Professional Documents
Culture Documents
SUPER-FLO
®
DRAG CONVEYORS
RELIABLE
RESPONSIVE &
DECADES OF KNOW-HOW
Since 1932
SUPER-FLO
®
DRAG CONVEYORS
OFFER GENTLE MATERIAL HANDLING
Super-Flo drag conveyors deliver bulk materials gently with Over the years we have discovered unique answers for
a smooth positive action that eliminates damaging materials customers. Super-Flo units are typically supplied with
tumbling and agitation. Since the round bottom design was combination or all steel chain with flights attached.
originated and patented by Screw Conveyor Corporation over
The trough design employed for the Super-Flo continues
45 years ago, this mode of material transport remains a cost
to separate it from all the imitators. The double-flanged,
effective method of handling materials whose composition if
one-piece trough is deeper than a conventional screw
damaged would reduce their value. In a modern era fixated on
conveyor trough providing greater capacity in typical units.
the need for an A/R (abrasive resistant) liner to insure long
When combined with cover and quick release Barron clamps,
life in a flat bottom design, the Super-Flo’s curved troughs
access for inspection and maintenance is simple and easy.
UHMW flights provides years of life at lower annual cost.
Super-Flo when properly applied by a trained Screw
The Super-Flo conveyor over the years has been
Conveyor Corporation Sales Engineer provides a
manufactured from a variety of specialty materials
timeless value.
manufactured to meet the needs of a specific application.
UHMW flights
Copyright © 2015 – Screw Conveyor Corporation, Hammond, Indiana ® Registered Trademark of Screw Conveyor Corporation, Hammond, Indiana
2
SUPER-FLO FEATURES
®
Gentle Material Handling – Materials are carried as a whole Size Range – Super-Flo conveyors come in 10 sizes, from
without tumbling, thereby keeping agitation and friction to 6” through 24”, with capacities from 1890 to 25,765 cu. ft./hr.
a minimum. Particle degradation and separation are also operating at a chain speed to 175 ft./minute.
minimized. Sensitive materials such as pigments, edible
Special Feed Sections – By-pass or pan feeders are available
beans, malt, seed grains, tea and coffee are ideal for Super-
for a wide variety of applications. Manual or electronic control
Flo conveyors.
mechanisms can be used to deal with multiple products with
Self-Cleaning – Super-Flo conveyors are virtually self- densities from 10# to 90# for example.
cleaning, as the flights wipe the trough bottom after
Intermediate Discharges – Intermediate discharge openings
every batch.
are teardrop-shaped rather than rectangular. This shape
Completely Enclosed – Keeps dusting to a minimum. The allows the flights and chain to cross over without the use
addition of battens and bolted covers with gasketed trough of crossover bars or fabricated parts, as well as allowing
flanges can provide further dust-tight construction. For maximum possible discharge. Intermediate discharge
outside weather-tight construction, hip roof bolted covers spouts are furnished with curved slide gates as standard.
with gaskets throughout are available.
Super-Flo Conveyor Economy – Low initial cost and
low power requirements mean a more economical
conveying system now and in the future, especially versus
a screw conveyor.
3
SUPER-FLO
®
SUPER-FLO
TO SUIT CONDITIONS 10'-0" STANDARD SECTIONS
®
DIMENSIONS AND FEATURES
A B M
“Z” STANDARD DIVIDED
L
(INS.) FLOW INLET
N
SH
TO SUIT CONDITIONS 10'-0" STANDARD SECTIONS
A B M
“Z” STANDARD DIVIDED
L
(INS.) FLOW INLET
MATERIAL FLOW
N
P
Z
MATERIAL FLOW C
STANDARD
ROUNDED CONTOUR P
S
TAIL TERMINAL
Z CT
C RA
STANDARD CENTER
ROUNDED CONTOUR
S
AIR OPERATED DISCHARGE GATE WITH CURVED SLIDE,
TAIL TERMINAL
FURNISHED COMPLETE WITH AIR CYLINDER.
(SOLENOID VALVE AND REMOTE CONTROL EQUIPMENT AVAILABLE.)
CENTER IN
AIR OPERATED DISCHARGE GATE WITH CURVED SLIDE,
FURNISHED COMPLETE WITH AIR CYLINDER.
(SOLENOID VALVE AND REMOTE CONTROL EQUIPMENT AVAILABLE.)
(PROJ)
X J W
V T
F C TROUGH
RADIUS
E
U
(DIA.)
TAKE-UP TAIL TERMINAL
(OPTIONAL, USED WITH
FIXED HEAD SHAFT)
DRIVE TERMINAL
WITH DISCHARGE
SUPER-FLO SIZES
Dimensions
in
Inches 6" 9" 12" 14" 16" 18" 20" 24"
F
E
E O O
C TROUGH
RADIUS C C G
5
SUPER-FLO® CONVEYOR WEIGHTS*
Drive Terminal Divided Flow 10' Trough
Contour Terminal
Size with Take Up Inlet Complete Trough Cover
Ga. Ga.
Wt. lbs. Ga. Wt. lbs. Ga. Wt. lbs. Ga. lbs.
6" 61 12 22 14 37 12 167 14 16
9" 86 12 46 12 60 12 258 12 14
12" 192 10 87 10 109 10 393 10 14
14" 212 10 99 10 128 10 438 10 14
16" 250 10 125 10 142 10 484 10 14
18" 394 3/16 181 3/16 215 3/16 529 10 12
20" 460 3/16 222 3/16 280 3/16 677 10 12
24" 574 3/16 340 3/16 360 3/16 761 10 12
*Weights shown are shipping weights with each part containing chain, flights and covers. Supporting structure for
conveyors should be determined using these weights plus weight of material contained in conveyor. Consult our office
for more data if required.
**Capacities and Horsepower figures shown are maximums based on horizontal conveying of a dry, free flowing small
grain weighing 48lb./cu. being conveyed horizontally under favorable conditions with a uniform and continuous in-feed.
Capacity and horsepower will vary with other materials. Consult our offices for data on other materials and for inclined or
reversible units. To convert to bushels, multiply cu. ft. x 0.8. Screw Conveyor Corp reserves the right to make changes in
design or specifications without notice.
SCC does not perform electrical design services and therefore does not supply electrical devices
unless specifically instructed to do so by the purchaser.
SCC will try to assist, to the best of our ability, in the selection of the devices or equipment that will
aid the owner and installer in preparing a safe installation and a safe working place. Zero speed
switches and other electrical devices can sense conveyor operation so that operations can be
interrupted and/or alarms can be actuated.
There are many kinds of electrical interlocking devices for conveyors, elevators and conveyor
systems such that if one conveyor in a system or process is stopped, other equipment feeding it or
following it can also be automatically stopped and thus prevent overloading at transfer points. For
the safety of those that will come into the area where this equipment will be operating we
recommend that you contact an electrical designer and/or supplier. Provide them with information
on your operating conditions so they can best recommend and supply the appropriate devices.
Since 1932 7
Performance proven industrial
bulk material handling
equipment for almost a century.
Technology, reliability and craftsmanship are the
keys to almost 100 years of continued growth. Today,
we’re one of the nation’s oldest manufacturers of
bulk material handling equipment-including screw
conveyors, drag conveyors, vertical lifts and bucket
elevators. At Screw Conveyor Corporation we stand
behind everything we specify, manufacture and
sell…From complete customized bulk material
handling equipment to replacement parts.
Proud Member of
Since 1932
Winona, MS Visalia, CA
P: 662-283-3142 P: 559-651-2131
Guadalajara, México
P: 333-645-7110