You are on page 1of 5

MATERIAL SAFETY DATA SHEET

IDENTITY (As used on label and list) : PAN-45


SECTION 1. Chemical Product & Company Identification
Manufacture's Name : HWA TAI INDUSTRY CO., LTD.
Address : 582 Moo 4 Bangpoo Industrial Estate Soi 13
Sukhumvit Rd., Tambol Praksa, Amphur Muang,
Samutprakarn. 10280 THAILAND
Tel & Fax : 0-23936688 & 0-23961996
Date prepare : March 16, 2018
SECTION 2. Composition/Information On Ingredients
Component wt% CAS Registry No.
Preparations of cationic surfactants - -
Hazardous Ingredients (s) wt% CAS Registry No.
None hazardous ingredients

SECTION 3. Hazardous Ingredients/Identity Information


Hazards : None
Classification system : The classification is in line with current EC lists. It is
expanded however, by information from technical
literature and by information furnished by supplier
companies.
Pictograms

SECTION 4. First Aid Measures


Eyes. : Immediately flush with water for 15 minutes.
Skin : No first aid should be needed.
Inhalation. : Remove to fresh air. Get medical attention if ill effects persist.
Ingestion. : Get medical attention.
Comments. : Treat according to person’s condition and specifics of exposure.

1
SECTION 5. Fire Fighting Measures
Extinguishing Media : On large fires use dry chemical, foam or water spray.
On small fires use carbon dioxide (CO2), dry chemical or
water spray. Water can be used to cool fire exposed containers.
Special Fire Fighting Procedures and Equipment : Determine the need to evacuate or
isolate the area according to your local emergency plan.
Hazardous Combustion Products : Carbon oxides and traces of incompletely
burned carbon compounds.
Unsuitable Extinguishing Media : None established

SECTION 6. Accidental Releases Measures


Personal Precautions : Avoid skin and eye contact. Do not breathe mist.
Keep container closed. Do not take internally.
Environmental Precautions : Prevent from spreading or entering into drains,
ditches or rivers by using sand ,earth or other.
Methods for Cleaning up :
Determine whether to evacuate or isolate the area according to your local
emergency plan. Observe all personal protective equipment recommendations described
in this MSDS. If diked material can be pumped, store recovered material in appropriate
container. Clean up remaining materials from spill with suitable absorbent. Clean area as
appropriate since spilled materials, even in small quantities, may present a slip hazard.
Final cleaning may require use of steam, solvents or detergents. Dispose of saturated
absorbent or cleaning materials appropriately, since spontaneous heating may occur.

SECTION 7. Handling And Storage


Handling : Keep container tightly closed and store in a cool, dry well-
ventilated location. Keep away from any area where the fire hazard
may be acute. Outside or detached storage is preferred.
Storage period : 12 months

2
SECTION 8. Exposure Controls/Personal Protection
Respiratory Protection : No personal respiratory protective equipment
normally required
Ventilation : As necessary to reduce/prevent control splashing and
aerosol generation.
Protective Gloves : Rubber / Polyethene
Eye Protection : Safety glasses/Mono-goggles
Other protective Equipment : No special requirements
Comments: Never eat, drink, or smoke in work areas. Practice good personal
hygiene after using this material, especially before eating, drinking, smoking, using the
toilet, or applying cosmetics.

SECTION 9. Physical And Chemical Properties


Appearance : Clear liquid
Main component : Preparations of cationic surfactants
Ionic : Cationic
pH : 8.0-10.0
Solubility : Readily soluble in water at room temp
Flash point : >100oC

SECTION 10. Stability And Reactivity


Condition to avoid : Avoid direct sunlight, high temperature and Heat, freezing
Stability : Stable towards light, heat and physical shock in normal handling
Incompatibility : None
Hazardous Decomposition product : No data.
Hazardous Polymerization : No data.

3
SECTION 11. Toxicological Information
Possible Health Effects:
Acute Eyes : Direct contact may cause mild irritation.
Skin : No significant irritation expected from a single short-term exposure.
Ingestion : Low ingestion hazard in normal use.
Inhalation : Irritates respiratory passages very slightly.
Chronic Skin : Repeated or prolonged exposure may cause irritation.
Ingestion : Repeated ingestion or swallowing large amounts may injure
internally.
Inhalation : No known applicable information
Sensitizing Effects: None Known
Mutagenic Effects: None Known
Reproductive Effects : None known
Carcinogenic Effects : None known
Other Health Hazard: None Known Applicable Information.
The above listed potential effects of overexposure are based on actual data, the
results of studies Performed upon similar compositions component data and/or expert
review of the products.

SECTION 12. Ecological Information


Environmental Fate and Distribution;
PAN-45 is removed from water by sedimentation or binding to sewage sludge
Environmental Effects : Under review
Bioaccumulation : No bioaccumulation potential.
Fate and effects in waste water treatment plants: No adverse effects on bacteria are
predicted.

4
SECTION 13. Disposal Considerations
If utilization or recycling of the product is not possible, it should disposed of
according to the local regulations and laws, e.g. by incineration in a suitable plant
Soiled, empty containers are to be treated in the same way as the contents.

SECTION 14. Transport Information


Declaration for land shipment : Not classified as Dangerous goods
Declaration for sea shipment : Not classified as Dangerous goods
Declaration for shipment by air : Not classified as Dangerous goods
Other information : Not dangerous cargo. Keep separated from foodstuffs

SECTION 15. Regulatory Information


No labelling is required in accordance with the EEC directives.
Not subject to the German Regulation on Flammable Liquids (VbF).

SECTION 16. Other Information


Main Use : Textile Chemicals
Prepared by : HWA TAI INDUSTRY CO., LTD.

These data are offered in good faith as typical values and not as a production
specification. No warranty, either expressed or implied, is made. The recommended
handling procedures are believed to be generally applicable. However, each user should
review these recommendations in the specific content of the intended use.

You might also like