Professional Documents
Culture Documents
Ref.nr: DSSPL/Vapi/Feb/2020
To, Date:-30/03/2021
M/S Calibre Chemicals Pvt Ltd.
Sarigam,
Subject: Requirement of Oil Injected Screw Compressor Model CPVR 20 TMD for 23-79
CFM at 10 Bar
Dear Sir,
We are pleased to receive your valuable enquiry and obliged for the interest shown in
our product. Based on your requirement, we are pleased to offer our Following
Compressor model as below:
We Hope you will find the above in line with your requirement.
Thanking you and assuring you of our best of attention & services at all the times.
Amlan Mukherjee
Compressor:
One Single Stage, Rotary Screw Element Complete With,
Dry Paper Type Suction Air Filter With Silencer
Conveniently Located For Easy Replacement Of Filter Element
Unloader With Integrated Regulating Valve For Load/Unload Control
System
Simple Design With Only One Moving Part, Needs No Regular
Adjustments
Three-Way Solenoid Valve Required For Load/Unload Regulation Of The
Compressor
Air / Oil Temperature Switch / Gauge.
Air Oil Temperature at Element Outlet and To Shut down The
Compressor In Case Of Too High Element Outlet Air Temperature.
2
Date: 30/03/2021
Ref.nr: DSSPL/Vapi/Feb/2020
- Multi-logic Control
- Multi-mode Control (Local / Remote / LAN)
- Intelligent Shutdown Protection
- Pre- Warning Indication
- Automatic restart after voltage failure
Keys
- Start
- Stop
- Cancel
- Validate
- Navigation(4 Keys)
Luminous Indication
- Power Supply Indication
- Automatic Function Mode
- Service Indication
- Warning
(LCD Display)
- Operational status at a given instance
- Maintenance Messages (Alarms & Faults)
- Setting Parameters of the Compressor
Compressor Warning & Shutdown Indications
- Emergency Stop
- Element Outlet Temperature
- Main Motor Overload
- Fan Motor Overload
- Phase Sequence
- Reverse Rotation
- General Faults Indication
The ES4000 Compressor Management Software Allows Considerable
Reduction in Electricity Consumption
New Controller is more efficient - it keeps track of the time since the last
stop occurred (Intelligent Unload Cycles)
The result is that the machine can simply stop rather than unload,
eliminating several minutes of unloaded running.
Extra Advantage
- Controller unloads rather than stops the machine if the pressure is
dropping fast.
- Controller can predict the time until the minimum pressure limit is
reached once the machine has stopped.
4
Date: 30/03/2021
Ref.nr: DSSPL/Vapi/Feb/2020
5
Date: 30/03/2021
Ref.nr: DSSPL/Vapi/Feb/2020
Range CPVR
Description
For Chicago Pneumatic, it isn't just about products. We value our end users' and
distributors' performance and do our ultimate best to make it easy to work with our
people while providing reliable products with a passion.
6
Date: 30/03/2021
Ref.nr: DSSPL/Vapi/Feb/2020
7
Date: 30/03/2021
Ref.nr: DSSPL/Vapi/Feb/2020
ACTIVTED
CARBON
FILTER
(0.005 ppm /
0.005 mg/mc) to
remove oil
(odours& vapors)
for applications
where very low oil
content is
required.
8
Date: 30/03/2021
Ref.nr: DSSPL/Vapi/Feb/2020
9
Date: 30/03/2021
Ref.nr: DSSPL/Vapi/Feb/2020
Main drive (TEFC) motor driving the Powerful efficiency for the
most efficient compressor element Lowest energy consumption.
Resistant to the harshest
Atmospheric contaminants.
All India well spread Sales & Service Customer satisfaction with timely
Network response on service requirement
and spares availability
10
Date: 30/03/2021
Ref.nr: DSSPL/Vapi/Feb/2020
Price Bid:-Compressor
Option:-1 Air compressor
DISCOUNT@30%
RS 3,09,000/-
o GST: GST will be applicable based on billing address of customer. Tax rates will be
determined on HSN (Harmonized System Nomenclature) code of goods. For
Services, SAC (Service Accounting Code) and nature of services will be used to
determine tax rate.
Packing & Forwarding: This will be charged extra and amount must be agreed @ 3
% (i.e. 2% packing and 1 % forwarding which is taxable).
o Transit Insurance: Transit Insurance is in scope of Purchaser, you need to provide:
• Transit Insurance Co. name
• Policy no.
• Validity period
DELIVERY: Delivery quoted in good faith, & while every endeavor will be made to
maintain the same, we do not agree to pay any penalty or liquidated damages or
cancellation of order and purchase of the equipment at our risk & cost elsewhere.
Deliveries are subject to FORCE MAJEURE conditions.
TERMS OF PAYMENTS:
11
Date: 30/03/2021
Ref.nr: DSSPL/Vapi/Feb/2020
30% advance along with the order and balance against, pro-forma invoice prior to
dispatch.
WARRANTY in INDIA:
CP warrants that the equipment supplied will be free from functional defects in materials
and / or workmanship for a period of 18 months from the date of dispatch or 12
months from date of commissioning whichever is earlier. Our liability under this
warranty is expressly limited to repairing or replacing, at our option, any components /
parts, which upon our inspection, are found to be defective. This warranty does not
cover normal wear & tear and / or any damage that may be caused due to misused /
mishandling and /or negligence in operation and/or maintenance.
If machine is installed outside India, we need to charge visit charges extra, 350
USD per day per person per compressor as per our company's policy. Further,
expenses like Visa charges, To and fro air travel tickets, local travel in Site
Location, lodging and boarding, food etc. on buyer’s account.
INSPECTION & TESTING OF EQUIPMENT: Each equipment is tested in the plant prior
to dispatch as per BS: 1571 Part –II for capacity, pressure & power etc.
However customer wish to witness for mechanical run test & performance test at
our works prior to dispatch will be charged @ Rs. 10,000.00 per machine. Test
Sheet records for above performance test shall be furnished certifying the
capacity of the equipment. For bought in items manufacturers test certificate
shall be submitted. Thirty party inspection charges will be borne by purchaser.
12
Date: 30/03/2021
Ref.nr: DSSPL/Vapi/Feb/2020
If Erection and commissioning of compressor is outside India then the same is charged
at 350 USD per day per person per compressor. Further, To and Fro Air Fare, Lodging
and boarding, food, Visa Expenses shall be in Client's scope.
VALIDITY: We reserve the right to invoice at prices ruling at the time of supply. Subject
to this stipulation our offer is kept open for your acceptance for a period of 30 days from
the date of this offer.
Amlan Mukherjee
13