Special 02507
Metals: 5
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
HFMS
Materials:
Pro
Screws conform to SAE duc
J429 GR 2 (exceeds ASTM tW
A307). eig
Thr ht /
Finishes: Par ead Len Pie
tN Siz gth Fini ce (
Electrogalvanized (EG): o. e (ft) sh lbs)
Conforms to ASTM B633,
Type III SC1 HFMS 1/4" 5/8" EG 0.012
Unistrut Defender (DF): 02506
Conforms to ASTM A1059 2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -HFMS
- - - - - - 5/16"
- - - - - - - -1"- - - - - EG
- - - - - -0.026
-------------------
Materials & Finishes - Special 031100
Metals: HFMS 1/2" 1" EG 0.093
05010
Stainless Steel, Type 316 0
(SS): ASTM A240, Type 316 *
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
HFLW
Finishes:
Prod
Electrogalvanized (EG): uct W
Conforms to ASTM B633, eight
Type III SC1 / Piec
Unistrut Defender (DF): Part Threa e (lbs
Conforms to ASTM A1059 No. d Size Finish )
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -HFLW02
- - - - - - - - -1/4"
- - - - - - - -EG
- - - - - - -0.008
--------------------
Materials & Finishes - Special 5
Metals:
HFLW02 1/4" DF 0.008
5
Stainless Steel, Type 316
(SS): ASTM A240, Type 316 * HFLW03 5/16" EG 0.01
1
* These materials have
HFLW03 3/8" EG 0.015
different physical properties
and performance 7
characteristics. HFLW03 3/8" DF 0.015
Please contact us for design 7
support.
HFLW 0 5 1/2" EG 0.035
0
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
HCSS
Materials:
Pro
Screws conform to SAE duc
J429 GR 2 (exceeds ASTM tW
A307). eig
Thr ht /
Finishes: Par ead Len Pie
tN Siz gth Fini ce (
Electrogalvanized (EG): o. e (ft) sh lbs)
Conforms to ASTM B633,
Type III SC1 HCSS 1/4" 1" EG 0.028
Unistrut Defender (DF): 02510
Conforms to ASTM A1059 0
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -HCSS
- - - - - - 5/16"
- - - - - -1-1/2"
- - - - - - - EG
- - - - - -0.039
-------------------
Materials & Finishes - Special 031150
Metals: HCSS 3/8" 1-1/2" EG 0.045
03715
Stainless Steel, Type 316 0
(SS): ASTM A240, Type 316 *
HCSS 3/8" 2" EG 0.061
* These materials have 03720
different physical properties 0
and performance HCSS 1/2" 1-1/2" EG 0.085
characteristics. 05015
Please contact us for design 0
support.
HCSS 1/2" 2" EG 0.114
05020
0
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
P3016
Materials:
Prod
Unistrut Channel Nuts are uct W
manufactured from mild eight
steel cold rolled coil, and / Piec
after stamping and Part Threa e (lbs
machining operations are No. d Size Finish )
completed, they are case
hardened, assuring positive P3016-0 #6-32 EG 0.02
biting action into the 632
inturned edge of the
P3016-0 #8-32 EG 0.02
Unistrut Channel.
1 832
/ 4" & 5 / 16" Sizes: Conforms
to ASTM A1011 SS GR 33 P3016-1 #10-24 EG 0.04
3
/ 8", 7 / 16" & 1 / 2" Sizes: 024
Conforms to ASTM A576 GR
P3016-14 1/4"-20 EG 0.04
1015 Modified
5
/ 8", 3 / 4" & 7 / 8"Sizes: 20
Conforms to ASTM A36 or
A675 GR 60
Finishes:
Electrogalvanized (EG):
Conforms to ASTM B633,
Type III SC3
Unistrut Defender (DF):
Conforms to ASTM A1059
Hot Dip Galvanized (HG):
Conforms to ASTM A153
---------------------------------------------------------------------------------
Materials & Finishes - Special
Metals:
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
P4012 thru P4023
Materials:
Prod
Unistrut Channel Nuts are uct W
manufactured from mild eight
steel cold rolled coil, and / Piec
after stamping and Part Threa e (lbs
machining operations are No. d Size Finish )
completed, they are case
hardened, assuring positive P4012 5/8"-11 EG 0.1
biting action into the
P4012M1 M16 EG 0.11
inturned edge of the
6
Unistrut Channel.
1
/ 4" & 5 / 16" Sizes: Conforms P4023 3/4"-10 EG 0.1
to ASTM A1011 SS GR 33
3 P4023 3/4"-10 SS 0.11
/ 8", 7 / 16" & 1 / 2" Sizes:
Conforms to ASTM A576 GR
1015 Modified
5
/ 8", 3 / 4" & 7 / 8"Sizes:
Conforms to ASTM A36 or
A675 GR 60
Finishes:
Electrogalvanized (EG):
Conforms to ASTM B633,
Type III SC3
Unistrut Defender (DF):
Conforms to ASTM A1059
Hot Dip Galvanized (HG):
Conforms to ASTM A153
---------------------------------------------------------------------------------
Materials & Finishes - Special
Metals:
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
P4908
Materials &
Finishes - Standard: Prod
uct W
Base Metal: Steel conforms eight
to ASTM A1011 SS GR 33, / Piec
A1011 HSLAS GR 45, A36, Part Threa e (lbs
A575, A576, or A635. No. d Size Finish )
Electrogalvanized (EG):
Conforms to ASTM B633, P4908 3/8"-16 EG 0.18
Type III SC1
Unistrut Defender (DF):
Conforms to ASTM A1059
Hot Dip Galvanized (HG):
Conforms to ASTM A123 or
A153
Perma-Green (GR):
Conforms to commercial
standards for powder
coating
Perma-Gold (ZD):
Conforms to ASTM B633,
Type II SC1
Plain (PL): No finish
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
P3006 thru P3013
Materials:
Pro
Unistrut Channel Nuts are duc
manufactured from mild tW
steel cold rolled coil, and eig
after stamping and Thr ht /
machining operations are Par Use ead Pie
completed, they are case tN Wit Siz Fini ce (
hardened, assuring positive o. h e sh lbs)
biting action into the
inturned edge of the P3006 Any C # 8 - 3 2 EG 0.06
Unistrut Channel. -0832 hannel
1
/ 4" & 5 / 16" Sizes: Conforms
P3006 Any C #10-2 EG 0.06
to ASTM A1011 SS GR 33
3
/ 8", 7 / 16" & 1 / 2" Sizes: -1024 hannel 4
Conforms to ASTM A576 GR P3006 Any C 1/4"-2 EG 0.06
1015 Modified -1420 hannel 0
5
/ 8", 3 / 4" & 7 / 8"Sizes:
Conforms to ASTM A36 or P3006 Any C 1/4"-2 DF 0.07
A675 GR 60 -1420 hannel 0
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
P1012 thru P1024
Materials:
Prod
Unistrut Channel Nuts are uct W
manufactured from mild eight
steel cold rolled coil, and / Piec
after stamping and Part Threa e (lbs
machining operations are No. d Size Finish )
completed, they are case
hardened, assuring positive P1012 5/8"-11 EG 0.2
biting action into the
P1012 5/8"-11 SS 0.21
inturned edge of the
Unistrut Channel. P1023 3/4"-10 EG 0.2
1
/ 4" & 5 / 16" Sizes: Conforms
P1024 7/8"-9 EG 0.2
to ASTM A1011 SS GR 33
3
/ 8", 7 / 16" & 1 / 2" Sizes:
Conforms to ASTM A576 GR
1015 Modified
5
/ 8", 3 / 4" & 7 / 8"Sizes:
Conforms to ASTM A36 or
A675 GR 60
Finishes:
Electrogalvanized (EG):
Conforms to ASTM B633,
Type III SC3
Unistrut Defender (DF):
Conforms to ASTM A1059
Hot Dip Galvanized (HG):
Conforms to ASTM A153
---------------------------------------------------------------------------------
Materials & Finishes - Special
Metals:
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
P2485
Finishes:
Product
Electrogalvanized (EG): Weight /
Conforms to ASTM B633, Piece (lb
Type III SC1 Part No. Finish s)
P2485 EG 0.03
P2485 SS 0.03
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
P2486
Finishes:
Prod
Electrogalvanized (EG): uct W
Conforms to ASTM B633, eight
Type III SC1 / Piec
Part Rod S e (lbs
No. ize Finish )
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
P2485K
P2485K EG 0.03
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
K1062 thru K1064
Finishes:
Pro
Electrogalvanized (EG): duc
Conforms to ASTM B633, Des tW
Type III SC1 ign eig
Hot Dip Galvanized (HG): Thr Loa ht /
Conforms to ASTM A123 or Par ead d-l Pie
A153 tN Siz bs ( Fini ce (
o. e kN) sh lbs)
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
P1062 thru P2490
Materials &
Finishes - Standard: Pro
duc
Base Metal: Steel conforms tW
to ASTM A1011 SS GR 33, Hol eig
A1011 HSLAS GR 45, A36, e Di ht /
A575, A576, or A635. Par Ro am Pie
Electrogalvanized (EG): tN d Si ete Fini ce (
Conforms to ASTM B633, o. ze r sh lbs)
Type III SC1
Unistrut Defender (DF): P1062 5/16" 11/32" EG 0.18
Conforms to ASTM A1059
P1062 5/16" 11/32" HG 0.191
Hot Dip Galvanized (HG):
Conforms to ASTM A123 or P1062 5/16" 11/32" GR 0.18
A153
P1062 5/16" 11/32" ZD 0.18
Perma-Green (GR):
Conforms to commercial P1062 5/16" 11/32" SS 0.18
standards for powder
P1062 5/16" 11/32" ST 0.18
coating
Perma-Gold (ZD): P1062 5/16" 11/32" AL 0.06
Conforms to ASTM B633,
P1063 3/8" 7/16" EG 0.18
Type II SC1
Plain (PL): No finish P1063 3/8" 7/16" DF 0.191
Project:
Architect
/
Engineer:
Date: Phone:
HTHR
Materials:
Pro
Low Carbon Steel (Fy = duc
32,000 psi minimum, F t = tW
52,000 psi minimum) eig
Thr ht /
Finishes: Par ead Len Ft (l
tN Siz gth Fini bs/
Electrogalvanized (EG): o. e (ft) sh ft)
Conforms to ASTM B633,
Type III SC1 HTHR0 1/4" 10' EG 0.12
Unistrut Defender (DF): 25
Conforms to ASTM A1059
HTHR0 1/4" 12' EG 0.12
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -25
-------------------------------------------
Materials & Finishes - Special HTHR0 3/8" 10' EG 0.29
Metals: 37
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
HSQN
Finishes:
Prod
Electrogalvanized (EG): uct W
Conforms to ASTM B633, eight
Type III SC1 / Piec
Unistrut Defender (DF): Part Threa e (lbs
Conforms to ASTM A1059 No. d Size Finish )
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - HSQN02
- - - - - - - - - -1/4"
- - - - - - - -EG
- - - - - - -0.009
--------------------
Materials & Finishes - Special 5
Metals:
HSQN03 5/16" EG 0.016
1
Stainless Steel, Type 316
(SS): ASTM A240, Type 316 * HSQN03 3/8" EG 0.027
7
* These materials have
HSQN05 1/2" EG 0.058
different physical properties
and performance 0
characteristics. HSQN06 5 /8 " EG 0.107
Please contact us for design 2
support.
HSQN07 3/4" EG 0.154
5
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
HSHS
Materials:
Pro
Screws conform to SAE duc
J429 GR 2 (exceeds ASTM tW
A307). eig
Thr ht /
Finishes: Par ead Len Pie
tN Siz gth Fini ce (
Electrogalvanized (EG): o. e (ft) sh lbs)
Conforms to ASTM B633,
Type III SC1 HSHS0 1/4" 1/2" EG 0.014
Unistrut Defender (DF): 25050
Conforms to ASTM A1059
HSHS0 1/4" 5/8" EG 0.015
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -25062
--------------------------------------------
Materials & Finishes - Special HSHS0 1/4" 3/4" EG 0.017
Metals: 25075
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
HOCW
Finishes:
Prod
Electrogalvanized (EG): uct W
Conforms to ASTM B633, eight
Type III SC1 / Piec
Unistrut Defender (DF): Part Threa e (lbs
Conforms to ASTM A1059 No. d Size Finish )
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -HOCW0
- - - - - - - - -1/4"
- - - - - - - -EG
- - - - - - - -0.01
-------------------
Materials & Finishes - Special 25
Metals:
HOCW0 3/8" EG 0.015
37
Stainless Steel, Type 316
(SS): ASTM A240, Type 316 *
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
HRCN
Finishes:
Prod
Electrogalvanized (EG): uct W
Conforms to ASTM B633, eight
Type III SC1 / Piec
Unistrut Defender (DF): Part Threa e (lbs
Conforms to ASTM A1059 No. d Size Finish )
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - HRCN02
- - - - - - - - - -1/4"
- - - - - - - -EG
- - - - - - -0.019
--------------------
Materials & Finishes - Special 5
Metals:
HRCN03 5/16" EG 0.075
1
Stainless Steel, Type 316
(SS): ASTM A240, Type 316 * HRCN03 3/8" EG 0.09
7
* These materials have
HRCN03 3/8" DF 0.09
different physical properties
and performance 7
characteristics. HRCN04 7/16" EG 0.104
Please contact us for design 4
support.
HRCN05 1/2" EG 0.1
0
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
HRMS
Materials:
Pro
Screws conform to SAE duc
J429 GR 2 (exceeds ASTM tW
A307). eig
Thr ht /
Finishes: Par ead Len Pie
tN Siz gth Fini ce (
Electrogalvanized (EG): o. e (ft) sh lbs)
Conforms to ASTM B633,
Type III SC1 HRMS 1/4" 1/2" EG 0.01
Unistrut Defender (DF): 02505
Conforms to ASTM A1059 0
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -HRMS
- - - - - - -1/4"
- - - - - -3/4"
- - - - - - EG
- - - - - -0.012
-------------------
Materials & Finishes - Special 02507
Metals: 5
Project:
Architect
/
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
P2600
Project:
Architect /
Engineer:
Date: Phone:
Contractor:
Address:
Notes:
Approval Stamp:
Cush-A-Clamp®
006T01 1/4" 3/8" 0.37 (9 0.82 (21 1.13 (29 0.33 (8 EG 0.11
0 ) ) ) )
006T01 1/4" 3/8" 0.37 (9 0.82 (21 1.13 (29 0.33 (8 SS 0.11
0 ) ) ) )
010N01 1/2" 5/8" 0.62 (1 1.06 (27 1.54 (39 0.46 (1 EG 0.14
4 6) ) ) 2)
010N01 1/2" 5/8" 0.62 (1 1.06 (27 1.54 (39 0.46 (1 SS 0.14
4 6) ) ) 2)
010T01 1/2" 5/8" 0.62 (1 1.06 (27 1.54 (39 0.46 (1 EG 0.14
4 6) ) ) 2)
010T01 1/2" 5/8" 0.62 (1 1.06 (27 1.54 (39 0.46 (1 SS 0.14
4 6) ) ) 2)
011N01 3/8" 0.67 (17 1.13 (29 1.54 (39 0.49 (12 EG 0.14
4 ) ) ) )
012T01 5/8" 3/4" 0.75 (19 1.20 (31 1.68 (43 0.52 (13 EG 0.14
6 ) ) ) )
012T01 5/8" 3/4" 0.75 (19 1.20 (31 1.68 (43 0.52 (13 SS 0.14
6 ) ) ) )
014T01 3/4" 7/8" 0.87 (2 1.31 (33 1.82 (46 0.58 (1 EG 0.15
8 2) ) ) 5)
014T01 3/4" 7/8" 0.87 (2 1.31 (33 1.82 (46 0.58 (1 SS 0.15
8 2) ) ) 5)
016T02 1" 1.00 (2 1.44 (37 1.95 (50 0.65 (17 EG 0.17
0 5) ) ) )
016T02 1" 1.00 (2 1.44 (37 1.95 (50 0.65 (17 SS 0.17
0 5) ) ) )
017N02 3/4" 1.05 (27 1.50 (38 1.95 (50 0.70 (1 EG 0.17
2 ) ) ) 8)
017N02 3/4" 1.05 (27 1.50 (38 1.95 (50 0.70 (1 SS 0.17
2 ) ) ) 8)
018T02 1" 1-1/8" 1.12 (28 1.57 (40 2.08 (5 0.70 (1 EG 0.18
2 ) ) 3) 8)
018T02 1" 1-1/8" 1.12 (28 1.57 (40 2.08 (5 0.70 (1 SS 0.18
2 ) ) 3) 8)
020T0 1-1/4" 1.25 (32 1.70 (43 2.21 (56 0.77 (2 EG 0.18
24 ) ) ) 0)
020T0 1-1/4" 1.25 (32 1.70 (43 2.21 (56 0.77 (2 SS 0.18
24 ) ) ) 0)
021N02 1" 1.31 (33 1.76 (45 2.34 (5 0.81 (21 EG 0.19
6 ) ) 9) )
021N02 1" 1.31 (33 1.76 (45 2.34 (5 0.81 (21 SS 0.19
6 ) ) 9) )
022T02 1-1/4" 1-3/8" 1.37 (35 1.82 (46 2.34 (5 0.83 (21 EG 0.2
6 ) ) 9) )
022T02 1-1/4" 1-3/8" 1.37 (35 1.82 (46 2.34 (5 0.83 (21 SS 0.2
6 ) ) 9) )
034N0 2" 2-1/8" 2.12 (54 2.57 (6 3.23 (8 1.27 (32 EG 0.46
40 ) 5) 2) )
034N0 2" 2-1/8" 2.12 (54 2.57 (6 3.23 (8 1.27 (32 SS 0.46
40 ) 5) 2) )
050N0 3" 3.00 (7 3.57 (91 4.42 (11 1.78 (45 EG 0.6
54 6) ) 2) )
050N0 3-1/8" 3.12 (79 3.57 (91 4.42 (11 1.78 (45 EG 0.6
56 ) ) 2) )
056N0 3" 3.50 (8 3.95 (10 4.79 (12 1.97 (50 EG 0.64
62 9) 0) 2) )
056N0 3" 3.50 (8 3.95 (10 4.79 (12 1.97 (50 SS 0.64
62 9) 0) 2) )
072N0 4" 4.50 (11 4.95 (12 5.92 (15 2.53 (6 EG 1.1
80 4) 6) 0) 4)
072N0 4" 4.50 (11 4.95 (12 5.92 (15 2.53 (6 SS 1.1
80 4) 6) 0) 4)
082N0 5-1/8" 5.12 (13 5.57 (14 6.54 (16 2.84 (7 EG 1.25
90 0) 2) 6) 2)
098N1 6-1/8" 6.12 (15 6.57 (16 7.54 (19 3.34 (8 EG 1.3
06 5) 7) 2) 5)
Project: