Professional Documents
Culture Documents
Maintenance-free and no
wear due to high level dry
run properties
Low weight
Design/Function Applications
Type 5470 EExi includes high switch The extendable type 5470 EExi can
Applications:
reliable diaphragm seat valves be used for block modules or for
• Chemical industry
as 3/2- and 4/2-way version. The entire valve blocks (tag connectors
• Pharmaceutical processing
valve consists of three modules, on top, coil spacing 19 mm).
equipment
valve body with servo-diaphragm,
• Industrial waster water
plungers and seat seals as well as The block assembly is made with
treatment
numerous connection possibilities pneumatic modules type MP05
• Oil and gas industry
for the service ports 2 and 4. through integrated lock technology
and screwing.
The body and valve internal parts
are made of high quality Type 5470 NAMUR EExi can be
thermoplastic, the return spring is easily mounted to a process valve
made of stainless steel. with the same interface.
www.burkert-contromatic.com Page 1 / 6
Multi-Way Valves for Process Actuation Type 5470
servo-assisted, extendable, 18 mm wide
Circuit functions
4
14
C 3/2-way valve, 10 G 4/2-way valve,
when de-energized, when de-energized,
outlet port exhausted pressure inlet port 1 connected
to outlet port 2,
outlet port 4 exhausted
Specifications
Circuit Orifice Flow rate 1) Pressure Power Response times Port connections
function Q Nn -Value (air) range 2) consump. opening 3) closing 3)
[mm] [l/min] [bar] [W] [ms] [ms]
C (3/2) 4.0 300 2–8 0.5 60 50 Supply port 1 & 3: plug-in coupling ø 6 mm in front or downwards
Service port 2 & 4: sub-base or NAMUR flange
G (4/2) 4.0 300 2–8 0.5 60 50 Supply port 1 & 3: plug-in coupling ø 6 mm or threaded port G 1/8
Service port 2 & 4: sub-base or NAMUR flange
1)
Measured with 6 bar upstream pressure and 1 bar pressure drop across the valve and at +20 °C.
2)
All pressures quoted are gauge pressures with respect to the prevailing atmospheric pressure.
3)
Measured at connection 2; time from electrical switching to pressure increase to 90 % (opening)
or pressure drop to 10 % (closing) of operational pressure of 6 bar.
Page 2 / 6
Multi-Way Valves for Process Actuation Type 5470
servo-assisted, extendable, 18 mm wide
Block and Wall Mounting with Pneumatic Modules Type MP05 [mm]
49.6
Connector Module Connector Module
15.5 left left
122
3 3
122
22
3
2
44
26.5
1 1
1
44
38
4
26
15 18 18
3
9.5
18 L = 2x18 + nx18
18 n = Number of Modules
11.8
14 41
38
38
G 1/8, NPT 1/8
15
15
15
48.5 45 47.8
Screwed tube connector Threaded port G 1/8 in front Plug-in coupling ø 6 mm in front
SL 6/4 mm in front
Page 3 / 6
Multi-Way Valves for Process Actuation Type 5470
servo-assisted, extendable, 18 mm wide
NAMUR
49.6
15.5
152
122
M5
3 2
24
1
44
29.5
4
26
5 18 32
18 48
25 87
Ex-Version
Connector module Basic module Interface module: Supply ports pushed through
- left - - 3 valve space - for additional pressure supply
or
Supply ports
3(R), 1(P)
Page 4 / 6
Multi-Way Valves for Process Actuation Type 5470
servo-assisted, extendable, 18 mm wide
Scope of delivery: All valves with manual override and with NBR seal; tag connectors on top acc. to DIN 43 650 C;
without cable plug (see accessories)
NAMUR versions
Circuit Orifice Flow rate Supply port connection Service port connection Pressure Item-No.
function QNn-Value 1 and 3 2 and 4 range
(air)
Page 5 / 6
Multi-Way Valves for Process Actuation Type 5470
servo-assisted, extendable, 18 mm wide
1)
With these accessories, only a minimum of possible cable plugs with circuit are being mentioned. For other versions see data sheet type 2506.
A flat seal and a fixing screw are part of the delivery scope of a cable plug.
Attention!
Pay attention to a
correct fit of the
flat seal when
mounting the
Flat seal cable plug!
Cable plug type 2506 (pin assignment acc. to DIN 43650, Form C)
Page 6 / 6