Professional Documents
Culture Documents
AOC4518R0v06 - 2.12.1 - 27 - 65 - RET Datasheet
AOC4518R0v06 - 2.12.1 - 27 - 65 - RET Datasheet
D8X-690-862/880-960/690-960/1427-2690/4x(1695-2690)-8x65-
16i/16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R
EasyRET 3L5H 16-Port Antenna with 8 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 - 862 690 - 960
Frequency range (MHz) 880 - 960
690 - 803 790 - 862 690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45° +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
at mid Tilt 15.4 16.0 16.5 15.8 16.4 16.7 16.9
Gain (dBi)
over all Tilts 15.2 ±0.5 15.9 ±0.5 16.2 ±0.5 15.6 ±0.5 16.3 ±0.5 16.5 ±0.5 16.7 ±0.5
Side lobe suppression for first side
>15 >15 >16 >15 >15 >16 >16
lobe above main beam (dB)
Horizontal 3dB beam width (°) 70 ±5 69 ±4 64 ±4 70 ±5 69 ±4 68 ±3 64 ±4
Vertical 3dB beam width (°) 8.3 ±0.5 7.4 ±0.4 6.4 ±0.3 9.0 ±0.5 8.0 ±0.4 7.7 ±0.5 7.2 ±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio , ±30° (dB) > 22 > 24 > 25 > 22 > 24 > 24 > 25
Cross polar ratio (dB) 0° > 20 > 24 > 24 > 20 > 24 > 24 > 24
Max. power per input (W) 400 (at 50℃ ambient temperature)* 500 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Electrical Properties
1427 - 2690 4 x (1695 - 2690)
Frequency range (MHz)
1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45° +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
at mid Tilt 16.2 17.3 17.4 17.9 18.0
over all Tilts 16.1 ±0.5 17.2 ±0.5 17.3 ±0.5 17.8 ±0.5 17.9 ±0.5
at mid Tilt 16.6 17.0 17.2 17.7
Gain (dBi) Bottom
over all Tilts 16.5 ±0.5 16.9 ±0.5 17.1 ±0.5 17.5 ±0.5
at mid Tilt 16.7 17.1 17.2 17.7
Top
over all Tilts 16.6 ±0.5 17.0 ±0.5 17.1 ±0.5 17.5 ±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 17 > 17 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3dB beam width (°) 62 ±7 61 ±7 62 ±6 58 ±5 58 ±5 61 ±5 61 ±5 59 ±4 58 ±4
7.9 ±0.4 6.6 ±0.4 5.8 ±0.3 5.2 ±0.3 4.8 ±0.2
Vertical 3dB beam
Bottom 7.6 ± 0.5 6.7 ± 0.4 6.0 ± 0.3 5.4 ± 0.3
width (°)
Top 6.5 ± 0.5 5.8 ± 0.4 5.2 ± 0.3 4.8 ± 0.3
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio , ±30° (dB) > 25 > 28 > 28 > 28 > 28 > 25 > 25 > 25 > 26
Cross polar ratio (dB) 0° > 15 > 18 > 16 > 16 > 15 > 20 > 18 > 17 > 18
Max. power per input (W) 250 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
1
AOC4518R0v06
D8X-690-862/880-960/690-960/1427-2690/4x(1695-2690)-8x65-
16i/16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R
EasyRET 3L5H 16-Port Antenna with 8 Integrated RCUs - 2.6m
1873
2769
Operational temperature (℃) -40 .. +65
Frontal: 1370 (at 150 km/h)
Wind load (N) Lateral: 390 (at 150 km/h)
Rear side: 1305 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 16 x 4.3-10 Female
Connector position Bottom
Accessories
Item Model Description Weight Units per antenna
2
AOC4518R0v06
D8X-690-862/880-960/690-960/1427-2690/4x(1695-2690)-8x65-
16i/16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R
EasyRET 3L5H 16-Port Antenna with 8 Integrated RCUs - 2.6m
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching
function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
HWMxxx………Lr2
LTy2 RTy5
HWMxxx………Lr1
Cy3
HWMxxx……LBy1
h g
HWMxxx……..Cy3 LBy1 RBy4
HWMxxx……RBy4
Lr1 Lr2 Rr3
HWMxxx……...Rr3
g HWMxxx……RTy5
h HWMxxx……LTy2
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 3 Issue: 2017-08-31