Professional Documents
Culture Documents
65 Youngchun‐ri, Dongtan‐myun, 1521 E. Orangethorpe Ave. I’s Bid 7F, Shinyokohama 3‐18‐5, No. 38 South Tuanjie Road
Hwasung‐si, Kyungki‐do, 445‐813 Suite A Fullerton. Kouhoku, Yokohama‐si, Hi‐Tech Zone of Xi’an
Republic of Korea, 445‐813 CA 92831 United States of Kanagawa‐ken, Japan (222‐0033) Xi’an city, Shaanxi Province P.R
America +81 45 478 2202 China
+82 10 370 8600
+1 714 515 1100 gdjang@kmwinc.co.jp +86 29 8838 4888
bckim@kmw.co.kr
info@kmwcomm.com http://www.kmwcomm.com hanque1@htctelecom.com
http://www.kmw.co.kr http://www.kmwcomm.com http://htctelecom.com
www.kmwcomm.com
KMW Communications
R&D Oriented Global Leader
KMW Inc. has consistently invested 30% of total revenue KMW Inc. delivers innovative and core RF technology and
in R&D. Our outstanding Engineers who are dedicated to products. As we constantly produce new technology
R&D will seek creative Solutions to RF & Air Interface and pursue perfection, KMW Inc. will continue to build a
Products. With the upmost achieved RF patents, KMW reputation as a global leading company that offers
will continue to support our superior products to our the best solution for the wireless infrastructure market.
Customer Satisfaction Proactive Manner
KMW Inc. will insure customer satisfaction and high KMW Inc. is very proud to be regarded as an outstanding
reliability by maintaining quality control throughout company for providing Proactive & Dynamic manner
the design and manufacturing process to surpass throughout the world. Our ability to create and innovate,
customer expectations. we aggressively accept the challenges of future
technology and competitors.
Band Rejection Multi Step
Cross Band Coupler
Filter Combiner
In‐Band Combiner CAMS Controller
www.kmwcomm.com
KMW Communications
KMW Table of Product Contents
KMW Communications Introduction
Antenna Products
AISG High Broad Band Antenna
EDTA(Electrical Down Tilt) Antenna
Dual Phase® Antenna
Fixed Antenna
AISG Dual Broad Band Antenna
EDTA Antenna
AISG Low Broad Band Antenna
EDTA Antenna
WiMAX Antenna
EDTA Antenna
Dual Phase® Antenna
TMA Products
Tower Mounted Amplifiers
Power Distribution Unit
Filter
Band Rejection Filter: Triple Mode Filter (Black Hole Filter)
Multi Step Combiner: Spectrum Migration (Big Bang)
In Band Combiner
Dual Band Combiner
Cross Band Coupler
Cross Band Coupler with Sniffer Port
Cross Band Coupler with Sniffer & AISG Port
CAMS (Central Antenna Management System)
Accessories
Bias‐T
Controller
PAC‐I (Portable Antenna Controller)
PAC‐A (Portable Antenna Controller)
AICM (Air Interface Control Master)
TICU (Tower Interface Control Unit)
Bracket
Cables
www.kmwcomm.com
KMW Communications
About KMW KMW‐Simply Intelligent®
KMW has and continues to introduce the industry’s leading RF products. KMW‐Simply Intelligent® antenna,
TMA, CBC, and RF components has a proven track record in manufacturing RF products for OEM and wireless
operators since 1991.
Our “Research and Development” departments are located in Asia and United States with manufacturing
facilities in Korea and China. KMW is ISO certified and has over 200 RF patents and trademarks such as “Dual
Phase™” antenna.
OUR VISION
•Providing best solutions for the wireless industry
•Maintain strategic leadership in technology, quality, and cost
•Work together with people, friends, and family globally to share happiness and greater values
OUR MISSION
• RF Convergence ‐ provide most cost effective RF solutions by optimizing all resources
• Better call quality and less maintenance ‐ Increase capacity and decrease CAPEX/OPEX
• Create best values for customers, shareholders, and employees
KMW‐Simply Intelligent® is a development philosophy for our global product portfolio. We are the industry’s
leader in deployment of advance antenna systems. We take pride in responding to customer’s RF
requirements with rapid design cycles, short manufacturing ramp up times and best in class delivery time.
KMW‐Simply Intelligent® has a longstanding history of providing quality RF products to the global OEM world
and the wireless operators. KMW manufactures full range of 3G/4G products.
www.kmwcomm.com
KMW Communications
Antennas KMW Antenna Products
KMW‐Simply Intelligent® antenna portfolio systems utilize advanced phase shifter and radiation techniques. Our
patented Dual Band™ and hybrid antennas provide reliable, cost effective, remote “Tilt and Steering” capabilities
that enables significant savings, virtually eliminating the need for tower crews.
Antennas KMW Antenna System Summary
1. Dual Phase™ Technology
In recent years antennas began to enter the market with remote adjustable tilt function which made some
network optimization situations easier and considerably less expensive. KMW anticipated the need to make the
Azimuth beam remotely adjustable as well as the Down‐Tilt. Since the remote adjustability of the Tilt angle had
been known as “Single‐Phase, Adjustable,” referring to Remote Tilt and Azimuth adjustability as “Dual Phase™”
seemed only natural. Since then Dual‐Phase™ antennas have saved carriers Hundreds of Thousands of dollars in
CAPEX, due to the cost savings experienced in spite of the additional features, and OPEX experienced because of
the savings realized when a KMW antenna needed to be adjusted for network optimization, but the need to call a
tower crew to make the adjustments was not necessary.
2. KMW Single RET
KMW’s Dual‐Band antennas feature independent control of Electrical Down‐Tilt for each frequency band in the
antenna. While other antennas may require Two‐Independent RET (Remote Electrical Tilt) module functions for
independent control of each band, the KMW Dual‐Band antennas allow independent control of both bands
through a single innovative RET Module.
3. KMW High / Low Broad Band Antenna
With the recent acquisition of additional frequency bandwidth in the “700 MHz band” by carriers, KMW
recognized the need to replace existing AWS and PCS‐only antennas with “Dual‐Band” antennas in order to take
advantage of the newly allocated frequencies without having to acquire additional Cell‐Sites and fight additional
zoning restrictions. The product offering listed here is yet another example of KMW’s ability to anticipate and
meet the needs of the carriers.
4. WiMAX / LTE Antenna
KMW’s WiMAX / LTE product line reflects our ability to address diverse product requirements that meets and
exceeds customer’s requirements. The WiMAX / LTE products were developed to meet the stringent
requirements the budding 4G Network push. The antennas and their peripherals are suitable for many WiMAX
and LTE (Long Term Evolution) data and voice applications
www.kmwcomm.com
KMW Communications
TMA KMW TMA Products
KMW provides High Performance Tower Mounted Amplifiers (TMA) that utilize filter technology to provide very low loss and low
noise figure. Our single/ twin and dual wide band TMA operates seamlessly with our D.C. pulse antenna control scheme.
Product Category Part Number Description
AWS Twin TMA KUNAPC101000 1710~1755MHz (45MHz)/ 2110~2155MHz (45MHz)
TMA PCS TMA KUNATC1030010 1850~1910MHz (60MHz) / 1930~1990MHz (60MHz)
AWS Twin TMA KUNAPA103001 1710~1770MHz / 2110~2170MHz
(Broad Band)
Dual Band‐AWS KUNAPA1050010 698~746MHz / 2110~2170MHz
Twin with Dual 700
Bypass
Dual Band TMA KUNAPA102001 698~716MHz / 728~746MHz / 1710~1770MHz / 2110~2170MHz
Dual Band 700 KUNAPA101001 698~746MHz / 2110~2170MHz / 1710~1770MHz
Bypass
Sing Band 700MHz KUNAPA1040010 698~716MHz/ 728~746MHz
Wide Band TMA KUNAPS2020000 4G WiMAX Full Band TTLNA. Improved User selection Mode.
Diversity port for AISG and Dc feeding
PDU KMW Power Distribution Unit
Power Distribution Units are rugged and designed to provide reliable, well conditioned power for our TMAs and other
peripheral devices.
www.kmwcomm.com
KMW Communications
Filter Triple Mode Technology (Black Hole Filter)
<Triple Mode Resonance & Triple Notches from One Ceramic DR>
Advanced Technology
• Triple Mode Resonance & Triple Notches from
One Ceramic DR.
• Ceramic Resonator fabrication with maximum Q
factor, accurate resonant frequency and
temperature coefficient.
• Extremely sharp rejection & high power handling.
Key Benefits
• Frequency full utilization
• Low Insertion Loss
• Small Size & Light Weight
• Low Inter Modulation Distortion
• Cast Design & High Productivity
Compared Conventional vs. Black Hole Filter
Freq: 860MHz Q: Single Cavity Size (90 x 90 x 90mm)
Cavity Filter Ceramic Filter Ceramic Filter Super
Black Hole Filter
(TEM mode) (TM mode) (TEσ01 mode) Conductor
Filter KMW Filter Products
Base Station Co‐Siting Solution is a growing trend in the mobile/wireless industry. We provide effective, reliable frequency
multiplexers with low‐loss single‐band/ dual band/tri‐band solutions.
CAMS Central Antenna Management System
Web interface Central Antenna Management System allows easy communication module, user update function for additional
network elements, managed security module, and automatic optimization and load balancing to users to save cost, improve
customer satisfaction, and reduce churn.
www.kmwcomm.com
KMW Communications
Accessories KMW Accessory Products
KMW manufactures antenna’s mounting accessories. Our products include convenience components, such as Bias‐Ts,
mechanical tilt brackets, and control cables.
Antenna Products
www.kmwcomm.com
KMW Communications
Horizontal 65˚
Beamwidth
Vertical 7.5˚
Impedance 50Ω
VSWR ≤1.4:1
Mechanical Specification
Horizontal Pattern Vertical Pattern (Downtilt 0˚)
Dimension (Diameter×H) Φ156×1219mm(Φ6.2×48inch)
www.kmwcomm.com
KMW Communications
Horizontal 65˚
Beamwidth
Vertical 5.0˚
Impedance 50Ω
VSWR ≤1.4:1
Mechanical Specification
Dimension (Diameter) Φ156×1829mm(Φ6.2×72inch)
Horizontal Pattern Vertical Pattern(Downtilt 0˚) Weight (Without clamp) 12.5 kg(27.55 lb)
www.kmwcomm.com
KMW Communications
Horizontal 90˚
Beamwidth
Vertical 7.8˚
Impedance 50Ω
VSWR ≤1.4:1
Mechanical Specification
Dimension (Diameter×H) Φ156×1219mm (Φ6.2×48inch)
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Weight (Without clamp) 9.0 kg (19.84 lb)
www.kmwcomm.com
KMW Communications
Horizontal 45˚
Beamwidth
Vertical 7.5˚
Impedance 50Ω
VSWR ≤1.4:1
Mechanical Specification
Horizontal Pattern Vertical Pattern(Downtilt 0˚) Dimension(Diameter×H) Φ256×1219mm(Φ10.08×48inch)
www.kmwcomm.com
KMW Communications
Horizontal 33˚
Beamwidth
Vertical 7.2˚
Impedance 50Ω
VSWR ≤1.4:1
Mechanical Specification
Horizontal Pattern Vertical Pattern(Downtilt 0˚) Dimension(Diameter×H) Φ256×1219mm(Φ10.08×48inch)
www.kmwcomm.com
KMW Communications
Horizontal 33˚
Beamwidth
Vertical 4.2˚
Impedance 50Ω
VSWR ≤1.4:1
Mechanical Specification
Dimension(Diameter×H) Φ256×2131mm(Φ10.08×83.9inch)
www.kmwcomm.com
KMW Communications
Horizontal 65˚
Beamwidth
Vertical 16.0˚
VSWR ≤1.4:1
Impedance 50Ω
l Mechanical Specification
www.kmwcomm.com
KMW Communications
Block Diagram
www.kmwcomm.com
KMW Communications
Horizontal 65˚
Beamwidth
Vertical 16.0˚
VSWR ≤1.4:1
Impedance 50Ω
Mechanical Specification
l Dimension(Dia.×H) Φ8.11×24 inches
www.kmwcomm.com
KMW Communications
3WAY Combiner
Frequency Range 1710~2180MHz
VSWR ≤1.3:1
Impedance 50Ω
Block Diagram
+45 -45
Control
www.kmwcomm.com
KMW Communications
Mechanical Specification
www.kmwcomm.com
KMW Communications
[700MHz_Band Pattern]
[AWS_Band Pattern]
www.kmwcomm.com
KMW Communications
Mechanical Specification
Dimension (W×D×H) 12.6×7.87×54 inches
www.kmwcomm.com
KMW Communications
[700MHz_Band Pattern]
www.kmwcomm.com
KMW Communications
Mechanical Specification
Dimension (W×D×H) 12.6×7.87×54 inches
Weight (Without clamp) 15.0 kg (33.0 lb)
Connector 4 x 7/16 DIN(F),Bottom
www.kmwcomm.com
KMW Communications
[700MHz_Band Pattern]
[AWS_Band Pattern]
www.kmwcomm.com
KMW Communications
Impedance 50Ω
VSWR ≤1.4:1
10.0 dB @ ±60˚
Cross Pole Discrimination
15.0 dBi @ 0˚
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
11.8×5.9×48 inches
Dimension (W×D×H)
(300×150×1219 mm)
Connector
2 x 7/16 DIN(F), Long Neck
www.kmwcomm.com
KMW Communications
RET
700MHz 700MHz
+45˚ 45˚
www.kmwcomm.com
KMW Communications
2
1
3
4
5
MOUNT POLE
Ø1.97 ~ 3.15inch OD. No. PART NAME Q'TY Recommending Torque
(50 ~ 80mm OD.) 1 FIXED CLAMP 4
2 Hex. Cap Bolt, M10 4 17mm Spanner
3 Plain Washer, M10 4
208lbf.inch
4 Spring Washer, M10 4
5 240kgf.cm
Hex. Nut, M10 8
www.kmwcomm.com
KMW Communications
Impedance 50Ω
VSWR ≤1.4:1
10.0 dB @ ±60˚
Cross Pole Discrimination
15.0 dBi @ 0˚
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
11.8×5.9×72 inches
Dimension (W×D×H)
(300×150×1829mm)
Connector
2 x 7/16 DIN(F), Long Neck
www.kmwcomm.com
KMW Communications
RET
700MHz 700MHz
+45˚ 45˚
www.kmwcomm.com
KMW Communications
2
1
3
4
5
MOUNT POLE
Ø1.97 ~ 3.15inch OD. No. PART NAME Q'TY Recommending Torque
(50 ~ 80mm OD.) 1 FIXED CLAMP 4
2 Hex. Cap Bolt, M10 4 17mm Spanner
3 Plain Washer, M10 4
208lbf.inch
4 Spring Washer, M10 4
5 240kgf.cm
Hex. Nut, M10 8
www.kmwcomm.com
KMW Communications
Impedance 50Ω
VSWR ≤1.4:1
10.0 dB @ ±60˚
Cross Pole Discrimination
15.0 dBi @ 0˚
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
Connector
2 x 7/16 DIN(F), Long Neck
www.kmwcomm.com
KMW Communications
RET
700MHz 700MHz
+45˚ 45˚
www.kmwcomm.com
KMW Communications
2
1
3
4
5
MOUNT POLE
Ø1.97 ~ 3.15inch OD. No. PART NAME Q'TY Recommending Torque
(50 ~ 80mm OD.) 1 FIXED CLAMP 4
2 Hex. Cap Bolt, M10 4 17mm Spanner
3 Plain Washer, M10 4
208lbf.inch
4 Spring Washer, M10 4
5 240kgf.cm
Hex. Nut, M10 8
www.kmwcomm.com
KMW Communications
Impedance 50Ω
VSWR ≤1.4:1
10.0 dB @ ±60˚
Cross Pole Discrimination
15.0 dB @0˚
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
Connector
2 x 7/16 DIN(F), Long Neck
www.kmwcomm.com
KMW Communications
RET
700MHz 700MHz
+45˚ 45˚
www.kmwcomm.com
KMW Communications
2
1
3
4
5
MOUNT POLE
Ø1.97 ~ 3.15inch OD. No. PART NAME Q'TY Recommending Torque
(50 ~ 80mm OD.) 1 FIXED CLAMP 4
2 Hex. Cap Bolt, M10 4 17mm Spanner
3 Plain Washer, M10 4
208lbf.inch
4 Spring Washer, M10 4
5 8 240kgf.cm
Hex. Nut, M10
www.kmwcomm.com
KMW Communications
Impedance 50Ω
VSWR ≤1.4:1
10.0 dB @ ±60˚
Cross Pole Discrimination
15.0 dB @0˚
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
Connector
2 x 7/16 DIN(F), Long Neck
www.kmwcomm.com
KMW Communications
RET
700MHz 700MHz
+45˚ 45˚
www.kmwcomm.com
KMW Communications
2
1
3
4
5
MOUNT POLE
Ø1.97 ~ 3.15inch OD. No. PART NAME Q'TY Recommending Torque
(50 ~ 80mm OD.) 1 FIXED CLAMP 4
2 Hex. Cap Bolt, M10 4 17mm Spanner
3 Plain Washer, M10 4
208lbf.inch
4 Spring Washer, M10 4
5 8 240kgf.cm
Hex. Nut, M10
www.kmwcomm.com
KMW Communications
Impedance 50Ω
VSWR ≤1.4:1
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
Connector
2 x 7/16 DIN(F), Long Neck
www.kmwcomm.com
KMW Communications
RET
700MHz 700MHz
+45˚ 45˚
www.kmwcomm.com
KMW Communications
2
1
3
4
5
MOUNT POLE
Ø1.97 ~ 3.15inch OD. No. PART NAME Q'TY Recommending Torque
(50 ~ 80mm OD.) 1 FIXED CLAMP 4
2 Hex. Cap Bolt, M10 4 17mm Spanner
3 Plain Washer, M10 4
208lbf.inch
4 Spring Washer, M10 4
5 8 240kgf.cm
Hex. Nut, M10
www.kmwcomm.com
KMW Communications
Mechanical Specification
11.8×5.9×48 inches
Dimension (W×D×H)
(300×150×1219mm)
Connector
4 x 7/16 DIN(F), Long Neck
www.kmwcomm.com
KMW Communications
RET
AWS
AWS
45˚
+45˚
700MHz
700MHz
45˚
+45˚
www.kmwcomm.com
KMW Communications
2
1
3
4
5
MOUNT POLE
Ø1.97 ~ 3.15inch OD. No. PART NAME Q'TY Recommending Torque
(50 ~ 80mm OD.) 1 FIXED CLAMP 4
2 Hex. Cap Bolt, M10 4 17mm Spanner
3 Plain Washer, M10 4
208lbf.inch
4 Spring Washer, M10 4
5 240kgf.cm
Hex. Nut, M10 8
www.kmwcomm.com
KMW Communications
Mechanical Specification
11.8×5.9×72 inches
Dimension (W×D×H)
(300×150×1829mm)
Weight (Without clamp) 48.5 lbs (22.0 kg)
Connector
300 4 x 7/16 DIN(F), Long Neck
www.kmwcomm.com
KMW Communications
RET
AWS
AWS
45˚
+45˚
700MHz
700MHz
45˚
+45˚
www.kmwcomm.com
KMW Communications
2
1
3
4
5
MOUNT POLE
Ø1.97 ~ 3.15inch OD. No. PART NAME Q'TY Recommending Torque
(50 ~ 80mm OD.) 1 FIXED CLAMP 4
2 Hex. Cap Bolt, M10 4 17mm Spanner
3 Plain Washer, M10 4
208lbf.inch
4 Spring Washer, M10 4
5 240kgf.cm
Hex. Nut, M10 8
www.kmwcomm.com
KMW Communications
Mechanical Specification
Connector
4 x 7/16 DIN(F), Long Neck
www.kmwcomm.com
KMW Communications
RET
AWS
AWS
45˚
+45˚
700MHz
700MHz
45˚
+45˚
www.kmwcomm.com
KMW Communications
2
1
3
4
5
MOUNT POLE
Ø1.97 ~ 3.15inch OD. No. PART NAME Q'TY Recommending Torque
(50 ~ 80mm OD.) 1 FIXED CLAMP 4
2 Hex. Cap Bolt, M10 4 17mm Spanner
3 Plain Washer, M10 4
208lbf.inch
4 Spring Washer, M10 4
5 240kgf.cm
Hex. Nut, M10 8
www.kmwcomm.com
KMW Communications
Impedance 50Ω
87˚ @ 1710-1755MHz
85˚ @ 698-806MHz
Horizontal 85˚ @ 1850-1900MHz
80˚ @ 824-894MHz 82˚ @ 2110-2155MHz
Beamwidth
8.5˚ @ 1710-1755MHz
18.2˚ @ 698-806MHz
Vertical 8.2˚ @ 1850-1900MHz
17˚ @ 824-894MHz 7.8˚ @ 2110-2155MHz
VSWR ≤1.5:1
Mechanical Specification
www.kmwcomm.com
KMW Communications
RET
AWS
AWS
45˚
+45˚
700MHz
700MHz
45˚
+45˚
www.kmwcomm.com
KMW Communications
2
1
3
4
5
MOUNT POLE
Ø1.97 ~ 3.15inch OD. No. PART NAME Q'TY Recommending Torque
(50 ~ 80mm OD.) 1 FIXED CLAMP 4
2 Hex. Cap Bolt, M10 4 17mm Spanner
3 Plain Washer, M10 4
208lbf.inch
4 Spring Washer, M10 4
5 240kgf.cm
Hex. Nut, M10 8
www.kmwcomm.com
KMW Communications
Impedance 50Ω
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
www.kmwcomm.com
KMW Communications
RET
AWS
AWS
45˚
+45˚
700MHz
700MHz
45˚
+45˚
www.kmwcomm.com
KMW Communications
2
1
3
4
5
MOUNT POLE
Ø1.97 ~ 3.15inch OD. No. PART NAME Q'TY Recommending Torque
(50 ~ 80mm OD.) 1 FIXED CLAMP 4
2 Hex. Cap Bolt, M10 4 17mm Spanner
3 Plain Washer, M10 4
208lbf.inch
4 Spring Washer, M10 4
5 240kgf.cm
Hex. Nut, M10 8
www.kmwcomm.com
KMW Communications
Impedance 50Ω
VSWR ≤1.5:1
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
www.kmwcomm.com
KMW Communications
RET
AWS
AWS
45˚
+45˚
700MHz
700MHz
45˚
+45˚
www.kmwcomm.com
KMW Communications
2
1
3
4
5
MOUNT POLE
Ø1.97 ~ 3.15inch OD. No. PART NAME Q'TY Recommending Torque
(50 ~ 80mm OD.) 1 FIXED CLAMP 4
2 Hex. Cap Bolt, M10 4 17mm Spanner
3 Plain Washer, M10 4
208lbf.inch
4 Spring Washer, M10 4
5 240kgf.cm
Hex. Nut, M10 8
www.kmwcomm.com
KMW Communications
Horizontal 65˚
Beamwidth
Vertical 15˚
Impedance 50Ω
VSWR ≤1.4:1
Polarization Vertical
Mechanical Specifications
Dimension(W×D×H) 12.6×5.9×54inches
Weight (Without clamp) 12.0 kg (26.45 lb)
www.kmwcomm.com
KMW Communications
Electrical Specification
Frequency Range 2496~2690MHz
Horizontal 65˚
Beamwidth
Vertical 7˚
Impedance 50Ω
Mechanical Specification
Antenna
6.54×2.6×48.00 inch
Dimension (Without clamp)
RET 2.34×1.18×7.73 inch
Antenna
14.2 lbs
Weight (Without clamp)
RET 1.2 lbs
www.kmwcomm.com
KMW Communications
www.kmwcomm.com
KMW Communications
Electrical Specification
Frequency Range 2496~2690MHz
Horizontal 65˚
Beamwidth
Vertical 7˚
Impedance 50Ω
Mechanical Specification
Antenna
6.54×2.6×48.00 inch
Dimension (Without clamp)
RET 2.34×1.18×7.73 inch
Antenna
14.2lbs X 3 (42.6 lbs)
Weight (Without clamp)
RET 1.2 lbs X 3 (3.6 lbs)
www.kmwcomm.com
KMW Communications
www.kmwcomm.com
KMW Communications
Gain 4×18.0dBi
Horizontal 65˚
Beamwidth
Vertical 6.5˚
Impedance 50Ω
VSWR ≤1.4:1
Mechanical Specification
M
Dimension(W×D×H) 10×3.54×48inches
Electrical Down Tilt and Azimuth Steering Antenna For Mobile Communications
Electrical Specification
Frequency Range 2496~2690MHz
Gain 17.5 dBi
Horizontal 65˚
Beamwidth
Vertical 7˚
Impedance 50Ω
VSWR ≤1.35:1(Downtilt 0˚ ~ 10˚)
Polarization Dual, Slant ±45˚
Upper 1st Sidelobe Suppression ≥18 dB (@downtilt 0˚)
Front-to-Back Ratio ≥30 dB
Adjustable Downtilt Range 0˚ ~ 10˚
Horizontal Beam Steering -30˚ ~ +30˚
Port-to-port Isolation ≥25 dB
Passive Intermodulation, IM3 ≤ -153 dBc
Input Maximum CW Power 300 W
Control Interface AISG (Version 2.0)
Mechanical Specification
Antenna
7.32×48.00 inch
Dimension (Without clamp)
www.kmwcomm.com
KMW Communications
Dual Phase Electrical Down Tilt & Azimuth Steering For Mobile Communications
www.kmwcomm.com
KMW Communications
www.kmwcomm.com
KMW Communications
www.kmwcomm.com
KMW Communications
Gain 4×18.0dBi
Horizontal 65˚
Beamwidth
Vertical 6.5˚
Impedance 50Ω
VSWR ≤1.4:1
Mechanical Specification
Dimension(W×D×H) 10.0×3.54x48inches
Weight (Without clamp) 13.5 kg
Connector 4 x 7/16 Din(F)/Bottom
Max Wind Speed 135mph (60m/s)
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
www.kmwcomm.com
KMW Communications
Gain 4×16.0dBi
Horizontal 90˚
Beamwidth
Vertical 6.5˚
Impedance 50Ω
VSWR ≤1.4:1
Mechanical Specification
Dimension(W×D×H) 10.0×3.54x48inches
Weight (Without clamp) 13.5 kg
Connector 4 x 7/16 Din(F)/Bottom
Max Wind Speed 135mph (60m/s)
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
www.kmwcomm.com
KMW Communications
Hybrid 2 way Quad Pol. Antenna Electrical Downtilt & Steering For Mobile Communications
Gain 4×17.5dBi
Horizontal 65˚
Beamwidth
Vertical 6.5˚
Impedance 50Ω
VSWR ≤1.43:1
Mechanical Specification
Dimension(W×D×H) Φ10.0×48inches
www.kmwcomm.com
KMW Communications
Hybrid 2 way Quad Pol. Antenna Electrical Downtilt & Steering For Mobile Communications
Gain 4×16.0dBi
Horizontal 90˚
Beamwidth
Vertical 6.5˚
Impedance 50Ω
VSWR ≤1.43:1
Mechanical Specification
Dimension(W×D×H) Φ10.0×48inches
www.kmwcomm.com
0 KMW Communications
TMA Products
www.kmwcomm.com
0 KMW Communications
www.kmwcomm.com
0 KMW Communications
Parameter Specification
Temperature range -40°C to _ 65°C
Humidity 20-100
Air Pressure, kpa 86 to 106
Solar radiation, W/m2 1120
Environmental
Lightning Protection 20KA, 8/20us
Specification
EMC and safety approvals EN 301 489-8 (2002-08)
Weather protection IP67
Wind load@115km/h 35N
Wind Speed 55ml / s
www.kmwcomm.com
0 KMW Communications
A n te n n a
RET
A IS G C a b le
R F F e e d e r 1 . A IS G [ R S 4 8 5 ] RF Feeder
2. D C Pow er
TM A
M a in D iv .
RF Feeder
1. RF
2 . A IS G [ O O K ]
RF Feeder 3. D C Pow er
1. RF
2 . A IS G [ O O K ]
3. D C Pow er
O O K B ia s - T
R G 3 1 6 C a b le
1 . A IS G [ O O K ]
2. DC Pow er
R G 3 1 6 C a b le
O O K B ia s - T 1 . A IS G [ O O K ]
2. DC Pow er
RF Feeder
RF Feeder
BTS T IC U
( A IS G P rim a ry S ta tio n )
www.kmwcomm.com
0 KMW Communications
[Drawing]
ANT 1
RBS 1
(TMA DC)
ANT 2
RBS 2
(ANT DC)
(ANT DC)
www.kmwcomm.com
0 KMW Communications
Parameter Specification
Electrical Frequency Range 1850 ~ 1910 MHz (60MHz)
Specification
Uplink Gain 12 ±1 dB
Ripple 1.6 dB max.
Return Loss ≥ 18dB
Noise Figure 2.0 dB Max.
OIP3 +25 dBm. Max.
Total Group Delay < 160 ns
Group Delay variation < 100 ns
Group Delay distortion < 10 ns (any 240 KHz)
Bypass Insertion Loss < 2.95dB max.
Bypass Return Loss > 14dB
Supply voltage [V] +10 ~ +30
Impedance 50 ohms
Weight 6.2 Kg
www.kmwcomm.com
0 KMW Communications
Parameter Specification
Temperature Range -40°C to +65°C
Humidity 20 ~ 100
Thermal Shock IEC 68 2-14, Test Na
Altitude (ft) 11,000
Air Pressure (kpa) 86 to 106
Solar Radiation [W/m^2] 1120
Environmental
Specification Salt fog IEC 68-2-11
Lightning Protection ±20KA, 8/20us. ALL port
EN 301 489-8 (2002-08)
EMC and safety approvals
-RE, CE, ESD, EFT
Weather protection IP66
Sand and Dust IEC 68-2-68
Wind Load @ 115 [km/h] 50
Wind Speed [km.h] >200
A n te n n a
R E T
A IS G C a b le
R F Feeder 1 . A IS G [ R S 4 8 5 ] R F Feed er
2. D C P o w er
TM A
M a in D iv .
R F Feeder
1. R F
2. A IS G [ O O K ]
R F Feeder 3. D C P ow er
1. R F
2. A IS G [ O O K ]
3. D C P ow er
O O K B ia s - T
R G 316 C a b le
1 . A IS G [ O O K ]
2. D C P o w er
R G 3 1 6 C a b le
O O K B ia s - T 1 . A IS G [ O O K ]
2. D C P o w er
R F Feeder
R F Feed er
B TS T IC U
( A IS G P rim a ry S ta tio n )
www.kmwcomm.com
0 KMW Communications
[Drawing]
ANT 1
RBS 1
(TMA DC)
ANT 2
RBS 2
(ANT DC)
(ANT DC)
www.kmwcomm.com
0 KMW Communications
Gain 13dB±1dB
Filter Rejection @ 1700MHz 25dBc. min
IP Rating IP67
www.kmwcomm.com
0 KMW Communications
[Drawing]
ANT 1 ANT 2
www.kmwcomm.com
0 KMW Communications
Gain 13dB±1dB
Filter Rejection @ 1700MHz 25dBc. min
IP Rating IP67
www.kmwcomm.com
0 KMW Communications
[Drawing]
www.kmwcomm.com
0 KMW Communications
Gain, dB 13dB±1dB
Bandpass= 15.5MHz, Roll off begins at 699.25
15.5MHz
and 714.75MHz
Filter Rejection @ 697.8MHz 40dB min
Filter Rejection @ 716.2MHz 40dB min
Noise Figure, dB @ -40˚C ~ +65˚C 2.0dB. max
Normal 18.0dB. min
Return Loss, dB
Bypass 15.0dB. min
Bypass loss, dB 2.6dB. max
Input IP3, dBm @ -40˚C ~ +65˚C +10dBm. min
700M TX Frequency Range, MHz 728 ~ 746MHz
Down Link
Insertion Loss, dB 0.55 max
Return Loss, dB 18.0dB. min
Maximum Input Power AVG : 500watt, Peak : 5,000watt
Intermodulation @ antenna ports 155dBc. min
Group Delay Variation
50nS. max
(over any 180KHz with in Band pass)
AWS Up-Link Frequency Range 1710 ~ 1770MHz
TX Band Rejection, dB 80dBc. min
Gain 13dB±1dB
Filter Rejection @ 1700MHz 25dBc. min
www.kmwcomm.com
0 KMW Communications
IP Rating IP67
www.kmwcomm.com
0 KMW Communications
[Drawing]
ANT 1 ANT 2
BTS RET
www.kmwcomm.com
0 KMW Communications
IP Rating IP67
www.kmwcomm.com
0 KMW Communications
[Drawing]
230.0
174.0 87.0
www.kmwcomm.com
0 KMW Communications
Gain, dB 13dB±1dB
Bandpass= 15.5MHz, Roll off begins at 699.25
15.5MHz
and 714.75MHz
Filter Rejection @ 697.8MHz 40dB min
Filter Rejection @ 716.2MHz 40dB min
Noise Figure, dB @ -40˚C ~ +65˚C 2.0dB. max
Normal 18.0dB. min
Return Loss, dB
Bypass 15.0dB. min
Bypass loss, dB 2.4dB. max
Input IP3, dBm @ -40˚C ~ +65˚C +10dBm. min
700M TX Frequency Range, MHz 728 ~ 746MHz
Down Link
Insertion Loss, dB 0.55 max
Return Loss, dB 18.0dB. min
Maximum Input Power AVG : 500watt, Peak : 5,000watt
PIM @ ANT port 155dBc. min
Phase Linearity Variation
40deg. max
(over any 180KHz with in Band pass)
Group Delay Variation
50nS. max
(over any 180KHz with in Band pass)
Amplitude Variation
0.3dB. max
(over any 180KHz with in Band pass)
Environmental DC Input Range +7.0 ~ +30V
IP Rating IP67
www.kmwcomm.com
0 KMW Communications
[Drawing]
ANT 1 ANT 2
www.kmwcomm.com
0 KMW Communications
1. Electrical Specifications
Tx (UL) path
Frequency 2502~2690MHz
1.0dB(room temperature)
Insertion loss 2502~2690MHz
1.1dB(operating temperature)
Ripple +/-0.5dB
www.kmwcomm.com
0 KMW Communications
Rx (UL) path
Ripple +/-0.75dB
OIP3 +33dBm
2.0dB(room temperature)
Noise Figure 2502~2690MHz
2.2dB(operating temperature)
DC feeding BTS 0, 1
Design reference is
Signal BW 10MHz
www.kmwcomm.com
0 KMW Communications
www.kmwcomm.com
0 KMW Communications
• Mode recovery is manual remotely re-settable for TICU (using web GUI)
• Remotely TTLNA RF sync. mode setting Parameters for TICU.
Parameter Specification
Signal BW 10M
Total 47
Symbol count DL 28
UL 19
www.kmwcomm.com
0 KMW Communications
TTG(delayed time)
Environmental Specifications
Parameter Specification Remark
Mechanical Specifications
Parameter Specification Remark
17.2 ×7.32 ×2.84 Without BKT
Size [Inch]
19.4 ×7.32 ×3.67 With BKT
www.kmwcomm.com
0 KMW Communications
[Mechanical Drawing]
www.kmwcomm.com
0 KMW Communications
Parameter Specification
Output current alarm thresholds B path LNA fai : l320 ± 20 mA per DC port
- alarm : short((LOW)
Weight 1.1 Kg
Ingress protection IP 30
Environmental
Specification DC output port 1KA, 8/20uS
Lightening protection
DC input port 1KA, 8/20uS
www.kmwcomm.com
0 KMW Communications
[Mechanical Drawing]
www.kmwcomm.com
0 KMW Communications
Filter
www.kmwcomm.com
0 KMW Communications
Techinical Specification
Product Number K09FT165Z
RX Path : 698.3 ~ 715.7MHz
Pass Band
TX Path : 728.3 ~ 745.7MHz
Insertion Loss < 0.25dB
Attenuation
@ 696.8 ~ 697.8MHz > 20.0dB
@ 716.2 ~ 717.2MHz
VSWR < 1.3
Impedance 50Ω
< -160 dBc.
Intermodulation
(@RX Band, With Tx Band 2 * 20 W)
Input Power < 100W
Temperature -30 ~ +65Ԩ
IP Rating IP66
Weight TBD
Connector *Option(N, SMA Available)
270 × 251 × 150 mm
Dimension (W×D×H)
(excluding mounting brackets)
www.kmwcomm.com
0 KMW Communications
Techinical Specification
Product Number K09UN131Z
www.kmwcomm.com
0 KMW Communications
Techinical Specification
Product Number KDXCV06180000
15MHz BW RBS System A in UMTS 2100
Pass Band
15MHz BW RBS System B in UMTS 2100
In Band : 0.4dB
Insertion Loss
Band Edge : 0.6dB
Return Loss 19dB
Isolation 40dB
Impedance 50Ω
< -163 dBc.
Intermodulation
(@RX Band, With Tx Band 2 * 20 W)
Voltage : 40V, Current : 3A,
DC path
DC Resistance : 0.1ohm Max.
Operating Power 150W
Design endurable DC by pass
Lightning protection
against Lightning
Temperature -33 ~ +55Ԩ
IP Rating IP65
Weight (without BKT) 7.0 Kg
Connector 7-16 Female
197x197x100
Dimension (W×D×H)
(excluding mounting brackets)
www.kmwcomm.com
0 KMW Communications
Techinical Specification
KFTCD00140010
Product Number
KFTCD00140020
10MHz(15MHz)BW RBS System A
Pass Band
15MHz(10MHz)BW RBS System B
In Band : 0.7dB
Insertion Loss
Band Edge : 0.9dB
Isolation 30dB
Impedance 50Ω
IP Rating IP65
255x255x110
Dimension (W×D×H)
(excluding mounting brackets)
www.kmwcomm.com
0 KMW Communications
Electrical Specifications
Specifications
Requirements
PCS AWS
1710 – 1755MHz
Frequency Range 1850 – 1990 MHz
2110 – 2155MHz
Insertion loss 0.3dB Max. 0.2dB Max.
Impedance 50Ω
Dimension (W×H×D)
127 x 220 x 55mm
(Excluding mounting brackets)
Weight
2.8 Kg [6.2 lbs]
(Excluding mounting brackets)
www.kmwcomm.com
0 KMW Communications
[Simulation Data]
[Drawing]
www.kmwcomm.com
0 KMW Communications
Electrical Specifications
Specifications
Requirements
700MHz AWS
Frequency Range 698 – 894 MHz 1710 – 2170MHz
Phase Linearity Variation 1degree Max. (over any 180KHz within Band pass)
Group Delay Variation 2ns Max. (over any 180KHz within Band pass)
DC Breakdown 3500Volts
DC
Lightning
2kA (820usec)
Protection
Impedance 50Ω
www.kmwcomm.com
0 KMW Communications
[Mechanical Drawing]
700MHz
COM
AWS
www.kmwcomm.com
0 KMW Communications
Electrical Specifications
Specifications
Requirements
700MHz AWS
Frequency Range 698 – 894 MHz 1710 – 2170MHz
Phase Linearity Variation 1degree Max. (over any 180KHz within Band pass)
Group Delay Variation 2ns Max. (over any 180KHz within Band pass)
DC Breakdown 3500Volts
DC
Lightning
2kA (820usec)
Protection
Impedance 50Ω
www.kmwcomm.com
0 KMW Communications
[Mechanical Drawing]
MON
700MHz
COM
AWS
www.kmwcomm.com
0 KMW Communications
Cross Band Coupler with Sniffer & AISG Port For Mobile Communications
Electrical Specifications
Specifications
Requirements
700MHz AWS
Frequency Range 698 – 894 MHz 1710 – 2170MHz
Phase Linearity Variation 1degree Max. (over any 180KHz within Band pass)
Group Delay Variation 2ns Max. (over any 180KHz within Band pass)
DC Breakdown 3500Volts
DC
Lightning
2kA (820usec)
Protection
Impedance 50Ω
*The procedure of the rational interface can be adjusted from AISG1.1 to 3GPP/AISG2.0 and vice versa
with Layer 2 / Layer 7 reset commands.
www.kmwcomm.com
0 KMW Communications
Cross Band Coupler with Sniffer & AISG Port For Mobile Communications
[Mechanical Drawing]
RET
MON
700MHz
COM
AWS
www.kmwcomm.com
KMW Communications
Accessories
www.kmwcomm.com
KMW Communications
Electrical Specification
Frequency Range 1,710~2,170㎒
8/20㎲
Surge Arrestor
±20㎄
Impedance 50Ω
Mechanical Specification
BTS (RF) N(M)
Connector ANT (RF/DC) N(F)
DC SMA(F)
Environmental Specification
Operating Temperature -35~+65℃
www.kmwcomm.com
KMW Communications
www.kmwcomm.com
KMW Communications
Electrical Specification
Frequency Range 1850~1990㎒
8/20㎲
Surge Attester
±20㎄
Impedance 50Ω
Mechanical Specification
BTS(RF) 7/16 DIN(M)
Connector ANT(RF+DC) 7/16 DIN(F)
DC SMA(F)
Environmental Specification
Operating Temperature -35~+65℃
www.kmwcomm.com
KMW Communications
www.kmwcomm.com
KMW Communications
Electrical Specification
Frequency Range 1,850~1990㎒
8/20㎲
Surge Attester
±20㎄
Impedance 50Ω
Mechanical Specification
Environmental Specification
Operating Temperature -35~+65℃
www.kmwcomm.com
KMW Communications
www.kmwcomm.com
KMW Communications
Electrical Specification
Frequency Range 1710~2170㎒
8/20㎲
Surge Attester
±20㎄
Impedance 50Ω
Mechanical Specification
Environmental Specification
www.kmwcomm.com
KMW Communications
Bias-T: KASCTR182039
www.kmwcomm.com
KMW Communications
Bias-T: KASCTR182040
Electrical Specification
Frequency Range 1,710~2,170㎒
8/20㎲
Surge Attester
±20㎄
Impedance 50Ω
Mechanical Specification
BTS 7/16 DIN(F)
Connector ANT 7/16 DIN(M)
DC SMA(F)
Environmental Specification
Operating Temperature -35~+65℃
www.kmwcomm.com
KMW Communications
Bias-T: KASCTR182040
www.kmwcomm.com
KMW Communications
Block Diagram
ANT
RF signal
OOK signal
RS485/OOK
RS485 signal
Modem
DC signal
BTS RET
Electrical Specification
No. Item Specification Remarks
1 Frequency Range 2496 ~ 2690MHz
BTS Port → RET Port When the current is 2.3A, the voltage
5 DC Path voltage loss ≤1.2V
loss is ≤1.2V.
2.0dB, max
6 RF Signal Path Loss BTS Port → RET Port
@2.176MHz+/-400KHz
0.2dB, max
8 RF Signal Path Loss BTS Port → ANT Port
@2496 ~ 2690MHz
≥2.0dB @30~150MHz ANT Port → RET Port and BTS → RET Port.
9 RF signal Isolation The open port is terminated with 50oHm during the all
≥10.0dB @150~800MHz
measurement.
≥10.0dB @3000~12750MHz
www.kmwcomm.com
KMW Communications
Environmental Specification
Item Specification Remarks
Weather Protection IP 65
Mechanical Specification
No. Parameter Spec Comment
Drawing
www.kmwcomm.com
KMW Communications
Block Diagram
BTS
RF signal
OOK signal
RS485/OO
RS485 signal
KModem
DC signal
ANT RET
Electrical Specification
No. Item Specification Remarks
1 Frequency Range 2496 ~ 2690MHz
ANT Port → RET Port When the current is 2.3A, the voltage
5 DC Path voltage loss ≤1.2V
loss is ≤1.2V.
2.0dB, max
6 RF Signal Path Loss ANT Port → RET Port
@2.176MHz+/-400KHz
0.2dB, max
8 RF Signal Path Loss ANT Port → BTS Port
@2496 ~ 2690MHz
≥2.0dB @30~150MHz BTS Port → RET Port and ANT → RET Port.
9 RF signal Isolation The open port is terminated with 50oHm during the all
≥10.0dB @150~800MHz
measurement.
≥10.0dB @3000~12750MHz
www.kmwcomm.com
KMW Communications
Environmental Specification
Item Specification Remarks
Weather Protection IP 65
Mechanical Specification
No. Parameter Spec Comment
Drawing
www.kmwcomm.com
KMW Communications
P/N: KASCTPR82002
Block Diagram
ANT
RF signal
OOK signal
RS485 signal
RS485/OOK DC signal
MODEM
BTS RET
Electric Specification
Electrical Specification
No. Item Specification Remarks
5 DC Path voltage loss ≤1.2V ANT Port → RET Port When the current is 2.3A, the voltage
loss is ≤1.2V.
@2.176MHz+/-400KHz
7 RF Signal Path / R/L 23dB, min@696 ~ 2170㎒ ANT Port → BTS Port
9 RF signal Isolation ≥2.0dB @30~150MHz BTS Port → RET Port and ANT → RET Port.
≥10.0dB @150~800MHz The open port is terminated with 50oHm during the all
www.kmwcomm.com
KMW Communications
Environment Specification
Item Specification Remarks
Weather Protection IP 65
Mechanical Specification
NO Parameter Spec Comment
3 Weight 600 g
Drawing
www.kmwcomm.com
KMW Communications
P/N: KASCTPR82003
Block Diagram
ANT
RF signal
OOK signal
RS485 signal
RS485/OOK DC signal
MODEM
BTS RET
Electric Specification
Electrical Specification
No. Item Specification Remarks
5 DC Path voltage loss ≤1.2V ANT Port → RET Port When the current is 2.3A, the voltage
loss is ≤1.2V.
@2.176MHz+/-400KHz
7 RF Signal Path / R/L 23dB, min@696 ~ 2170㎒ ANT Port → BTS Port
9 RF signal Isolation ≥2.0dB @30~150MHz BTS Port → RET Port and ANT → RET Port.
≥10.0dB @150~800MHz The open port is terminated with 50oHm during the all
www.kmwcomm.com
KMW Communications
Environment Specification
Item Specification Remarks
Weather Protection IP 65
Mechanical Specification
NO Parameter Spec Comment
3 Weight 600 g
Drawing
www.kmwcomm.com
KMW Communications
P/N: KASCTPR82004
Block Diagram
ANT
RF signal
OOK signal
RS485 signal
RS485/OOK DC signal
MODEM
BTS RET
Electrical Specification
No. Item Specification Remarks
5 DC Path voltage loss ≤1.2V ANT Port → RET Port When the current is 2.3A, the voltage
loss is ≤1.2V.
@2.176MHz+/-400KHz
7 RF Signal Path / R/L 23dB, min@696 ~ 2170㎒ ANT Port → BTS Port
9 RF signal Isolation ≥2.0dB @30~150MHz BTS Port → RET Port and ANT → RET Port.
≥10.0dB @150~800MHz The open port is terminated with 50oHm during the all
www.kmwcomm.com
KMW Communications
Environment Specification
Item Specification Remarks
Weather Protection IP 65
Mechanical Specification
NO Parameter Spec Comment
3 Weight 600 g
Drawing
www.kmwcomm.com
KMW Communications
P/N: KASCTPR82005
Block Diagram
ANT
RF signal
OOK signal
RS485 signal
RS485/OOK DC signal
MODEM
BTS RET
Electrical Specification
No. Item Specification Remarks
5 DC Path voltage loss ≤1.2V ANT Port → RET Port When the current is 2.3A, the voltage
loss is ≤1.2V.
@2.176MHz+/-400KHz
7 RF Signal Path / R/L 23dB, min@696 ~ 2170㎒ ANT Port → BTS Port
9 RF signal Isolation ≥2.0dB @30~150MHz BTS Port → RET Port and ANT → RET Port.
≥10.0dB @150~800MHz The open port is terminated with 50oHm during the all
www.kmwcomm.com
KMW Communications
Environment Specification
Item Specification Remarks
Weather Protection IP 65
Mechanical Specification
NO Parameter Spec Comment
3 Weight 600 g
Drawing
www.kmwcomm.com
KMW Communications
P/N: KASCTPR82006
Block Diagram
ANT
RF signal
OOK signal
RS485 signal
RS485/OOK DC signal
MODEM
BTS RET
Electrical Specification
No. Item Specification Remarks
5 DC Path voltage loss ≤1.2V ANT Port → RET Port When the current is 2.3A, the voltage
loss is ≤1.2V.
@2.176MHz+/-400KHz
7 RF Signal Path / R/L 23dB, min@696 ~ 2170㎒ ANT Port → BTS Port
9 RF signal Isolation ≥2.0dB @30~150MHz BTS Port → RET Port and ANT → RET Port.
≥10.0dB @150~800MHz The open port is terminated with 50oHm during the all
www.kmwcomm.com
KMW Communications
Environment Specification
Item Specification Remarks
Weather Protection IP 65
Mechanical Specification
NO Parameter Spec Comment
3 Weight 600 g
Drawing
www.kmwcomm.com
KMW Communications
P/N: KASCTPR82007
Block Diagram
ANT
RF signal
OOK signal
RS485 signal
RS485/OOK DC signal
MODEM
BTS RET
Electrical Specification
No. Item Specification Remarks
5 DC Path voltage loss ≤1.2V ANT Port → RET Port When the current is 2.3A, the voltage
loss is ≤1.2V.
@2.176MHz+/-400KHz
7 RF Signal Path / R/L 23dB, min@696 ~ 2170㎒ ANT Port → BTS Port
9 RF signal Isolation ≥2.0dB @30~150MHz BTS Port → RET Port and ANT → RET Port.
≥10.0dB @150~800MHz The open port is terminated with 50oHm during the all
www.kmwcomm.com
KMW Communications
Environment Specification
Item Specification Remarks
Weather Protection IP 65
Mechanical Specification
NO Parameter Spec Comment
3 Weight 600 g
Drawing
www.kmwcomm.com
KMW Communications
Electrical Specification
Rechargeable Battery 11.1V(3.7V 3Cell), 1.5AH, Li-Polymer
Input Voltage
External Power 19V, 3.68A, AC/DC SMPS Adaptor
1 RS-485B
6 RS-485A
5, 9 Vdc(DC +15V)
4, 8 DC GND
3 RS-485GND
Environmental Specification
Operating Temperature 32 ∼ 104 F
Operating Humidity 10% ~ 75% RH
Storage Temperature -4 ∼ 158 F
Mechanical Specification
Physical Dimension 5.07 x 8.42 x 1.85 inch
www.kmwcomm.com
KMW Communications
www.kmwcomm.com
KMW Communications
Electrical Specification
Rechargeable Battery 11.1V(3.7V 3Cell), 1.5AH, Li-Polymer
Input Voltage
AC/DC Adaptor 19V, 3.75A(MAX)
1 RS-485B
6 RS-485A
5, 9 Vdc(DC +15V)
4, 8 DC GND
3 RS-485GND
Environmental Specification
Operating Temperature 32 ∼ 104 F
Operating Humidity 10% ~ 75% RH
Storage Temperature -4 ∼ 158 F
Mechanical Specification
www.kmwcomm.com
KMW Communications
(3) RS-485
(1) RS-232 Port Port
PAC-A
(4)Shoulder
strap clamp
www.kmwcomm.com
KMW Communications
Electrical Specification
Power supply DC
Mechanical Specification
Dimension (H x W x D) 1U (EIA standard) x 482mm x 320mm
Weight ≤ 10Kg (MAX)
Environmental Specification
Operating Temperature
Operating Temperature -10℃ ~ 70℃ -10℃ ~ 70℃
HumidityHumidity 5% ~ 95% 5% ~ 95%
Storage Storage
Temperature
Temperature -40℃ ~ 80℃ -40℃ ~ 80℃
RS-232 RS-232 Support a debug port Support a debug port
www.kmwcomm.com
KMW Communications
AICM Drawing
www.kmwcomm.com
KMW Communications
Electrical Specification
Input voltage range DC: -48V (-36V~-72V)
www.kmwcomm.com
KMW Communications
EMC Specification
PORT PROTECT MODE
ESD Specification
IEC 61000-4-2 , LEVEL 4 (Transient / BURST)
EMI Specification
IEC 61000-4-6 , (Emission) CLASS A
www.kmwcomm.com
KMW Communications
1
2 3 4 5 6
www.kmwcomm.com
KMW Communications
Mechanical Specification
Up kit 7.3lbs [3.3kg]
Weight
Down kit 3.8lbs [1.7kg]
Wind load Front / Rear Direction 330lbs [150kgf]
(max.) Side Direction 176lbs [80kgf]
Material Stainless Steel
Pole Diameter Ǿ1.96~3.14inch [Ǿ 50~80mm]
Packing Size, W x L x H 10.6 x 15.7 x 0.4 inch
Shipping weight 12.4lbs(5.6kg)
Upper kit
Down kit
www.kmwcomm.com
KMW Communications
Recommended
Recommended Torque
Torque
120kgf.cm
120kgf.cm
Recommended Torque
(M8,
(M8, 13mm
13mm Spanner)
Spanner)
240kgf.cm
(M10, 17mm Spanner)
www.kmwcomm.com