a NAS i al : Dat
(LFC MODEL)
FNNLESS = DTORDESS = REDECERDESS—> ND ITHCILMMIONL JTRS G
SD NOMS NO NIBRVVION > ND POLLIIIDS (DICER
LOWDRLEP LOSS» WATER SMYING
FAIED -WOTDRED-REDUCER > VECHANCAL WATER REDURED
HAHNCS NFAT ERATION" POUT CONCERN
HGHORETLOSS~ HH HATER CONSINPTIONWAAWAAR EARL UREA UIT IN
LIANG CHI
INTERRATIONRE GROUP
DIMENSIONS & STANDARD SPECIFICATIONS
Deeecoe
I
PRPs]
LFC
MODEL NO. [COOLING CAPACITY, |
DIMENSIONS fan
WEIGHT ae)
LFC- Ke
@i[wit
H
Cc
DRY
[OPERATION|
25RT- 1208
[30RT- 1200
40RT- 1200
27
36
25 2
1480
1480
1480
1480 |
2080 |
2080,
3680
3980
3980
1700 |
1700
1700
380
500
500
780
970
970
50RT-240H
B0RT- 1208
7oRT-2408 63
45
54
72680
1480
2600
1480
3280
2080
‘3880
3880
4420
1700
1700
2140
20
770
850
1190
+1400
1770
Basse sao
jBoRT-2408 72
100RT-240H" 90
125RT-240H 192.5,
2680
2680
2600
2080 |
2680
3280 |
4420
2140
2140
2140
‘850
1000
1250
1770
2000
2500
150RT- 24087 195
175AT-240H 157.5
/200RT-240H 190
2680
2680
2680
‘3880
4480
5080
/225RT-240H 202.5
/250RT-480H 225
!300RT-480H" 270
[S50RT-480H 315
/400RT- 480 360
|450RT-480W 405,
/SOORT-4a0W 450
6O0RT-480W 540
700RT- 480¥ 630
feooRT-4g0W 720 |
}0oRT-aa0w 810
1000RT-480w 1000 | 900
182
202
243
282
324
354
405
486
587
68
re |
310 |
2680
5100
5100
‘5100
5100,
5100,
5100
5100
5100
5100
5100
5100
‘5680
3300
3800
‘4600
5100
5700
6300
7500
8700
‘9800 |
11100
12300
2240
2240
2240
2240
2880
2880
2880
2880
2880
3180
3180
3180
3180
3180
3180
1480
1650
1840
2040
27a0
3110,
3530
3880
4270
4310
5800
6400
7230
7960
8760
2860
3230
3570
3930
4900
5610
6380
7080
7810
8700
10610
12100
13610 |
15040
16520
+ The above cocling capacity is under the nominal temperatue condtcn ai 37°C et, 32°C oul, and wet bulb femgerature for
27°C, 28°C and 29°C,
@ above is te cooling capacity for wet bulb temperature al 27°C and tho minimum tower haad required, from hot water init
fre TIM for modal 1201, 12M for model 2404 and 13M for model 404.
@ above isthe coving capacity for wot bulb temperature at 28°C and the minimum tower head requted, from hot water inlet
‘ace 19M for mode! 120W. 14M for model 240W end 15M for modo! 40H
@ above is the cooing capacity for wet bulb temperature at 29°C and the minimum lower head required, trom het water il
ig 14M for modal 1200, 15M for mocel 240W and 16M for model 480.
+The flal pump heed includes the ftion lees of piping and heat exchanger, toner head required and he height ot C.
+ ¥ ype liters requ for Hot WatorIiet.
[Above specication and dimenciona aro gubjec to change without notice.
+The nominal water rate is datinad as 19 LPMURT for cooing tower.
+ Foundetion leveling required wn proceecing tne founcatien constuction.
LIANG CHI LFC OPERATION AND SERVICE MANUAL@ LANG. CHI LFC
RECOMMENDED CONCRETE FOUNDATION
LFC-25~60 —srenor nose 801700 aeptn
MODEL Ee
LF0-26-1200
ro armegoupel
LF0-30- 120"
LF0-40- 1208
Lr0-60-240"
LF0-60-1208
HOT WATER INLET DRECMON
LFC-70~225
char ate #903200 depth
MODEL | A
F0-70-240n, 1330
Fo- 90-2400 | 180)
trc-ton-240n| 1240
trc-125-20n | 0
trc-150-240n | 1940
tr-175-24ew [1200
HOT WATER INLET ORECTON
I cis sce co
MODEL |
| uFc-250-vaow | 1250 1250)
LFo-300-480M | 1350 1850)
1250 1250
0 1250
LFo-450- 0 1480
LFo-500-4a0w | 1250 1230
LFO-600-480¥ | 1350 |1900:2| 1850
LFG-700-480n | 1880 [180078] 1250)
LFO=B00-480¥ | 1260 19004) 1250
LF0-s00-400w | 7050) fo004] 50
LFc-1000-4a0n | 1460 fia00ss| 1250 | 12000
LIANG CHI LFC OPERATION AND SERVICE MANUAL
WAAWAAR EARL UREA UIT INWAAWAAR EARL UREA UIT IN
LIANG CHI
INTERRATIONRE GROUP
SUPERB LOW NOISE
Method of Measurement
(1) LEC tower's noise orientation meas:
Lurement is in compliance with Japan
Industry specication of 88609. (Tost
ing of cooling tower ventilation)
(2) The nonzontal distance trom air inlot
(casing) to the measuring point (1) is
equal fo the width or length of tower.
‘The height is 1.6 motors above the
‘round level. (Note: if the width or
length of tower is lass than 1.5 me-
ters, thon the mnimum distance of 1.5
meters is herein taken granted )
(9) The distance of 45 degree for measur
ing point (5) ic moasured from the
edge of the top with the width or
length of the tower. (Note: it ne wath
‘r length of the tower is less than 1.5
meters, then the minimum distance of
115 meters is herein taken grantec)
(4) The noise levels measured should not
be disturbed by ambient environemnt
(8) The noise levels of scale A should
be considered to be the measuring
stancards
(6) The noise should be recttied accord:
ing o the specification of Japan Indus-
try 28731
Sound
LFC
ea)
es
=
So
w
on
tae
rer
0
oe | ont
[cs
r0-e
ees
ae
20
wes) «so
|svssss| aso
re-o-200
50
sito
S985) ass
5.5 | 2.550
| we Tess mm [tere
5155.5 |50.580.587 5/595) 24/18
sass | 1918
sors | 1948
suee.s | 1.50
sis s| a0
xe=e-200
eo 208
cs
we |asios
i585 90.5515
wrsirs| 242
srsist | 2.4/9
re ono
con
0-208
50-20 co"
furc-zs-nor |
=
3.5005
Gucus
aves
eves
was |.i6te
sesis7 | sue
56167 | ue
B57) Sue
ir oes) su
e575 vse.
ws] bane
grass | 2ae2
pres | 2448
sess | 010
sos | 409.6
[rca
ro sor
758
5107.
‘a6
sees aes
575) so
lasses] «04.0
Issi565| «asa
eso or|
70-8
seo
ec 0900
wt sos | 100
ae Sees
S758 9.555
Ssse.5) 8/5
S706.5 9.6/5
51) 8.54
were | 4.8
|sesis | oe |
556 | ane
ses | saw
Sally auger lows sandra levels epostod by Japan Cooling Tone tire,
MEASURING DIRECTION W SIDE
MEASURING DIRECTION L SIDE
LIANG CHI LFC OPERATION AND SERVICE MANUALWAAWAAR EARL UREA UIT IN
LIANG CHI
LFC
COMPARISONS BETWEEN LFC COOLING TOWER AND FAN MOTOR TOWER
Type
tem
LFC Fanless Type
Fan Motor Type
Silent Design
Without fan motor, reducer and moving |
parts, noise level is lower than super
Tow noise type of cooling tower.
With fan motor, reducer, and me-
‘chanical transmission; higher noise
and vibration.
Cooling
Method
Exhausting is enforced by cooling wa-
ter ejection and mechanical driven
force is not required.
Cooling exhausting by fan, motor
and reducer.
Vibration
Vibration free; vibration isolating device
not required.
Higher vibration during operation: vie
bration proof measures required.
Drift Loss and
Dust Proof
Five-pass type ellminatoron the top of
tower is for sping air and liquid. Be-
sides dust proof, it keeps the drit loss
between 0.001% and 0.008% (depend
ing on ejection pressure); water loss is
90% less than that of traditional tower.
decreases the contagion of legionnaire
symptom.
Install no eliminator on the top so
dusts will enter easily; Reducing air
outlet renders big air volume and
causes larger drift loss. Pollution is
therefore present.
Cellular design is stable for the per-
formance. High resistance to corrosion
and water-wear makes long life cycle
possible. The inclusion of LFC tower in
the integral plan of building renders the
beauty of regularity,
Traditional type is designed with in-
dependent outline so it could not in-
tegrally regularize with building.
‘Consumption
of Power
Fan is not required but larger pump
head is neaded. Total power consump-
tion is less than traditional cooling
tower.
Fan is required but small pump
head is needed. The total power
consumed is higher.
Operation and
Maintenance
All the tower parts are of non-moving
parts and of anti-corrosive material. No.
consumable parts are needed and,
plus lower power consumption, so the
total cost is reduced.
The electric motor is required. The
consumable parts are needed, and
plus the high power, so the total
cost is higher.
PATENT STATUS
(1) REPUBLIC OF CHINA, TAIWAN ; PATENT NO. 117485
(2) MAINLAND CHINA
PATENT NO, 95238103.1
(3) UNITED STATES OF AMERICA . PATENT NO. 5639266
The patent registtatons in other countries are stil under processing.
LIANG CHI LFC OPERATION AND SERVICE MANUAL