Professional Documents
Culture Documents
14
14
15 15
Dear Friends and Partners,
Yours sincerely,
Daniel Hager
CEO Hager Group
1
2
The partner for smart
solutions you can trust
Hager is a full-range supplier of electrical installation systems for building, residential and commercial
properties. For decades, Hager has been synonymous with an extensive and complete offering. Highest
quality, cutting-edge products, modularity, ease of installation, ease of use, excellent service and
sophisticated design are the features that distinguish Hager.
Hager the supplier for professionals – is a synonym for top quality and innovative technology, as well as good customer
relations and reliability. All of which make Hager the partner for smart solutions, you can trust.
www.hager.com
3
stylea
system 10088
system 8000
system 9088
Stainless steel
Metal clad
Technical information
4
switches l dimmer & fan controller l double pole
accessories
control l special marked units l communication &
12
Wiring
data l socket outlets l connection units l moulded
blank plates
accessories
marked units l cooker controls l hotel ranges l
24
Wiring
communication & data l shaver socket l socket
outlet l connection units l moulded blank plates
accessories
control l cooker controls unit l special marked
Wiring
units l communication & data l socket outlets l 36
connection units l moulded blank plates
accessories
46
Wiring
communication & data l shaver socket l socket
outlet l connection units l moulded blank plates
accessories
l communication and data l blank plates l socket 56
Wiring
outlet l fuse connection units l connection units
accessories
switches l 20 & 45A double pole control l socket
62
Wiring
outlet l fuse connection units
5
Catalogue references index
Cat. ref. Page No. Cat. ref. Page No. Cat. ref. Page No. Cat. ref. Page No. Cat. ref. Page No.
6
Catalogue references index
Cat. ref. Page No. Cat. ref. Page No. Cat. ref. Page No. Cat. ref. Page No. Cat. ref. Page No.
7
stylea
beautiful
Its simple and neat design perfectly suits contemporary residential and commercial requirements.
Its modern, simple, neat and straight styling lines blends with today's interiors and hints at its reliability.
Acting as the link to power and lighting, whether for home entertainment or everyday tasks, you must have
confidence in the quality of wiring accessories.
wall switches P.12
• Installation time is reduced. • Faceplates are made from high grade PC ensuring excellent
scratch, impact and UV resistance
2 6
Terminal screws Dust proof
Terminal screws are supplied Protection sticker on sockets
backed out to save installation which prevents dust pollution
time and are captive so they won’t during the installation.
be lost.
Lead in
3 7
Moulded lead-ins help to guide the Switches
driver blade to the screw head. Single pole switches are simplified
to 2 parts - rocker and plate
which makes installation easier
and quicker.
4 8
Capacity increase High safety
Increased wiring capacity of the All switches are equipped with a
new 13A socket terminals permits no welding design which ensures
the use of todays larger cables and a compulsory break when contact
reduces installation time. welding occurs. 10AX switches
do not require derating for
fluorescent loads.
stylea
wall switches
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Terminal markings denote:
BS EN 60669-1 long fixing screws 3 x 1.5 mm2 L1 = one way
IEC 60669-1 2 X 2.5 mm2 L2 = two way
CB certificate C = common
• Two way switches can be
• 'AX' rated - No need to derate wired either 1 way or 2 way • Material: Polycarbonate
for fluorescent loads
WXEL131 WXEL101
WXEL132
stylea
bell switches
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Material: Polycarbonate
BS EN 60669-1 long fixing screws 3 x 1.5 mm2
IEC 60669-1 2 X 2.5 mm2
CB certificate
WXEL12P
12
stylea
dimmer and fan controller switches
• Complies with • Supplied with M3.5 x 25 mm For dimmers • Material: Polycarbonate
BS EN 60669-2-1 long fixing screws • Frequency 50/ 60Hz
IEC 60669-2-1
IEC 60669-1 (WXEF75) • Capacity of each terminal: • Rating 500W max
3 x 1.5 mm2
• For incandescent lamps only
Dimmer switches
500W 2 way switched single 5 WXED1R500
WXED1R500 WXED2R500
Fan controller
400W 2 way switched 5 WXEF1R400
WXEF1R400 WXEF75
stylea
double pole control switches
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Material: Polycarbonate
BS EN 60669-1 long fixing screws L, N: 2 x 4 mm2
IEC 60669-1 E: 2 x 4 mm2
CB certificate
WXEL2D1 WXEL2D1N
WXEL2D2 WXEL2D2N
1 gang 2 way, large dolly 10 WXEL2D12
WXEL2D12 WXEL2D12N
13
stylea
special marked units
Description Pack Cat. Ref.
qty.
stylea
32A and 45A double pole control switches
• Complies with • Supplied with M3.5 x 25 mm long • Capacity of each terminal: • Material: polycarbonate
BS EN 60669-1 fixing screws L, N: 1 X 16.0 mm2
IEC 60669-1, CB certificate E: 2 X 16.0 mm2
WXER45D2
stylea
cooker control unit
• Complies with BS 4177 • Supplied with M3.5 x 25 mm long • Marking on cooker control
fixing screws units: ON, OFF and circuit
• Combined switch / sockets have identification cooker and socket
double pole 45A main switch • Capacity of each terminal:
& 13A switched socket outlet L, N: 1 x 16 mm2 • Material: Polycarbonate
E: 1 x 10 mm2
WXER45CCU
14
stylea
communication and data
• Supplied with M3.5 x 25 mm • Material: Polycarbonate
long fixing screws
WXETFM75 WXETV75
TV + FM splitter isolator SCV outlet (size 2) 10 WXETVFM2
TV + FM connector 10 WXETVFM
WXET1RJ5 WXET2RJ5
WXET1RJ6 WXET2RJ6 RJ11 telephone + RJ45 data outlet Cat 5e 10 WXETD
WXET2RJ WXETV75F
TV + RG6 connector without spliter 10 WXETV75R
WXET2A WXETVFMM
WXETVFMS
15
stylea
hotel ranges
• Complies with • Supplied with M3.5 x 25 mm • Material: Polycarbonate
BS EN 60669-1 long fixing screws
IEC 60669-1
Hotel range
Key tag switch with key card (time delay 60s) 5 WXEHKT
"DND" & "Please clean up" switches with (RED) neon 10 WXEHDC
WXEHKT WXEHDC
"DND" & "Please clean up" indication box with door bell switch 10 WXEHBD
WXEHBD
stylea
5A socket outlets
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Integral rocker design of
BS 546 long fixing screws L, N: 3 X 2.5 mm2 switched sockets provides
SS 472 E: 4 X 1.5 mm2 clear red 'on' indication
• Material: Polycarbonate
Socket outlet
5A round pin unswitched 10 WXES105
WXES105 WXES105S
stylea
10A socket outlet
• Complies with • Supplied with M3.5 x 25 • Integral rocker design of • Material: Polycarbonate
IEC 60884-2-3 long fixing screws switched sockets provides
clear red 'on' indication
• Capacity of each terminal:
L, N: 2 X 4.0 mm2
E: 3 X 2.5 mm2
Socket outlets
10A 2 pin unswitched universal 10 WXES10U
WXES10U2
16
stylea
13A socket outlets
• Complies with • Supplied with M3.5 x 25 mm • Integral rocker design of • Material: Polycarbonate
BS 1363-2 long fixing screws switched sockets provides
SS 145-2 clear red 'on' indication
• Capacity of each terminal:
• All terminal screws are facing L, N: 2 x 4.0 mm2 • Tough plastic back for durability
upward for ease of installation E: 3 x 2.5 mm2
Socket outlets
13A single unswitched 10 WXES113
13A twin switched with neon (size 2), single pole 10 WXES213N
WXES113S WXES213S
WXES113SDP WXES213SDP 13A single switched, double pole 10 WXES113SDP
WXES113N WXES213N
* Socket are supplied with free dust damage prevention sticker to give additional protection during installation.
* Sockets with red rocker are also available/ surcharge applies.
stylea
15A and 16A socket outlets
• Complies with • Supplied with M3.5 x 25 mm • Integral rocker design of • Material: Polycarbonate
BS 546 long fixing screws switched sockets provides
SS 472 clear red 'on' indication
IEC 60884 (for WXES116/ 116S) • Capacity of each terminal:
IEC 60884-1 (for WXES116IS) L, N: 2 X 4.0 mm2
E: 3 X 2.5 mm2
Socket outlets
15A round pin unswitched 10 WXES115
WXES115 WXES115S
German style sockets
16A German style (without shutter) 10 WXES116
17
stylea
shaver socket
• Complies with • Designed for use in bathrooms • Capacity of each terminal: A positive interlock prevents 2
BS EN 61558-2-5 and washrooms and 2 x 2.5 mm2 plugs being inserted
IEC 61558-2-5 incorporates a double wound simultaneously
CB certificate isolating transformer for an • Primary circuit is protected by
earth free supply. a self-resetting thermal • Material: Polycarbonate
• Supplied with M3.5 x 25 mm overload device. Insertion of
long fixing screws Input 230V a.c. output dual shaver plug automatically
voltage 230V a.c. and 115V a.c. switches on the transformer,
outlets rating 20VA on either removal automatically
voltage switches it off.
Shaver socket
115V /230V [20VA] (size 2) 1 WXES200
WXES200
stylea
fused connection units
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Material: polycarbonate
BS 1363-4 long fixing screws L, N: 3 X 4.0 mm2
E: 2 X 4.0 mm2 • Optional flex outlet
• Cable clamp accommodates • All switched units are double pole - for choice of use
up to 2.5 mm2 flexible cord • All units fitted with a 13A
fuse link to BS 1362, can be
supplied with 2A, 5A fuse link.
WXER13S WXER13SN
stylea
connection unit
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Material: polycarbonate
BS 5733 long fixing screws L, N: 2 x 6.0 mm2
E: 2 x 6.0 mm2
Connection unit
25A connection unit with flex outlet 10 WXER25
WXER25
18
stylea
moulded blank plates
• Complies with • Supplied with M3.5 x 25 mm • Material: Polycarbonate
BS 5733 long fixing screws
Blank plates
Blank plate (size 1) 20 WXEV1
WXEV1
WXEV2
stylea
decoration cover
Description Pack Cat. Ref.
qty.
Decoration cover
1 gang clip on cover (size 1) 20 WXEC1
WXEC2
WXEC2
19
system 10088
Large convex rocker switch
The system 10088 with large convex rocker switch is designed for distinctive appearance in
environments such as hotels, offices or homes.
The large convex rocker switch feature provides a subtle feel when switching. The product is available in a
full range of colours and finishes, which ensures the compatibility of the switches with the interior design.
The changeable clip on cover enables you to mix and match to create your own product character.
system 10088 has obtained the British Standard (BS) certificate from NEMKO UK, an international third
party laboratory.
wall switches P.24
• BS 5733
Expert
tips
1 5
Unique design Glow in dark
• Slim front plate • Grow in dark (4-5 hours)
• Combination of gloss and
matt finish
2 6
Cover with gold or sliver Screws in one direction
strip • Easier for installation
• More choice for your decoration
3 7
Blue LED Available in four colours
• Location or ON indicator
4 8
Removal slot Safety shutter
• No damage to the wall when • All sockets equipped with
removing covers shutters preventing single
object intrusion
• Safe for your children
system 10088
wall switches
• Complies with • Supplied with M3.5 x 25 mm • All switches without LED have • Terminal markings denote:
BS EN 60669-1 long fixing screws glow in the dark fluorescent L1 = one way
IEC 60669-1 indicators L2 = two way
CB certificate • Switches available with Blue C = common
LED for illuminated identification • Capacity of each terminal:
• 'AX' rated - No need to derate in a dark environment 3 x 1.5 mm2 • Material: Polycarbonate
for fluorescent loads 2 X 2.5 mm2
• All switches with LED are
pre-wired as location indicator • Two way switches can be
wired either 1 way or 2 way
* If "ON" indicator is required, extra loop terminal is needed for wiring / surcharge applies
24
system 10088
bell switches
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Material: Polycarbonate
BS EN 60669-1 long fixing screws 3 x 1.5 mm2
IEC 60669-1 2 X 2.5 mm2
CB certificate
WGL12P
system 10088
dimmer switch
• Complies with • Supplied with M3.5 x 25 mm • Dimmers can control • Material: Polycarbonate
BS EN 60669-2-1 long fixing screws incandescent lamps
IEC 60669-2-1
• Capacity of each terminal: • Frequency 50/ 60Hz
3 x 1.5 mm2
Dimmer switch
600W large dolly with neon single (cycle action) 10 WGLD600
WGLD600
system 10088
double pole control switches
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Material: Polycarbonate
BS EN 60669-1 long fixing screws L, N: 2 x 4.0 mm2
IEC 60669 E: 2 x 4.0 mm2
CB certificate
25
system 10088
special marked units
Description Pack Cat. Ref.
qty.
system 10088
32A and 45A double pole control switches
• Complies with • Supplied with M3.5 x 25 mm long • Capacity of each terminal: • Material: polycarbonate
BS EN 60669-1 fixing screws and screw caps L, N: 1 X 16.0 mm2
IEC 60669-1, CB certificate E: 2 X 16.0 mm2
WGR32D1 WGR45D2
WGR45D1
system 10088
cooker control unit
• Complies with BS 4177 • Supplied with M3.5 x 25 mm long • Capacity of each terminal: • Marking on cooker control
fixing screws and screw caps L, N: 1 x 16 mm2 units: ON, OFF and circuit
• Combined switch / sockets have E: 1 x 10 mm2 identification cooker and socket
double pole 45A main switch
& 13A switched socket outlet • Material: Polycarbonate
WGR45CCU
26
system 10088
hotel ranges
• Complies with • Supplied with M3.5 x 25 mm • Material: Polycarbonate
BS EN 60669-1 long fixing screws
IEC 60669-1
Hotel range
Key tag switch with key card (time delay 60s) 5 WGHKT
"DND" & "Please clean up" switches with (RED) neon 10 WGHDC
WGHKT WGHDC "DND" & "Please clean up" indication box with door bell switch 10 WGHBD
WGHBD
system 10088
communication and data
• Supplied with M3.5 x 25 mm • Material: Polycarbonate
long fixing screws
WGT2RJ WGTV75F
WGTBT5 WGTV75R
27
system 10088
shaver socket
• Complies with • Designed for use in bathrooms • Capacity of each terminal: A positive interlock prevents 2
BS EN 61558-2-5 and washrooms and 2 x 2.5 mm2 plugs being inserted
IEC 61558-2-5 incorporates a double wound simultaneously
isolating transformer for an • Primary circuit is protected by
• Supplied with M3.5 x 25 mm earth free supply. a self-resetting thermal • Material: Polycarbonate
long fixing screws overload device. Insertion of
Input 230V a.c. output dual shaver plug automatically
voltage 230V a.c. and 115V a.c. switches on the transformer,
outlets rating 20VA on either removal automatically
voltage switches it off.
Shaver socket
115V /230V [20VA] (size 2) 1 WGS200
WGS200
system 10088
5A socket outlets
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Integral rocker design of
BS 546 long fixing screws L, N: 3 X 2.5 mm2 switched sockets provide clear
SS 472 E: 4 X 1.5 mm2 red 'on' indication
• Material: Polycarbonate
Socket outlet
5A round pin unswitched 10 WGS105
system 10088
10A socket outlets
• Complies with • Supplied with M3.5 x 25 • Integral rocker design of • Material: Polycarbonate
IEC 60884-2-3 long fixing screws switched sockets provide clear
red 'on' indication
• Capacity of each terminal:
L, N: 2 X 4.0 mm2
E: 3 X 2.5 mm2
Socket outlets
10A 2 pin unswitched universal socket 10 WGS10U
WGS10U2
28
system 10088
13A socket outlets
• Complies with • Supplied with M3.5 x 25 mm • Integral rocker design of • Material: Polycarbonate
BS 1363-2 `long fixing screws switched sockets provide clear
SS 145-2 red 'on' indication
• Capacity of each terminal:
• All terminal screws upward L, N: 2 x 4.0 mm2 • Tough plastic back for durability
facing for ease of installation E: 3 x 2.5 mm2
Socket outlets
13A single unswitched 10 WGS113
13A twin switched with neon (size 2), single pole 10 WGS213N
WGS113N WGS213N
13A twin switched with neon (size 2), double pole 10 WGS213DP
WGS113DP WGS213DP
* Sockets are with FREE dust preventive sticker to give additional protection during installation
* Sockets with red rocker are also available/ surcharge applies
system 10088
15A and 16A socket outlets
• Complies with • Supplied with M3.5 x 25 mm • Integral rocker design of • Material: Polycarbonate
BS 546 long fixing screws switched sockets provide clear
SS 472 red 'on' indication
IEC 60884 (for WGS116/ 116S) • Capacity of each terminal:
IEC 60884-1 (for WGS16IS) L, N: 2 X 4.0 mm2
E: 3 X 2.5 mm2
Socket outlets
15A round pin unswitched 10 WGS115
15A round pin switched 10 WGS115S
WGS115 WGS115S
WGS116 WGS116IS
WGS116S Universal socket
16A 3 pins switched universal 10 WGS116IS
29
system 10088
fused connection units
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Material: polycarbonate
BS 1363-4 long fixing screws L, N: 3 X 4.0 mm2
E: 2 X 4.0 mm2 • Optional flex outlet
• Cable clamp accommodates • All switched units are - for choice of use
up to 2.5 mm2 flexible cord double pole • All units fitted with a 13A
fuse link to BS 1362, can be
supplied with 2A, 5A fuse link.
WGR13SN
system 10088
connection unit
• Complies with BS 5733 • Supplied with M3.5 x 25 mm 25A connection unit • Material: polycarbonate
long fixing screws • Capacity of each terminal:
L, N: 2 x 6.0 mm2
E: 2 x 6.0 mm2
Connection unit
25A connection unit with flex outlet 10 WGR25
WGR25
system 10088
moulded blank plates
• Complies with BS 5733 • Supplied with M3.5 x 25 mm • Material: Polycarbonate
long fixing screws
Blank plates
Blank plate (size 1) 20 WGV1
WGV1 WGV2
30
system 10088
accommodation plates and modules
Description Pack Cat. Ref.
qty.
Modules
13A universal socket (45 mm x 45 WGSM13I
mm) 10
WGSM13I WGSM16EA 16A 2 pin Euro American socket (22.5 mm x 45 mm) 10 WGSM216EA
WGSM216EA WGSMT16EA
16A 3 pin twin Euro American socket (45 mm x 67.5 mm) 5 WGSMT16EA
Keystone 8 pin Cat 6 Data (22.5 mm x 45 mm) 10 WGMRJ456
WGMRJ45 WGMTV75F
WGMRJ456
WGMTV75PF WGMV1
Blank module (22.5 mm x 45 mm) 10 WGMV1
Motion detectors
Systo 2M PIR without neutral (45mm x 45mm) 10 WS050
WS050 WS051
Dimmers
Systo 2M Rotative dimmer ferro (45mm x 45mm) 10 WS063
WS300 WS301
31
system 10088
decoration cover
Description Pack Cat. Ref.
qty.
Decoration cover
Clip on cover Carbon (size 1) 40 WGC1CA
WGC1CA WGC2CA
Clip on cover Titanium Grey (size 1) 40 WGC1TG
WGC1 WGC2
system 10088
multi-gang cover
Multi-gang cover
2 multi-gang cover (horizontal) 30 WGC2-H
WGC3-H
WGC2-V
WGC3-V
32
Colour 10088
(B). Ordering
1. If whole product is in WHITE colour:
WGL111
2. If whole product is colour sprayed:
WGL111CA
33
system 8000
With system 8000 we have developed a very slim front plate with modern aesthetically pleasing
curves, the fixing screws are concealed by integral plastic caps, which ensure the product has
a very clean look. The front plate colour is cool white, which provides a shiny clean finish for the
modern home or office design. The very distinctive integral rocker "ON" indication ensures complete
confidence in contact position.
system 8000 has obtained the British Standard (BS) certificate from NEMKO UK, an International third
party laboratory.
wall switches P.36
XP8110RED
2 gang 1 way 10 XP8221
*Remark: please contact your local sales office for this customised product.
36
system 8000
bell switches
• Complies with
BS EN 60669-1 • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Material: Polycarbonate
IEC 60669-1 long fixing screws and screw 3 x 1.5 mm2
CB certificate caps 2 X 2.5 mm2
XP8910 XP8911
system 8000
dimmer and fan controller switches
• Complies with • Supplied with M3.5 x 25 mm • Frequency 50/ 60Hz • Material: Polycarbonate
BS EN 60669-2-1 long fixing screws and screw
IEC 60669-2-1 caps • Rating 500W max
IEC 60669-1 (XP8103)
• Capacity of each terminal: • For incandescent lamps and
3 x 1.5 mm2 max 150W halogen lamps
2 x 2.5 mm2
Dimmer switches
500W 2 way switched single 5 XP8515
XP8515 XP8525
Fan controller
400VA 2 way switched fan control 5 XP8105
XP8105 XP8103
37
system 8000
20AX double pole control switches
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Material: Polycarbonate
BS EN 60669-1 long fixing screws and screw L, N: 2 X 6.0 mm2
IEC 606691-1 caps E: 2 X 4.0 mm2
CB certificate
XR8200 XR8206 1 gang double pole switch + 10AX single pole switch 10 XR8203
1 gang double pole switch + twin 10AX single pole switch 10 XR8204
1 gang double pole control switch with neon & flex outlet 10 XR8207
XR8207 XR8222
system 8000
32A and 45A double pole control switches
• Complies with • Supplied with M3.5 x 25 mm long • Capacity of each terminal: • Material: polycarbonate
BS EN 60669-1 fixing screws and screw caps L, N: 1 X 16.0 mm2
IEC 60669-1 E: 1 X 16.0 mm2
CB certificate
XR8457 XR8456
38
system 8000
cooker control unit
• Complies with BS 4177 • Supplied with M3.5 x 25 mm long • Marking on cooker control • Material: Polycarbonate
fixing screws and screw caps units: ON, OFF and circuit
• Combined switch / sockets have identification cooker and socket
double pole 45A main switch • Capacity of each terminal:
& 13A switched socket outlet L, N: 1 X 16.0 mm2
E: 1 X 10.0 mm2
XR8458
system 8000
special marked units
39
system 8000
communication and data
• Supplied with M3.5 x 25 mm long • Material: Polycarbonate
fixing screws and screw caps
XT8014 XT8017
system 8000
5A socket outlets
• Complies with • Supplied with M3.5 x 25 mm long • Integral rocker design of • Material: Polycarbonate
BS 546 fixing screws and screw caps switched sockets provide clear
SS 472 red 'on' indication
• Capacity of each terminal:
L, N: 2 x 2.5 mm2
E: 3 x 1.5 mm2
Socket outlets
5A round pin unswitched 10 XS8905
XS8905 XS8906
40
system 8000
10A socket outlets
• Complies with • Capacity of each terminal: • Integral rocker design of • Material: Polycarbonate
IEC 60884-2-3 L, N: 2 x 4.0 mm2 switched sockets provide clear
E: 3 x 2.5 mm2 red 'on' indication
• Supplied with M3.5 x 25 mm long
fixing screws and screw caps
Socket outlets
XS8221
system 8000
13A socket outlets
• Complies with • Supplied with M3.5 x 25 mm long • Integral rocker design of • Material: Polycarbonate
BS 1363-2 fixing screws and screw caps switched sockets provide clear
SS 145-2 red 'on' indication
• Capacity of each terminal:
• All terminal screws upward L, N: 2 X 4.0 mm2 • Tough plastic back for durability
facing for ease of installation E: 3 X 2.5 mm2
Socket outlets
13A single unswitched 10 XS8113
XS8117 XS8217
XS8113DP XS8213DP
* Sockets are with FREE dust preventive sticker to give additional protection during installation
* Sockets with Red rocker switch are also available / Surcharge applies
41
system 8000
15A and 16A socket outlets
• Complies with • Supplied with M3.5 x 25 mm long • Integral rocker design of • Material: Polycarbonate
BS 546 fixing screws and screw caps switched sockets provide clear
SS 472 red 'on' indication
IEC 60884 (for XS8413/ 8414) • Capacity of each terminal:
IEC 60884-1 (for XS8116IS) L, N: 2 x 4.0 mm2
E: 3 x 2.5 mm2
Socket outlets
15A round pin unswitched 10 XS8915
XS8915 XS8916
XS8413 XS8116IS
XS8414
Universal socket
16A 3 pin switched universal 10 XS8116IS
42
system 8000
fused connection units
• Complies with • Supplied with M3.5 x 25 mm long • Capacity of each terminal: • Optional flex outlet
BS 1363-4 fixing screws and screw caps L, N: 3 x 4.0 mm2 - for choice of use
E: 2 x 4.0 mm2
• Cable clamp accommodates up • All switched units are • Material: Polycarbonate
to 2.5mm2 flexible cords double pole • All units fitted with a 13 Amp fuse
link to BS 1362, can be supplied
with 2 Amp, 5 Amp fuse link
XR8130 XR8131 13A switched fused with neon and flex outlet 10 XR8137
XR8137 XR8138
system 8000
connection units
• Complies with • Supplied with M3.5 x 25mm long 25A connection unit 45A connection unit
BS 5733 fixing screws and screw caps • Capacity of each terminal: • Capacity of each terminal:
L, N: 2 x 6.0 mm2 L, N: 2 x 6.0 mm2
E: 2 x 6.0 mm2 E: 2 x 6.0 mm2
• Material: Polycarbonate
Connection units
25A connection unit with flex outlet 10 XR8250
XR8250 XR8450
system 8000
moulded blank plates
• Complies with • Supplied with M3.5 x 25 mm long • Material: Polycarbonate
BS 5733 fixing screws and screw caps
Blank plate
Blank plate (size 1) 20 XV8101
XV8101 XV8102
43
system 9088
The large concave rocker switch feature provides a subtle feel when switching.
The product is available in a full range of colours and finishes, which ensures the compatibility of the
switches with the interior design. The changeable clip on cover enables you to mix and match to
create your own product character.
system 9088 has obtained the British Standard (BS) certificate from NEMKO UK, an International third
party laboratory.
wall switches P.46
XP9610
XP9620
XP9810
XP9820
XL9317
XL9327
XL9241
XL9242
46
system 9088
bell switches
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Material: Polycarbonate
BS EN 60669-1 long fixing screws 3 x 1.5 mm2
IEC 60669-1 2 X 2.5 mm2
CB certificate
XL9911NM
system 9088
dimmer switch and fan control switches
• Complies with • Supplied with M3.5 x 25 mm • Dimmer can control • Material: Polycarbonate
BS EN 60669-2-1 long fixing screws incandescent lamps only
IEC 60669-2-1 (for XL9515)
• Frequency 50/ 60Hz
• Dimmers can control
• Capacity of each terminal: incandescent lamps and
3 x 1.5 mm2 max 150W halogen lamps
2 x 2.5 mm2 (for XP9515 & XP9525)
Dimmer switches
600W large dolly with neon single (cycle action) 10 XL9515
Fan controller
400W 2 way switched 10 XP9105
XP9525
XP9105
47
system 9088
double pole control switches
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Material: Polycarbonate
BS EN 60669-1 long fixing screws L, N: 2 x 4 mm2
IEC 60669-1 E: 2 x 4 mm2
CB certificate
XL9206 XL9222
system 9088
special marked units
Description Pack Cat. Ref.
qty.
system 9088
32A and 45A double pole control switches
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Material: Polycarbonate
BS EN 60669-1 long fixing screws L, N: 1 x 16.0 mm2
IEC 60669-1 E: 2 x 16.0 mm2
CB certificate
XR9457 XR9456
48
system 9088
cooker control unit
• Complies with • Combined switch / sockets • Capacity of each terminal: • Material: Polycarbonate
BS 4177 have double pole 45A main L, N: 1 x 16 mm2
switch and 13A switched E: 1 x 10 mm2
socket outlet
• Marking on cooker control
• Supplied with M3.5 x 25 mm units: ON, OFF and circuit
long fixing screws identification cooker and socket
XR9458
system 9088
hotel ranges
• Complies with • Supplied with M3.5 x 25 mm • Material: Polycarbonate
BS EN 60669-1 long fixing screws
IEC 60669-1
Hotel range
Key tag switch with key card (time delay 60s) 5 XH9001
"DND" & "Please clean up" switches with (RED) neon 10 XH9002
XH9001 XH9002 "DND" & "Please clean up" indication box with door bell switch 10 XH9003
XH9003
49
system 9088
communication and data
• Supplied with M3.5 x 25 mm • Material: Polycarbonate
long fixing screws
TV + FM connector 10 XT9005
XT9011 XT9012
50
system 9088
shaver socket
• Complies with • Designed for use in bathrooms • Capacity of each terminal: prevents 2 plugs being
BS EN 61558-2-5 and washrooms and 2 x 2.5 mm2 inserted simultaneously
IEC 61558-2-5 incorporates a double wound
isolating transformer for an • Primary circuit is protected by • Material: Polycarbonate
• Supplied with M3.5 x 25 mm earth free supply. a self-resetting thermal
long fixing screws Input 230V a.c. overload device. Insertion of
output dual voltage 230V a.c. shaver plug automatically
and 115V a.c. outlets rating switches on the transformer,
20VA on either voltage removal automatically switches
it off. A positive interlock
Shaver socket
115V / 230V [20VA] (size 2) 1 XS9200
XS9200
system 9088
5A socket outlets
• Complies with • Supplied with M3.5 x 25 mm • Integral rocker design of • Material: Polycarbonate
BS 546 long fixing screws switched sockets provide clear
SS 472 red 'on' indication
• Capacity of each terminal:
L, N: 2 X 2.5 mm2
E: 3 X 1.5 mm2
Socket outlets
5A round pin unswitched 10 XS9905
XS9905 XS9906
system 9088
10A socket outlets
• Complies with • Capacity of each terminal: • Integral rocker design of • Material: Polycarbonate
IEC 60884-2-3 L, N: 2 X 4.0 mm2 switched sockets provide clear
E: 3 X 2.5 mm2 red 'on' indication
• Supplied with M3.5 x 25 mm
long fixing screws
Socket outlets
10A 2 pin unswitched universal socket 10 XS9211
XS9221
51
system 9088
13A socket outlets
• Complies with • All terminal screws upward • Capacity of each terminal: • Tough plastic back for
BS 1363-2 facing for ease of installation L, N: 2 x 4.0 mm2 durability
SS 145-2 E: 3 x 2.5 mm2
• Supplied with M3.5 x 25 mm • Material: Polycarbonate
long fixing screws • Integral rocker design of
switched sockets provide clear
red 'on' indication
Socket outlets
13A single unswitched 10 XS9113
XS9113 XS9213
XS9114 XS9214
13A twin switched (size 2) 10 XS9214
* Sockets are with FREE dust preventive sticker to give additional protection during installation
* Sockets with red rocker are also available/ surcharge applies
system 9088
15A and 16A socket outlets
• Complies with • Supplied with M3.5 x 25 mm • Integral rocker design of • Material: Polycarbonate
BS 546 long fixing screws switched sockets provide
SS 472 clear red 'on' indication
IEC 60884 (for XS9413/ XS9414) • Capacity of each terminal:
IEC 60884-1 (for XS9116IS) L, N: 2 X 4.0 mm2
E: 3 X 2.5 mm2
Socket outlets
15A round pin unswitched 10 XS9915
XS9915 XS9916
XS9413 XS9116IS
XS9414 Universal socket
16A 3 pins switched universal 10 XS9116IS
52
system 9088
fuse connection units
• Complies with • Cable clamp accommodates • Capacity of each terminal: • Material: polycarbonate
BS 1363-4 up to 2.5mm2 flexible cord L, N: 3 X 4.0 mm2
E: 2 X 4.0 mm2 • Optional flex outlet
• Supplied with M3.5 x 25 mm - for choice of use
long fixing screws • All units fitted with a 13A
fuse link to BS 1362, can be
• All switched units are double pole supplied with 2A, 5A
fuse link.
XR9130 XR9131 13A switched fused with neon and flex outlet 10 XR9137
XR9137 XR9138
system 9088
connection units
• Complies with • Supplied with M3.5 x 25 mm 25A connection unit 45A connection unit
BS 5733 long fixing screws • Capacity of each terminal: • Capacity of each terminal:
L, N: 2 x 6.0 mm2 L, N: 2 x 6.0 mm2
E: 2 x 6.0 mm2 E: 2 x 6.0 mm2
• Material: Polycarbonate
Connection units
25A connection unit with flex outlet 10 XR9250
XR9250 XR9450
system 9088
blank plate
• Complies with • Supplied with M3.5 x 25 mm • Material: Polycarbonate
BS 5733 long fixing screws
Blank plates
Blank plate (size 1) 20 XV9101
XV9101 XV9102
53
Stainless steel
Stainless steel series incorporates double pole switched sockets, fused connection units, communication,
connection unit, blank plates.
Brushed Chrome finishing of this range provides stylish appearance to complement any setting, whether
in the office, hotel or at home. The products are highly scratch resistant with an epoxy lacquer finish, the
products will maintain their appearance for many years.
Stainless Steel series has obtained the British Standard (BS) certificate from intertek, an international
third party laboratory.
wall switches P.56
XP320SS XP001SS
XP420SS
Stainless steel
bell switch
• Complies with • Supplied with M3.5 x 25mm • Bell push / press can be wired
BS EN 60669-1 long fixing screws to make 250V a.c.
IEC 60669-1
XP910SS
56
Stainless steel
20A double pole control switch
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal:
BS EN 60669-1 long fixing screws 3 x 2.5 mm2 conductor
IEC 60669-1
XR206SS
Stainless steel
32A and 45A double pole control switches
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal:
BS EN 60669-1 long fixing screws 1 x 16 mm2 conductor
IEC 60669-1 1 x 10 mm2 earth conductor
XR327SS XR457SS
Stainless steel
communication and data
• Supplied with M3.5 x 25mm
long fixing screws
XT010SS
57
Stainless steel
blank plates
• Supplied with M3.5 x 25 mm
long fixing screws
Black plate
Blank plate (size 1) 20 XV102SS
XV102SS XV202SS
Stainless steel
13A socket outlets
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Tough plastic back for
BS 1363-2 long fixing screws 4 x 2.5 mm2 conductors switched; durability
SS 145-2 4 x 2.5 mm2 unswitched
• Double pole switching
mechanism
Socket outlets
13A single unswitched 10 XS113SS
XS114SS XS214SS 13A twin switched with neon (size 2), double pole 5 XS215SS
XS115SS XS215SS
58
Stainless steel
15A socket outlets
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal:
BS 546 long fixing screws 3 x 2.5 mm2 conductors
SS 472 3 x 2.5 mm2 earth conductors
Socket outlets
15A round pin switched, double pole 10 XS916SS
Stainless steel
fused connection units
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal: • Optional flex outlet
BS 1363-4 long fixing screws switched: 4 x 2.5 mm2 - for choice of use
unswitched: 4 x 2.5 mm2
• All switched units are double pole • Cable clamp accommodates conductors
up to 2.5 mm2 flexible cord
• All units fitted with a 13 Amp
fuse link to BS 1362, can be
supplied with 2 Amp, 5 Amp
fuse link
XR138SS
Stainless steel
connection unit
• Complies with • Supplied with M3.5 x 25 mm • Capacity of each terminal:
BS 5733 long fixing screws L, N: 2 x 6.0 mm2
E: 2 x 6.0 mm2
Connection unit
25A connection unit with flex outlet 10 XR250SS
XR250SS
59
Metal clad
Metal clad series incorporates double pole switched sockets, fused connection units.
The hard-wearing range of Metal clad accessories is designed to withstand the toughest conditions and
heaviest knocks, particularly in industrial installations. The front plate is coated with a two layer tough
paint finish and will maintain its good looks through years of hard labour.
Metal clad series has obtained the British Standard (BS) certificate from intertek, an international third
party laboratory.
wall switches P.62
XP320MC XP420MC
Metal clad
20A double pole control switch
• Complies with • Supplied with M3.5 x 14 mm • Capacity of each terminal:
BS EN 60669-1 long fixing screws 3 x 2.5 mm2 conductor
IEC 60669-1
Metal clad
45A double pole control switch
• Complies with • Supplied with M3.5 x 14 mm • Capacity of each terminal:
BS EN 60669-1 long fixing screws 1 x 16 mm2 conductor
IEC 60669-1 1 x 10 mm2 earth conductor
XR457MC
62
Metal clad
13A socket outlets
• Complies with • Supplied with M3.5 x 14 mm • Capacity of each terminal: • Double pole switching
BS 1363-2 long fixing screws 4 x 2.5 mm2 mechanism
SS 145-2
• All terminal screws upward • Tough plastic back for durability
facing for ease of installation
Socket outlets
13A single switched, double pole 10 XS114MC
XS114MC XS214MC 13A single switched with neon, double pole 10 XS115MC
13A twin switched with neon (size 2), double pole 5 XS215MC
XS115MC XS215MC
Metal clad
15A socket outlets
• Complies with • Supplied with M3.5 x 14 mm • Capacity of each terminal:
BS 546 long fixing screws 3 x 2.5 mm2 conductors
SS 472 3 x 2.5 mm2 earth conductors
Socket outlets
15A round pin switched 10 XS916MC
XS916MC
Metal clad
fused connection units
• Complies with • Supplied with M3.5 x 14 mm • Capacity of each terminal: • Optional flex outlet
BS 1363- 4 long fixing screws 4 x 2.5 mm2 - for choice of use
• All switched units are double pole • Cable clamp accommodates • All units fitted with a 13 Amp fuse
up to 2.5 mm2 flexible cord link to BS 1362, can be supplied
with 2 Amp, 5 Amp fuse link
XR130MC XR134MC 13A switch fused with neon and flex outlet 10 XR137MC
XR137MC
63
IP66
For the toughest environment
New
IP66 socket outlets P.68
doorbell P.70
modules P.72
lampholders P.72
WA covers P.73
IP66
Beautifully safe
With its rugged good look and ease of operation you can be sure that IP66 will provide
protection for your wiring accessories in even the toughest of environment.
A host of innovative design solutions provide both installer and end user with a range of
products that is easy to work with and retain their good looks whatever the environment throws
at them.
1 3
5
The advantages for you: Technical data:
• IP66 complete protection from dust and high pressure water jets • IP66 rating conforms to IEC/ BS EN 60529
• Easy to open catch and unique 180º opening lid • Functional products tested and certified to appropriate
British/ IEC Standards. Product range has been
• Suitable for moulded on plugs independently tested and certified
1 5
The factory fitted soft gel seal fits
Extended enclosure and extra snugly around power cables to
wide gel seal means even maintain the IP66 rating in use
moulded on plugs can be with the lid fully closed.
accommodated.
2 6
A padlock of up to 5mm diameter If 25mm conduit is needed, then
shank can be fitted to the a clearly marked drill out position
enclosure to prevent unauthorised allows safe and precise use of a
use. 25mm hole saw.
Knockouts Drain
3 7
20mm cable entry knockouts are The drain feature can be drilled
secure and easily removed by out using a 5mm drill (opening the
pushing out from the inside of the drain hole will reduce the IP rating
back box. of the product).
180º
4
With its unique dual action hinge,
the lid of the box can be opened
a full 180 degrees for ease of plug
insertion and switch operation.
IP66 range
Complies with • Robust and rugged enclosures Socket outlets • Cable entries:
• 13A socket outlets comply designed to withstand the • Unique double hinge allows 90 x 90 = 4x20, 1x20 & 1x25
with BS 1363-2 & SS 145 part 2 elements. lid to fully open through 180º. 103 x 116.5 = 4x20, 1x20 & 1x25
• 15A socket outlets comply • Fixing point for padlock. 164 x 116.5 = 6x20, 1x20 & 1x25
with BS 546 & SS 472
• Fused connection units
comply with BS 1363-4
• IP66 rating conforms to
IEC/ BS EN 60529
New
Wall switches
10AX 1 gang 2 way switch 90 x 90 1 WXPPS12
WXPPS22
Socket outlets
13A 1 gang unswitched socket 103 x 116.5 1 WXPS81
13A 1 gang double pole switched socket with neon 103 x 116.5 1 WXPSS81N
13A 2 gang double pole switched socket with neon 164 x 116.5 1 WXPSS82N
WXPSS81
13A unswitched fused connection unit with flex outlet 103 x 116.5 1 WXPSU83FO
WXPSS82
68
IP66 isolator
Description: • Complies with Rating AC22A is for switching Mechanical specification:
The range of IP66 isolators BS EN 60947-3 of mixed resistive and Protection Category: IP66
are designed to be used in IEC 60947-3 inductive loads, including
outdoor applications with IP66 AS 3947-3 moderate overloads. Material: Polycarbonate – UV grade.
degree of protection. They are
rated at AC22A and AC23A offer Rated voltage: 250V ~ AC Rating AC23A is for switching Devices & accessories:
options of 2, 3 poles and 4 poles 440V ~ AC of motor loads or other highly DP 20-40A
with switched neutral. They are inductive loads. TP & N 20-40A
compact and easy to install with 2
screw quick release top cover TP & SW N 20-63A
Rating: AC22A
2 pole
20A 2 pole IP66 1 JG220U
32A 2 pole IP66 1 JG232U
40A 2 pole IP66 1 JG240U
63A 2 pole IP66 1 JG263U
3 pole
20A 3 pole IP66 1 JG320U
32A 3 pole IP66 1 JG332U
40A 3 pole IP66 1 JG340U
Rating: AC23A
2 pole
20A 2 pole IP66 1 JG220IN
32A 2 pole IP66 1 JG232IN
40A 2 pole IP66 1 JG240IN
63A 2 pole IP66 1 JG263IN
3 pole
20A 3 pole IP66 1 JG320IN
32A 3 pole IP66 1 JG332IN
40A 3 pole IP66 1 JG340IN
Rating: AC22A
3 pole
63A 3P IP65 isolator 1 JG363S
80A 3P IP65 isolator 1 JG380S
125A 3P IP65 isolator 1 JG325S
JG380S
69
Doorbell
• Complies with XC001 XC002 • Only dingdong sound
BS EN 61558-1:1998 Dimension: Dimension:
BS EN 61558-2-8:1999 105mm (w) x 168mm (h) x 45mm (d) 105mm (w) x 168mm (h) x 45mm (d)
IEC 60335-1
Power source: 220-240V AC 50Hz Power source:
Transformer output: 6VDC 4 x 1.5V R14C batteries
Doorbells
220-240V AC 50Hz 1 XC001
XC001 XC002
Door chime
• Complies with • 250V AC or 4.5V DC (AAA x 3) • With adjustable melody / ding • Material: Polycarbonate
BS EN 62080 dong sound
IEC 62080 • Frequency 50/ 60 Hz
• Supplied with M3.5 x 25mm long
fixing screws
Door chime
For stylea 10 WXEDC01
WGDC01
For system 10088 10
XD9001
70
RCD socket
• Complies with • Voltage: RCD section: • Through fault withstand current:
BS EN 7288:1990 220/ 240 ac 50/60Hz • Double pole 1500A
RCD sockets
13A single switched, latching 1 WGS114RCD
WGS114RCD WGS214RCD
XS113FM
XS213FM
WGFFVE3BS
71
Modules
Description Pack Cat. Ref.
qty.
Modules
13A universal socket (45 mm x 45 mm) 10 WGSM13I
WGSM13I WGSM16EA 16A 2 pin Euro American socket (22.5 mm x 45 mm) 10 WGSM216EA
16A 3 pin Twin Euro American socket (45 mm x 67.5 mm) 5 WGSMT16EA
WGMTV75PF WGMV1
WS012 WS161
Lampholders
Straight BC batten Ceiling rose Pattress box • 2 earth terminals
• Complies with • Complies with • Complies with
BS EN 61184:1997 BS 67 BS 5732 • Feet on base to add mounting
on uneven surfaces
Lampholders
3 terminal, home office shield BC batten 10 XB8001
(pin type)
XB8003 XB8004
72
Mounting boxes
• Complies with • Colour and size match to • Knockouts are provided on the • With earth terminal
BS 5733 hager 8000, 9000, 9088, 10088 base and sides for cable entry
series White WA • Material: PVC
XB8352
XB8472
WA covers
Description Pack Cat. Ref.
qty.
WA cover for switch 10 XC9001
XC9003 XC9004
73
Technical information
product standard P.76 - 78
CE marking P.79
76
Product standards
Switches BS EN 60669-1 : 2000 Switches for household and similar fixed electrical installations
IEC 60669-1 Ed.3.2b:2007
CB certificate
Fused connection unit, cord outlets BS 5733 : 1995 Switches for household and similar fixed electrical installations with
particular requirements for timedelay switches (TDS)
Dimmers BS EN 60669-2-3: 2006 Switches for household and similar fixed electrical installations with
particular requirements for timedelay switches (TDS)
Frames and plates BS 5733 : 1995 Switches for household and similar fixed electrical installations
with particular requirements for timedelay switches (TDS)
Boxes BS 4662 : 1980 or Specification for boxes for the enclosure of electrical accessories
IEC 60670-1:2002
77
Product standards
10 Amp Wall switch BS EN 60669-1: 2000 Switches for household and similar fixed electrical installations
IEC 60669-1 Ed.3.2b:2007
CB certificate
Dimmer switches BS EN 60669-2-1: 2004 Electronic variable control switches (dimmer switches) for
IEC 60669-2-1 Ed.4.0b: 2002 tungsten filament lighting
13 Amp Socket Outlets BS 1363 : Part 2 : 1995 13A plugs, socket-outlets, adaptors and connection units
SS145
15 Amp Switched Socket BS 546 : 1950 (1988) Specification. Two-pole and earthing-pin plugs, socket-outlets
SS472 and socket-outlet adaptors
20 Amp D.P. Switches BS EN 60669-1 : 2000 Switches for household and similar fixed electrical installations
IEC 60669-1 Ed.3.2b: 2007
CB certificate
13 Amp Fused Connection Unit BS 1363 : Part 4 : 1995 Specification for 13A fused connection units switched and
unswitched
45 Amp D.P. Switches BS EN 60669-1 : 2000 Switches for household and similar fixed electrical installations
IEC 60669-1 Ed.3.2b: 2007
CB certificate
Shaver Socket Outlet BS EN 61558-2-5: 1998 General Requirements Isolating transformers and safety isolating
transformers
25 Amp/ Amp Flex Outlet Plate BS 5733: 1995 General Requirements for Electrical Accessories
Ceiling rose BS 67
78
CE marking
A directive is a piece of mandatory European Legislation European Council Directive 73/23/EEC with an amendment 93/68/EEC
implemented by regulations in all member countries. Its purpose is is known as the Low Voltage Directive.
to allow free movement of goods that are safe and fit for use into and
within the European Union. The Low Voltage Directive has been implemented into UK law by the
“ Electrical Equipment (Safety) Regulations 1994” and apply to all
CE marking is not a quality mark and it does not indicate that any electrical / electronic equipment operating at a voltage of
testing or certification has been carried out. 50-1000 V a.c. or 75-1500 V d.c.. They do not apply to plugs,
socket outlets and adapters which are covered by the Plugs and
Sockets (Safety) Regulations 1994.
The marking.
CE marking is a statement by the manufacturer that the product
complies with the essential requirements of all relevant Directives, Relationship between the Electrical Equipment (Safety)
notably in the area of technical safety and conformity assessment.
Regulations, Harmonised standards and the IEE Wiring
CE marking can appear on the product or packaging or documentation Regulations Sixteenth Edition.
or combination thereof dependant upon which directive it has to
comply with.
CE marking is a very specific graphical symbol and must be clearly The Electrical Equipment (Safety) Regulations requires electrical
separated from other marks. equipment to be safe. Electrical equipment which satisfies the safety
provisions of Harmonised standards shall be taken to comply with
this requirement, unless there are reasonable grounds for suspecting
that the equipment does not so comply.
Directives.
It is the responsibility of the manufacturer or his authorised
representative who places the product onto the EC market to decide
which Directive(s) apply and to ensure the CE marking is affixed by
the dates stated in the relevant directive(s)
79
Ingress protection
The Ingress Protection (IP) for all low voltage enclosures up to The second character numeral indicated the degree of protection
1000 V a.c. and 1500 V d.c. is defined in identical fashion by the provided by the enclosure with respect to harmful ingress of water;
standards EN 605 29 - IEC 529 it comprises the letters IP followed by a third character may be used to indicate mechanical strength. An x
two character numerals: signifies that no test has been carried out.
IP Description IP Description
0 Non-protected 0 Non-protected
Protected against solid objects greater Protected against dripping water when
2 2
than 12.5mm tilted up to 15º
Description
A Protected against access of the back of the hand
B Protected against access of a finger
C Protected against access of a tool - ø 2.5mm
D Protected against access of a tool - ø 1mm
Description
H High voltage material
M Movements during water test
S Stationary during water test
W Bad weather
80
Circuit diagram
Intermediate Switch
Dimmer Switch
Fan control
81
Circuit diagram
Double Pole Control Switch Double Pole Control Switch with Neon
Double Pole Control Switch 20AX Double Pole Control Switch 20AX
with Neon + 10AX without Neon + 20AX with Neon
82
Circuit diagram
C L1 C L1
C L1 C L1
L2 L2
LED
L1 L1
C C
LAMP
L2 L2
LOOP LOOP
LED LED
600W 1 gang large dolly dimming 400W 2 gang large dolly dimming
Switch with Neon (cycle action) Switch with Neon (cycle action)
LAMP
LAMP LAMP
600W
250V~
83
Circuit diagram
1 Yellow 1 Yellow
2 Green 2 Green
3 Red 3 Red
4 Brown 4 Brown
Jack Pin A B
Jack Pin A B
84
Circuit diagram
Hotel range
LAMP
IN OUT
Load L
Hotel range
"DND" & PLS CLEAN UP" indication box with door bell
Motion detector
85
IP 66 isolator
2 pole
Reference Current H W D
JG220U 20 A 170 84 87
JG232U 32 A 170 84 87
JG240U 40 A 170 84 87
JG220U 63 A 170 84 87
• All dimensions are in mm
OFF
3 pole
Reference Current H W D
JG320U 20 A 170 84 87
JG332U 32 A 170 84 87
JG340U 40 A 170 84 87
• All dimensions are in mm
ON
2 pole
Reference Current H W D
JG220IN 20 A 170 84 87
JG232IN 32 A 170 84 87
JG240IN 40 A 170 84 87
JG220IN 63 A 170 84 87
• All dimensions are in mm
3 pole
Reference Current H W D
JG320IN 20 A 170 84 87
JG332IN 32 A 170 84 87
JG340IN 40 A 170 84 87
• All dimensions are in mm
86
Notes
IP 66 isolator
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
87
Notes
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
88