Professional Documents
Culture Documents
History of Revision
Version Date Page Item Description Remark
V1.0 2019/10/29 All All Preliminary
V1.1 2019/10/30 3 Audio Codec Realtek ALC256 modify
3 LCD 14.1” TN,1366 x 768(Anti-Glare) (TBC) add
System Status
4 Battery Low (under 10%) add
Indication
Frequency response from ≤ 350 up to ≥
4 Speaker add
16kHz
4 System BIOS AMI Support ACPI 5.0(above) add
4 Measurements Dimension:327mm x225mm x17.9mm modify
WIFI/on ; BT/off ; backlight 40% ;
4 Battery Life add
volume 50%
Intel® CML-U V2 6+2 (4+2 design
V1.2 2019/11/06 3 SOC compliance) support modify
CPU supports V-pro and non-V-pro (AVL)
3 LCD 14.1” TN/IPS,1920 x1080(Anti-Glare) modify
290mm, with 5.4mm height with track point
3 KB del
support (optional);
3 TP 200c.c. water spill resistance (for 5mins) add
3 SSD PCBA different del
4 I/O ports With Kensington Lock support add
WIFI/on ; BT/off ; backlight 40% ;
4 Battery Life del
volume 50%
5 ID/Finishing Items add
V1.3 2019/11/15 3 LCD (TBC) del
Pointing Device Above Touchpad buttons support (scissor
3 add
(Touch Pad) structure switch type)
4 I/O ports TypeC behaviors modify
System Status
4 LEDs color add
Indication
Dimension:327mm x227mm x17.9mm
4 Measurements (w/o rubber foot) modify
allowed to be applied.
65W PD type-C adapter, 20V
AC-Adapter
V2.5 2020/2/24 3 Notice: Under 15V/45W adapter is NOT modify
-->PD-Adapter
allowed to be applied.
V2.6 2020/3/3 3 I/O Ports USB 3.1USB 3.2 modify
V3.0 2020/3/3 ALL DVT phase
V4.0 2020/07 ALL PVT phase
USB 3.2 Gen2 Type-C Supports Always
V4.1 2020/09 3 I/O Ports modify
On Always ON(in DC-mode)
V4.2 2020/09 2 LAN Remove I225LM-w/ vPro SPEC Remove
2
新產品規格書
精英電腦股份有限公司 New Product Specification
Pages:
PROGRAM CODE: (CF40CM) 3 of 5
3
新產品規格書
精英電腦股份有限公司 New Product Specification
Pages:
PROGRAM CODE: (CF40CM) 4 of 5
4
新產品規格書
精英電腦股份有限公司 New Product Specification
Pages:
PROGRAM CODE: (CF40CM) 5 of 5
Validation MIL-STD-810G Drop, Method 516.7 Procedure IV, 30inches height with 2inches plywood
ground
Functional Shock. Method 516.7 Procedure I
Vibration, Method 514.7 Procedure I, Category 4 and 24)
Blowing Dust, Method 510.6 Procedure I
Humidity, Method 507.6 Procedure II
Altitude, Method 500.6 Procedures I & II
Sand, Method 510.6 Procedure II
Freeze/Thaw, Method 524.1 Procedure III
ID/Finishing LCD opening, max. in 180 degree
A cover, PC+ABS frame + AL metal with anodic treatment (color to follow
CMF)
B cover, AL metal mylar (color to follow CMF)
C cover, PC+ABS (color to follow CMF)
D cover, PC+ABS frame + AL metal with anodic treatment (color to follow
CMF)
Logos definition (per customer request)