Professional Documents
Culture Documents
This guide is for the Snowball (50 TB or 80 TB of storage space). If you are looking for documentation for
the Snowball Edge, see the AWS Snowball Edge Developer Guide
(https://docs.aws.amazon.com/snowball/latest/developer-guide/whatisedge.html) .
Remove the cables from the cable catch, and plug the Snowball into power. Each Snowball has been engineered to
support data transfer over RJ45, SFP+ copper, or SFP+ optical 10 gigabit Ethernet. For SFP+ optical, you'll have to
use your own cable, connected to the SFP+ optical adapter in one of the SFP+ ports. For more information on cables
and ports, see Supported Network Hardware (./specifications.html#network-hardware) . Choose a networking option,
and plug the Snowball into your network. Power on the Snowball by pressing the power button above the E Ink
display.
2. Attach the power cable to the back of the Snowball, and then plug it in to a reliable source of power. Then press
the power button, located above the E Ink display, and wait for the E Ink display to read Ready.
3. When the Snowball is ready, the E Ink display shows the following screen.
We use cookies and similar tools to enhance your experience, provide our services, deliver relevant
advertising, and make improvements. Approved third parties also use these tools to help us deliver
advertising and provide certain site features.
Customize
Accept all
https://docs.aws.amazon.com/snowball/latest/ug/getting-started-connect.html 1/2
3/31/2021 Connect the AWS Snowball device to Your Local Network - AWS Snowball
At this point, you can change the default network settings through the E Ink display by choosing Network. To
learn more about specifying network settings for the Snowball, see Changing Your IP Address (./using-
device.html#snowballnetwork) .
Make a note of the IP address shown, because you'll need it to configure the Snowball client.
Important
To prevent corrupting your data, do not disconnect the Snowball or change its network settings while transferring
data.
We use cookies and similar tools to enhance your experience, provide our services, deliver relevant
advertising, and make improvements. Approved third parties also use these tools to help us deliver
advertising and provide certain site features.
Customize
Accept all
https://docs.aws.amazon.com/snowball/latest/ug/getting-started-connect.html 2/2