Professional Documents
Culture Documents
Church of The Transfiguration: Assembly Instructions: Russia
Church of The Transfiguration: Assembly Instructions: Russia
Front Back
Side Side
The Church of the Transfiguration is one of the wooden churches located on Kizhi, an
island on Lake Onega, north east of Saint Petersburg. The church is made entirely from Parts sheet (Pattern) : Twenty Eight A4 sheets
wood but does not use a single nail, and is 37 meters high with 22 onion-shaped domes, Assembly Instructions : Ten A4 sheets
giving it a very distinctive and fairytale-like appearance. It is believed that the basic No. of Parts : 224 parts
foundation for the church was completed in the 16th century, but this was destroyed in a * Build the model by carefully reading the Assembly Instructions, in the parts sheet page order.
fire from a lightning strike, and the church was rebuilt in 1714. The wooden churches of Write down the number on the back of each part as you cut them out.
Kizhi, including this Church of the Transfiguration, were registered as a UNESCO World Since many of the parts are complicated and very small, do a trial assembly before actually
Heritage Site in 1990. Handy Hint attaching them together.
The finished piece will look more realistic if you paint the edges of the parts with colors similar
*This model was designed for Papercraft and may differ from the original in some respects. to the parts.
PAGE01
Russia Church of the Transfiguration : Assembly Instructions
PAGE02
Russia Church of the Transfiguration : Assembly Instructions
PAGE03
Russia Church of the Transfiguration : Assembly Instructions
PAGE04
Russia Church of the Transfiguration : Assembly Instructions
PAGE05
Russia Church of the Transfiguration : Assembly Instructions
PAGE06
Russia Church of the Transfiguration : Assembly Instructions
PAGE07
Russia Church of the Transfiguration : Assembly Instructions
PAGE08
Russia Church of the Transfiguration : Assembly Instructions
PAGE09
Russia Church of the Transfiguration : Assembly Instructions
PAGE10