Professional Documents
Culture Documents
Calypso F: General Medical Merate S.p.A
Calypso F: General Medical Merate S.p.A
General Medical Merate S.p.A. Infotec
www.gmmspa.com
CALYPSO F
DR multifunctional system
• Sliding column floor for X‐ray assembly, combined with exam table
and bucky stand
CALYPSO_F_Rev_D_EN.doc _2014‐11‐13 – data subject to change without notice 1/12
MAIN FEATURES
y Sliding column floor for X‐ray assembly, combined with exam ta‐
ble and bucky stand
y Adjustable exam table height with floating tabletop in four direc‐
tions
y Column rotation around vertical axis for lateral X‐ray examina‐
tions and tube rotation around horizontal axis
y Low absorption table top with maximum patient weight up to
250 kg
y Automatic collimation system with spectral filters optional
y Optional automatic reconstruction images device (stitching) cou‐
pled to automatic bucky stand only
2/12 CALYPSO_F_Rev_D_EN.doc_ 2014‐11‐13 – data subject to change without notice
INFOTEC
Calypso F is a smart and advanced equipment based on the following main
units:
y X‐ray column stand assembly
y Examination table with adjustable height
y Bucky stand
y Collimator (with different types of collimation)
Furthermore, a wide range of options and accessories are available to suit dif‐
ferent system configurations
MAIN APPLICATIONS
y Emergency
y General diagnostic
y Skeletal and thoracic diagnostic
CALYPSO_F_Rev_D_EN.doc _2014‐11‐13 – data subject to change without notice 3/12
TECHNICAL DESCRIPTION
Column x‐ray stand assembly
The X‐ray column stand assembly is based on innovative technology to perform radiological
examinations.
The unit is completed of devices for:
- Automatic alignment of the slave X‐ray source assembly with the detector bucky stand in
vertical position
- Maintenance of the pre‐set SID on the examination table
- Optional device for table detector automatic alignment with horizontal X‐ray source as‐
sembly both in AP and in oblique incidences
The electromagnetic brakes assure linear movements while the permanent magnet brake is
for rotation and vertical movement. There is a digital device for SID and incidence.
When chosen the optional stitching function, it is required a column stand assembly with
motorized inclination.
Examination table with adjustable height
The examination table has an adjustable height from 55 to 85 cm with motorized control.
Patient tabletop is floating in four directions:
76 cm in longitudinal direction with 220 cm tabletop length
96 cm with 240 cm carbon fibre tabletop length.
Tabletop transversal travel is of 26 cm.
The under‐table detector carriage is manually movable and can be automatically aligned to
the X‐ray column stand assembly. The X‐ray beam projections can be perpendicular (AP) or
with oblique incidences.
The grid is easily interchangeable for proper focalization selection and there is a device for
mounting the AEC chamber. The carbon fibre patient table top allows patients up to 250 kg
(with limitations).
The foot pedals control allow up/down motorized motion, and table top electromagnetic
brakes.
Bucky stand
The bucky stand allows movements of the detector with manual or vertical control, for a
travel of 150 cm.
The grid is easily interchangeable for a proper focalization selection and there is a device for
mounting the AEC chamber.
The brakes are electromagnetic negative polarized.
Additionally, in case it is chosen an X‐ray room with optional stitching function, it is required
a bucky stand with motorized vertical movement (option 5.1).
4/12 CALYPSO_F_Rev_D_EN.doc_ 2014‐11‐13 – data subject to change without notice
INFOTEC
Collimation system
The collimation system can be manual or automatic. In both cases, it is possible to choose a
collimator with filters.
The system has a square‐field X‐ray beam limiting system with automatic shutters positioned
according to the selected exposure area and SID.
Additionally, there is a variable filtration composed of three filters with automatic/manual
selection.
Field reduction and manual operation of the system can be performed by two knobs and a
set of pushbuttons placed on the front panel.
The front panel is completed of a digital display for visualization of X‐ray field dimension, SID
and additional filtration.
Optional automatic reconstruction images device (stitching)
Only with a motorized vertical bucky stand movement (optional bucky stand 5.1) it is possi‐
ble to couple an automatic device for the image reconstruction (stitching device ‐ option
11.1).
The device allows the execution of acquisitions in rapid sequence and subsequent recon‐
struction of the column or the lower body extremities with the aid of a combined digital sys‐
tem. This device allows the X‐ray column assembly clockwise and counter clockwise rotation
around the horizontal axis to allow the fully automated operations, function necessary for
the images reconstruction.
CALYPSO_F_Rev_D_EN.doc _2014‐11‐13 – data subject to change without notice 5/12
TECHNICAL FEATURES
X‐RAY COLUMN RADIATION SOURCE ASSEMBLY
Rail length 244 cm
Longitudinal travel 189
Rotation angle around vertical axis +/‐ 90°
Rotation unlocking device food pedal
Rotation positions in evidence every 90°
Minimum radiation source assembly focus/floor distance 53,5 cm
Vertical travel 140 cm
Balancing technique counterweights
Rotation angle around horizontal axis +/‐180°
Weight 200 Kg
CONTROL PANEL
Source assembly control panel Integrated and ergonomic
Tube stand brakes control push buttons
Table top up/down remote control push buttons
X‐ray beam incidence indicator digital
Focus‐film distance indicator digital
EXAMINATION TABLE
standard: plastic laminate
Patient tabletop
optional: carbon fibre
plastic laminate: 0,9 mm Al eq
Absorption (EN 60 601‐2‐35)
carbon fiber: 0,5 mm Al eq
standard: 220x80 cm
Tabletop size
optional: 240x80 cm
76 cm with 220 cm length tabletop
Longitudinal travel
96 cm with 240 cm length tabletop
Transversal travel 26 cm (13 cm for each side)
Electromagnetic brakes control with pedal
Tabletop‐film distance 7 cm
Tabletop‐floor minimum distance 53.5 cm (with bucky)
55 cm (with digital device)
Tabletop height travel 32 cm
Speed of elevating movement 3 cm/s
Plastic laminate top: 150 kg
Patient max weight allowed
Carbon fibre top: 250 kg (with limitations)
Detector longitudinal carriage travel 54 cm
Detector carriage electromagnetic brakes control push button
Weight 300 Kg
6/12 CALYPSO_F_Rev_D_EN.doc_ 2014‐11‐13 – data subject to change without notice
INFOTEC
BUCKYSTAND
Movement type detector with vertical movement
Minimum distance from the detector to the floor 35 cm
Vertical travel 150 cm
Vertical movement/ braking Manual/ motorized electro permanent
Power supply single‐phase 230 Vac 50/60 Hz
Equipment total weight ~ 110 kg
CALYPSO_F_Rev_D_EN.doc _2014‐11‐13 – data subject to change without notice 7/12
TYPE DESCRIPTION CODE
Multifunctional Radiographic system with X‐ray column CALYPSO
CALYPSO F Assembly, adjustable height tabletop and bucky stand F/M
CONFIGURATION
Riference Description
*S 1_1 Manual collimator
1_2 Manual collimator with filters
1_3 Automatic collimator
1_4 Automatic collimator with filters
1_5 Manual collimator with laser centering
*S 2_1 Plastic laminate patient tabletop 220 cm
2_3 Carbon fibre patient tabletop 220 cm
2_4 Carbon fibre patient tabletop 240 cm
3_1 Motorized bucky movement
*S 4_1 Vertical detector stand
5_1 Vertical motorized bucky stand‐detector movement
6_1 Down movement safety
7_1 Up/down foot pedal remote control
11_1 Automatic stitching device
ACCESSORIES
Riference Description
*S Grid R12/L215/F120 Al (JPI)
*S Grid R12/L215/F180 Al (JPI)
Grid R12/L200/F110 for Wifi
Grid R12/L200/F130 for Wifi
Grid R12/L200/F180 for Wifi
Measure chamber 46x46 cm
Measure chamber 46x46 cm (GXX0C)
Arm support for TRN 430
Patient vertical positioner
Compression belt
Hand grips
Orientable lateral cassette holder 18x24
Lateral cassette holder 35x43cm
Legs support
*S: Standard (typical configuration)
8/12 CALYPSO_F_Rev_D_EN.doc_ 2014‐11‐13 – data subject to change without notice
INFOTEC
CALYPSO_F_Rev_D_EN.doc _2014‐11‐13 – data subject to change without notice 9/12
10/12 CALYPSO_F_Rev_D_EN.doc_ 2014‐11‐13 – data subject to change without notice
INFOTEC
CALYPSO_F_Rev_D_EN.doc _2014‐11‐13 – data subject to change without notice 11/12
GENERAL MEDICAL MERATE S.p.A.
Via Partigiani, 25 ‐ 24068 Seriate (BG) ITALIA
tel (0039) 035 4525311 ‐ fax (0039) 035 297787
http: www.gmmspa.com e‐mail: info@gmmspa.com
In compliance with the essential requirements of MEDICAL DEVICES DIRECTIVE 93/42EEC and supple‐
ments
Conforme ai requisiti essenziali della DIRETTIVA DISPOSITIVI MEDICI 93/42CEE e sue integrazioni
12/12 CALYPSO_F_Rev_D_EN.doc_ 2014‐11‐13 – data subject to change without notice