Professional Documents
Culture Documents
DXXXXX-690-960/1427-2690/1695-2200/2490-2690/1695-2690-
65/65/65/65/65-15i/17.5i/17i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
690 - 960 (r1) 1427 - 2690 (Ry3)
Frequency range (MHz) 690 - 790 - 824 - 880 - 1427 - 1695 - 1920 - 2200 - 2490 -
803 862 894 960 1518 1990 2200 2490 2690
Polarization +45° , -45° +45° , -45°
Electrical downtilt (°) 0 - 14, continuously adjustable 2 - 12 , continuously adjustable
at mid Tilt 14.0 14.4 14.6 14.9 15.8 17.3 17.4 17.6 17.9
Gain (dBi) 14.0 14.4 14.6 14.8
over all Tilts 15.7 ±0.5 17.1 ±0.5 17.2 ±0.5 17.4 ±0.4 17.7 ±0.5
±0.4 ±0.5 ±0.5 ±0.4
1LnH Band
4-12 ports
Side lobe suppression for first
> 17 > 17 > 16 > 16 > 15 > 17 > 17 > 16 > 16
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 67 ±2.0 66 ±3.0 64 ±3.0 61 ±4.0 74 ±6.0 69 ±5.0 68 ±5.5 64 ±5.0 60 ±4.0
15.3
Vertical 3dB beam width (°) 13.6 ±2.0 13.2 ±0.7 12.2 ±0.8 8.0 ±0.4 6.5 ±0.6 5.9 ±0.5 5.1 ±0.4 4.8 ±0.4
±2.0
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio , ±30° (dB) > 22 > 23 > 24 > 24 > 22 > 24 > 24 > 26 > 24
Cross polar ratio (dB) 0° > 20 > 20 > 20 > 20 > 18 > 20 > 20 > 20 > 17
Max. power per input (W) 500 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC Ground DC Ground
Electrical Properties
1695 - 2200 (b1) 1695 - 2690 (Cy2)
2490 - 2690
Frequency range (MHz) 1695 - 1920 - 1920 -
(Ly1) 1695 - 1990 2200 - 2490 2490 - 2690
1990 2200 2200
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
at mid Tilt 16.9 17.5 18.0 17.3 17.5 17.8 17.9
Gain (dBi)
over all Tilts 16.7 ±0.5 17.2 ±0.5 17.7 ±0.5 17.1 ±0.5 17.3 ±0.5 17.6 ±0.4 17.7 ±0.5
Side lobe suppression for first
> 16 > 17 > 16 > 16 > 16 > 16 > 17
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 69 ±5.0 66 ±5.0 58 ±5.0 63 ±5.0 62 ±6.0 58 ±5.3 58 ±5.1
Vertical 3dB beam width (°) 6.4 ±0.5 5.8 ±0.5 4.6 ±0.3 6.5 ±0.6 5.8 ±0.5 5.1 ±0.4 4.8 ±0.3
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio, ±30°(dB) > 23 > 26 > 24 > 27 > 28 > 28 > 26
Cross polar ratio (dB) 0° > 22 > 21 > 20 > 22 > 19 > 17 > 21
Max. power per input (W) 250 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
105
APE4518R37v06
DXXXXX-690-960/1427-2690/1695-2200/2490-2690/1695-2690-
65/65/65/65/65-15i/17.5i/17i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 1.4m
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1499 x 369 x 149
Packing dimensions (H x W x D) (mm) 1790 x 435 x 240 106
Antenna weight (kg) 26.3
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 38.4 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
1381
1499
Operational temperature (℃) -40 .. +65
Frontal: 425 (at 150 km/h)
Wind load (N) Lateral: 140 (at 150 km/h)
Maximum: 510 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 10 x 4.3-10 Female
Connector position Bottom
Accessories
Item Model Description Weight Units per antenna
106
APE4518R37v06
DXXXXX-690-960/1427-2690/1695-2200/2490-2690/1695-2690-
65/65/65/65/65-15i/17.5i/17i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 1.4m
1LnH Band
4 x 8 pin connector according to IEC 60130-9
4-12 ports
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)s)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032(Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
HWMxxx……Ly1
HWMxxx……..b1
b1 Ly1 Cy2 Ry3
HWMxxx……..r1
HWMxxx……Cy2
HWMxxx……Ry3 r1
107