Professional Documents
Culture Documents
www.hellamarine.com
ISO 9001
BUREAU VERITAS
Certification
Nº 201297
Hella marine is certified to the international quality standard ISO 9001:2008 for:
‘The Design and Manufacture of Marine Navigation Lighting, General Lighting, LED Based
Lighting and Associated Electronic Control Units.
The Design and Manufacture of Automotive Lighting and Signalling Equipment, General
Lighting, Optical Products and Plastic Components.’
At sea, power is often a scarce resource. Highly efficient and durable LED lighting has a substantial role to play in conserving
energy and enhancing a vessel without sacrificing functionality or compromising safety.
Our vision is to provide world leading products that set benchmarks for quality, reliability, safety and energy efficiency while
satisfying customer expectations for outstanding service and support. Hella marine ‘Fit and Forget’ LED lighting is firmly
established as the solution of choice that meets long term reliability and economic considerations for astute owners and operators.
IP 67 - Completely Sealed
IP 67
COMPLETELY
Preventing moisture from corroding internal LED electronics is vital for long
SEALED
term durability in the harsh marine environment.
Hella marine products are completely sealed and purpose designed for
interior or exterior use, wet or dry.
HD
Heavy Duty Grilamid® Lens
Many Hella marine LED products utilise Grilamid®, a high performance
GRILAMID
R
5 Year Warranty
5 YR
WARRANTY
All Hella marine LED based lighting products carry a Five Year Warranty
providing peace of mind that the product will stand the test of time.
For more information visit: http://www.hellamarine.com/en/about/warranty/
All LED based lighting products supplied by Hella marine carry a Five-Year Warranty from end user purchase
covering faults in materials, components or workmanship, with the exceptions as stated below:
Hella marine NaviLED ® TRIO Tri Colour LED navigation lamps carry a Seven-Year Warranty
Hella marine HID (Xenon) and Halogen based Deck Floodlights carry a One-Year Warranty.
Hella marine bulb based interior and exterior lamps and products listed in the accessories section of this
catalogue carry a One-Year Warranty.
In the unlikely event that you should experience a confirmed warranty related problem with your purchase, Hella marine
will, at its discretion, either repair, replace or refund the purchase price of the product.
Warranty services may be obtained by returning the product within the warranty period to the Hella dealer where the
product was originally purchased.
This warranty is in addition to and does not preclude any other rights or remedies available to the consumer under any
local legislation related to the provision of goods or services.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Accessories 109
LED Deck Floodlights 29 Fans 110
LED Mega Beam 32 Light Dimmer 111
LED Module 70 33 Battery Switches 112-114
LED Sea Hawk 34 Voltage Sensitive Relay 113
LED Sea Hawk XL 36 Switch Panels 115
LED AS 5000 38 Marine Grade Switches 116-117
LED Pilot Lamps 117
Rocker Switches 118
Super Seal Connectors 119
Magcode Power Systems 120
Plugs and Sockets 121
HID (Xenon) and Halogen Deck Floodlights 41 Relays 122-125
Xenon HID Floodlights 43 Crimp Terminals 126-127
Halogen Floodlights 44-49 Tools 128
Masthead / Deck Floodlights 50-52 Cable Ties 129
Search Lights 53 Blade Fuse Boxes 130
Hand Held Spot Lights 54 Circuit Breakers and Fuses 131
Bilge Pumps 132
E.g.; The IP rating of the 8517 series deck floodlight is listed as IP 6K 9K.
This means dust tight and protected from high pressure cleaning.
IP 6K 9K First numeral
– Protection against the ingress of solid foreign objects (table 1)
Second numeral
– Protection against the ingress of water (table 2)
Table 1: Table 2:
Protection against the ingress of solid foreign Protection against the ingress of water
objects (including dust)
Dependng on function, All Round Lamps may output white, red or green light.
Side Lights
A green light on the starboard side (Starboard lamp) and a red light on the port side
(Port lamp) each showing an unbroken light over an arc of the horizon of 112.5 degrees
and fixed to show the light from right ahead to 22.5 degrees (2 points) abaft the beam.
On a vessel less than 20 meters in length sidelights may be combined into one lamp (a
‘Bi-Colour’ Lamp) carried on the fore and aft centre line of the vessel.
Stern Lamp
A white light placed as close as practicable to the stern showing an unbroken light over
an arc of the horizon of 135 degrees and so fixed to show the light from right aft for 67.5
degrees (6 points) on both sides of the vessel.
Towing Lamp
A yellow light placed in a vertical position above the stern lamp showing an unbroken light
over an arc of the horizon of 135 degrees and so fixed to show the light from right aft for
67.5 degrees (6 points) on both sides of the vessel.
Masthead Lamp
A white light placed over the fore and aft centre line of the vessel showing an unbroken
light over an arc of the horizon of 225 degrees and fixed to show the light from right
ahead to 22.5 degrees (2 points) abaft the beam on both sides of the vessel.
International Standards
Hella marine navigation lamps comply with the International Regulations for Prevention of
Collisions at Sea (IMO COLREG 72).
This IMO compliance, together with supplementary national requirements, is listed with
each navigation lamp series throughout the catalogue.
Approved by the German BSH (Bundesamt für Seeschifffahrt und Hydrographie) and
carry BSH type approval numbers.
BSH was formerly called DHI (Deutsches Hydrographisches Institut).
Complies with ABYC (American Boat and Yacht Council) Navigation Lamp
Standard A-16.
Approved under the Marine Equipment Directive (MED) 96/98/EC last modified by
directive 208/67/EC for use throughout Europe in all EC member states for both
pleasure and commercial vessels.
For vessels less than 50 meters in length overall, IMO COLREG 72 describes the following
minimum visible distances for navigation lamps. Supplementary national approvals may also apply.
IMO COLREG requirements for navigation lighting on powerboats less than 50m LOA (Length Overall).
Note - Sailboats under motor adopt the rules for Powerboats.
1 All Round White lamp 1 All Round White lamp 1 All Round White lamp
1 Port lamp 1 Bi-Colour lamp
1 Starboard lamp
A vessel less than 50m engaged in A vessel less than 50m engaged in
trawling fishing, other than trawling
In addition to Port, Starboard and Stern lamps 1 All Round Red lamp In addition to Port, Starboard, Masthead and
1 Towing lamp mounted above the stern lamp 1 All Round White lamp Stern lamps
2 Masthead lamps in a vertical line 1 All Round Red lamp 1 All Round White lamp
(When the tow length exceeds 200m, three mounted above one another 1 All Round Red lamp
Masthead lamps in a vertical line) mounted above one another
10
IMO COLREG requirements for navigation lighting on sailboats less than 50m LOA (Length Overall).
Note - Sailboats under motor adopt the rules for Powerboats.
Sailboats up to 20m under sail Sailboats up to 20m under sail Sailboats more than 20m under sail
1 Tri-Colour lamp
Sailboats and Powerboats more than Sailboats and Powerboats more than Sailboats and Powerboats more than
12m grounded 12m not under command 12m manoeuvring with difficulty
1 All Round White lamp In addition to Port, Starboard and Stern lamps In addition to Port, Starboard and Stern lamps
2 All Round Red lamps 2 All Round Red lamps 1 All Round Red lamp
mounted above one another mounted above one another 1 All Round White lamp
1 All Round Red lamp
mounted above one another
11
Wheelmark Approval
Wheelmark certified Hella marine LED navigation lamps are approved throughout Europe in all EC
member states for both pleasure and commercial vessels.
Wheelmark approvals replace the previously required certificates of the national authorities with the
aim of ensuring that the equipment meets a common standard of safety and performance valid in
every member state of the EU.
A predominant safety requirement of EN 14744 for LED navigation lights is the monitoring and
control of light output deviations caused by service life conditions. The Hella marine solution is a
sophisticated self control and diagnostic electronics integrated into each single-function Wheelmark
certified NaviLED®PRO LED navigation lamp.
The electronics check and measure each lamp ensuring light intensity, and consequently the lamp’s
visibility performance, permanently correspond to the visibility requirements of the norm for ongoing
safety and reliability at sea.
The MED certification of each Hella marine NaviLED®PRO series lamp can be recognized by the
symbol of a ship’s wheel (Wheelmark) engraved onto the top section of the shroud, and also onto
the top section of the lens.
The MED lists statutory equipment carried and used on ships which are registered under the flags of
the European Union member states which have to meet the international conventions developed by
the International Maritime Organisation (IMO).
Hella marine NaviLED ®PRO Wheelmark LED navigation lamps are type approved and
certified according to the European norm EN 14744 by the German Federal Maritime and
Hydrographic Agency (BSH) for German inland waterways and the open sea.
To ensure long term safety at sea, each single-function NaviLED®PRO BSH navigation lamp is
equipped with a sophisticated self diagnostic control.
A photometrical self-test is carried out by the lamp in periodic intervals. If the light output, and
consequently the visibility, reaches a pre-determined value, the lamp activates ‘Service Mode’.
Service Mode is indicated by the lamp flashing at a rate of 60 flashes per minute for 15 seconds as
soon as the lamp is switched on. This will occur for 15 seconds every time the lamp is switched on
until the unit has operated for 2000 hours.
After 2000 hours the Service Mode flash rate doubles to 120 flashes per minute for 15 seconds as
soon as the lamp is switched on.
To ensure the lamp meets the light output criteria of its certification, Hella marine recommends the
light module be replaced as soon as it enters this 2000 hour Service Mode stage.
The 2000 Service Mode flash rate should not occur earlier than tens of thousands of hours. By
regular recreational boating standards, even with regular night sailing, this stage will hardly ever be
reached.
12
Hella marine LED based navigation lamps provide power saving, highly visible and ultra
durable lighting for reliability and safety at sea.
C-Tick is the Australian & New Zealand EMC compliance mark administered by the Australian
Communications and Media Authority (ACMA) & Radio Spectrum Management (RSM) New Zealand,
and will be transitioning to the RCM mark by 1st March, 2016. Hella marine products will remain
compliant to these requirements throughout the transition period and beyond.
14
BSH COL
RINA
AUSTRALIA
NMSC USCG
A-16 RINA A-1
COL REG
REG 72
72 COL REG 72
LED IP 67 8-28V
COMPLETELY MULTIVOLT TM
HD
GRILAMID
R UV
RESISTANT
7 YR
WARRANTY
SEALED
LENS
NMSC, Maritime NZ
b
b 15
Ultra low current draw Pre-wired with 2.5m of twin core marine cable
NaviLED ®PRO lamps use less than 10% of the High quality cable assemblies for time saving,
power required to run a bulb navigation lamp. completely sealed installations.
Port, Starboard and Stern lamps consume less
than 3.2 watts combined. Internationally certified
Meets the requirements of COLREG, USCG,
No maintenance. Ultra long service life ABYC A-16, RINA, BSH, Wheelmark, NMSC,
Hella marine LED technology has no filaments Maritime NZ.
to break making NaviLED ®PRO lamps extremely
shock and vibration proof for proven reliability and
safety in demanding conditions. LED IP 67 9-33V
COMPLETELY MULTIVOLT TM
HD
GRILAMID
R
SEALED
LENS
MultivoltTM 9-33V DC UV 5 YR
WARRANTY
RESISTANT
Advanced electronics ensure reliable illumination
and lamp protection even under severe voltage
fluctuations and low battery voltages.
Safe and highly visible
Hella marine optics deliver 100% correct light
output and enhance visibility compared to bulb
navigation lamps.
Wheelmark/MED versions incorporate self
diagnostic technology for long term reliability and
safety. Sealed light engine clips into
mounting shroud for an ultra
secure attachment.
Fully sealed for life. IP 67 certified
Each NaviLED ®PRO lamp is a completelysealed
unit. High impact housings ensuredurability
from waves and impact. Ultra heavy duty BSH
versions use high-tech Grilamid ® lens to offer
superior strength in extreme conditions.
Packaging for
aftermarket presentation
NZ
AUSTRALIA
NMSC
c a
COL REG 72
Dimensions
COLREG, USCG, RINA and ABYC A-16 Certified LED Navigation Lamps. a = 87mm / 3.43”
b = 90mm / 3.54”
c = 57mm / 2.25”
d = 50mm / 1.97”
2 Nautical Mile Powerboat and Yacht Lamps 3 Nautical Mile Powerboat Lamps
Lamp Type Visibility Black Shroud White Shroud Lamp Type Visibility Black Shroud White Shroud
Port 2 NM 2LT 959 900-001 2LT 959 900-011 Port 3 NM 2LT 959 900-201 2LT 959 900-211
Starboard 2 NM 2LT 959 908-001 2LT 959 908-011 Starboard 3 NM 2LT 959 908-201 2LT 959 908-211
Stern 2 NM 2LT 959 909-001 2LT 959 909-011 Stern 3 NM 2LT 959 909-201 2LT 959 909-211
** for Powerboats and Sailing Yachts under motor Masthead** 3 NM 2LT 959 940-201 2LT 959 940-211
NaviLED ®PRO Wheelmark lamps are type approved and certified according to the Marine Equipment Directive 96/98/EC for
inland waterways and the open sea in Europe. Each single-function NaviLED®PRO BSH lamp is equipped with a sophisticated
self diagnostic control and optional high-tech Grilamid ® lens for superior strength in extreme conditions.
Port and Starboard Grilamid ® lens versions appear clear when the lamps are OFF.
High Impact Lens for Powerboats and Yachts Grilamid® Lens for Powerboats and Yachts
Lamp Type Visibility Black Shroud White Shroud Lamp Type Visibility Black Shroud White Shroud
Port 2 NM 2LT 959 900-501 2LT 959 900-511 Port 2 NM 2LT 959 900-601 2LT 959 900-611
Starboard 2 NM 2LT 959 908-501 2LT 959 908-511 Starboard 2 NM 2LT 959 908-601 2LT 959 908-611
Stern 2 NM 2LT 959 909-501 2LT 959 909-511 Stern 2 NM 2LT 959 909-601 2LT 959 909-611
Masthead** 3 NM 2LT 959 940-501 2LT 959 940-511 Bi-Colour 2 NM 2LT 959 941-001 2LT 959 941-011
** for Powerboats and Sailing Yachts under motor Masthead** 3 NM 2LT 959 940-601 2LT 959 940-611
Masthead** 5 NM 2LT 959 940-401 2LT 959 940-411
17
With less than 1.5W of power consumption, Fully sealed for life. IP 67 Certified
NaviLED ®360 lamps draw a fraction of the Each NaviLED ® lamp is a completelysealed
energy required to run a conventional 2 nautical unit, highly UV and corrosion resistant.
mile incandescent lamp.
Pre-wired with marine cable
No maintenance. Ultra long service life Quality twin core marine cable assemblies
Hella marine LED technology has no filaments to are used on all lamps ensuring time saving,
break making NaviLED ® lamps extremely shock completely sealed installations.
and vibration proof for reliability and safety in
demanding conditions. Internationally certified
Meets the requirements of COLREG, USCG,
MultivoltTM 9-33V DC ABYC A-16, RINA, NMSC, Maritime NZ.
Advanced electronics ensure reliable illumination
and lamp protection even under severe voltage
fluctuations and low battery voltages. LED IP 67 9-33V
COMPLETELY MULTIVOLT TM
UV 5 YR
RESISTANT WARRANTY
Sealed within the base or aluminium pole, the
SEALED
18
a b
2 Nautical Mile All Round Lamps with surface mount base Dimensions
a = 83mm / 3.27”
Light Colour Visibility Black Base White Base b = 90mm / 3.54”
Dimensions
White 2 NM 2LT 980 910-001 2LT 980 910-011 a = 83mm / 3.27”
b = 90mm / 3.54”
Ø 44 Ø 44
2 Nautical Mile All Round White / Anchor Lamps with fixed pole mount
64 64
Overall Length Visibility Black Base White Base
2LT 959 910-011 Robust fixed pole mount with two counter-sunk holes. 34 34 75 75
2 Nautical Mile All Round White / Anchor Lamps with fold down pole mount
Overall Length Visibility Black Base White Base
90
˚
˚
90
90
Lamp pole can be adjusted through 180 degrees and secured with locking collar.
Removable wedge for different surface cambers.
Ø 58
83
2 Nautical Mile All Round White / Anchor Lamps with plug-in pole mount 935
2LT 959 910-431 Pole plugs into lamp base and is fixed into position with locking collar. Ø30
58
Rubber cap covers hole when pole is removed.
19
Compact
No bulbs, No maintenance. Ultra long service life Sealed light engine clips into
Hella marine LED technology has no filaments to break making mounting shroud for an ultra
NaviLED ® lamps extremely shock and vibration proof for secure attachment.
reliability and safety in demanding conditions.
MultivoltTM 8-28V DC
Advanced electronics ensure reliable illumination and lamp
protection even under severe voltage fluctuations and low
battery voltages.
Mclay 588 Fisherman www.mclayboats.co.nz Safe and highly visible
Hella marine optics deliver 100% correct light output and Rear of lamp clipped into shroud.
enhanced visibility compared to bulb navigation lamps. Single core marine cable.
Internationally certified
Meets the requirements of COLREG, USCG, ABYC A-16, RINA,
NMSC, Maritime NZ.
Rear of lamp clipped into shroud.
2.5m twin core marine cable.
LED IP 67 8-28V
COMPLETELY MULTIVOLT TM
UV 5 YR
RESISTANT WARRANTY
SEALED
20
c ca c a da d d
IMO
BSH IMO
AUSTRALIA
RINA
AUSTRALIA
NMSC USCG
A-16
Voltage Protection
COL
COL REG
REG 72
Spike protected to +500 volts
72 COL REG 72
Dimensions
a = 71mm / 2.80” Reverse polarity protected to -700 volts MARITIME
MARITIME ABYC
b = 53mm / 2.09” RINA
NZ A-16
b
bc = 33mm / 1.30” b Power Consumption Port and Starboard less than 2W combined
d = 50 mm / 1.97” Stern less than 2W, Towing less than 2W
Degree of Protection IP 67 - Completely Sealed
aftermarket presentation Port & Starboard 2 NM 2LT 980 520-901 2LT 980 520-911
21
Deck Mount
LED IP 67 8-28V
COMPLETELY MULTIVOLT TM
UV 5 YR
RESISTANT WARRANTY
SEALED
a a c
Dimensions: Shroud
a = 90.0mm / 3.54”
b = 38.5mm / 1.52” b b
c = 50.0mm / 1.97”
Starboard from starboard side Starboard from top Starboard from bow
Optic Assembly
Packaging for
aftermarket presentation 2 Nautical Mile Powerboat and Yacht Lamps - Clear outer lens
Lamp Type Visibility Black Shroud White Shroud
22
Housing Description UV and impact resistant plastic housing and lens
ABYC MARITIME
RINA A-16 NZ
Material Description UV and impact resistant plastic housing and lens
Minimum Visible Distance 2 Nautical Mile
Bulb 12V / 10W BA15s included
Installation Horizontal surface mount. Includes stainless steel screws 68
Degree of Protection IP 54
Ø 60
Approvals
IMO COLREG, USCG, ABYC A-16, RINA,
NMSC, Maritime NZ
.
24
NMSC
Featuring heavy duty anodized aluminium poles and impact resistant bases, COL REG 72
the 2010 series lamps are also saltwater resistant and non-magnetic.
IMO
COL REG 72
AUSTRALIA
NMSC
MARITIME
NZ
Material Description UV and impact resistant plastic housing and lens.
Anodized aluminium poles BSH IMO
MARITIME
USCG
2LT 995 002-131 NZ
COL REG 72
2 Nautical Mile All Round White / Anchor Lamps with fixed pole mount
Ø 44 Ø 44
2 Nautical Mile All Round White / Anchor Lamps with fold down pole mount
Voltage Overall Length Black Base White Base
90
90
˚
˚
90
90
˚
Lamp pole can be adjusted through 180 degrees and secured at
desired angle with locking collar. Removable wedge for installation
56 56 52 52
2 Nautical Mile All Round White / Anchor Lamps with plug-in pole mount Ø 48
Pole plugs into lamp base and is fixed into position with
Ø30
Lamp housing white Rubber cap white Plug-in base white Fold down base white
9EL 990 157-011 To suit Plug-in base 8HG 992 157-031 8HG 992 158-011
9GH 992 157-051
25
NMSC
'snap lock' housing allowing bulbs to be changed without tools.
IMO
COL REG 72
AUSTRALIA
NMSC
MARITIME
NZ
BSH IMO
MARITIME
NZ
COL REG 72
USCG
ABYC
RINA A-16
Material Description UV and impact resistant plastic housing and lens
Minimum Visible Distance Port and Starboard 1 Nautical Mile
63 53
Masthead and Stern 2 Nautical Mile
Bulb 12V / 10W SV8.5 included
75 Installation Vertical surface mount. Mounting base available
Cable Entry Through base plate with rubber grommet
Degree of Protection IP 54
Approvals
IMO COLREG, USCG, ABYC A-16, RINA,
NMSC, Maritime NZ
.
26
NZ
COL REG 72 NMSC
Degree of Protection IP 55
Approvals
IMO COLREG, BSH, USCG, ABYC A-16, RINA, MARITIME
NZ
NMSC, Maritime NZ
.
IMO
COL REG 72
AUSTRALIA
RINA
NMSC
ABYC
A-16
IMO
MARITIME
NZ
COL REG 72 NMSC
AUSTRALIA
MARITIME
NZ
Material Description UV and impact resistant plastic housing and lens 88
Minimum Visible Distance Port and Starboard 2 Nautical Mile, Stern 2 Nautical Mile
All Round White / Anchor 2 Nautical Mile
Bulb 12V / 25W BAY15d included 107
Approvals
IMO COLREG, BSH, USCG, ABYC A-16, RINA,
. NMSC, Maritime NZ
88
28
1
Hella marine Catalogue HA 2013.indd 29 26/08/2013 1:49:02 p.m.
Introduction
Hella marine LED deck floodlights provide efficient, power saving and ultra durable
illumination for reliability and safety at sea.
C-Tick is the Australian & New Zealand EMC compliance mark administered by the Australian
Communications and Media Authority (ACMA) & Radio Spectrum Management (RSM) New
Zealand, and will be transitioning to the RCM mark by 1st March, 2016. Hella marine products
will remain compliant to these requirements throughout the transition period and beyond.
30
31
MultivoltTM 9-30V DC
Advanced electronics ensure reliable illumination a c
and lamp protection even under severe voltage Dimensions
fluctuations and low battery voltages. a = 110mm / 4.33”
d b = 145mm / 5.70”
Pre-wired with marine cable b c = 83mm / 3.27”
High quality sealed cable assemblies for time saving, d = 120mm / 4.72”
completely sealed installations.
32
LED Module 70
Compact, durable and efficient LED floodlights
MultivoltTM 9-30V DC
Advanced electronics ensure reliable illumination a c
and lamp protection even under severe voltage
fluctuations and low batteryDimensions
voltages.
a = 83mm / 3.27”
d
Pre-wired with marine cable b = 110mm / 4.33” b
c = 74mm for/ 2.91”
High quality sealed cable assemblies time saving,
d = 83mm / 3.27”
completely sealed installations.
s
tre
Me
33
LED Sea Hawk Spot White Light Candela Output Luminous Intensity - Distance / Lux
1080
960 21°
720
LED
480
IP 67 9-33V
COMPLETELY MULTIVOLT TM
HD
GRILAMID
R UV
RESISTANT
5 YR
WARRANTY
SEALED
LENS
360
240
120
friction mounts and can be easily adjusted
up and down without tools. 2m
150 300 Lux 150
−40° −30° −20° −10° 0° 10° 20° 30° −40°
750 mm
Angle
360
connections.
A polished 316 stainless steel bracket allows easy Sea Hawk Candela and Lux performance. Spot
adjustment. Friction mounts hold the lamp steady
LED Sea Hawk
LEDSpot
SeaWhite
HawkLight
SpotCandela Output
White Light Candela Output Luminous Intensity - Distance
Luminous / Lux
Intensity - Distance / Lux
without the need to adjust fastenings. 1200 1200
1080 1080
MultivoltTM 9-33V DC
Advanced electronics ensure reliable illumination 960 960 21° 21°
Intensity (cd)
34
Bracket Mount
a
Dimensions Recess Mount Dimensions
d
a a Dimensions
Dimensions
d d a a c c
a = a176mm
= 176mm / 6.93”
/ 6.93”
Dimensions b = b50mm
= 50mm / 1.97”
/ 1.97”
a c
a = 176mm / 6.93” c = c35mm
= 35mm / 1.38”
b b / 1.38”
ensions a b = 50mm / e1.97”e
e b b b db d = d12mm
= 12mm / 0.47”
/ 0.47”
136mm / 5.35” b b b b c = 35mm / 1.38” e = e42mm
= 42mm / 1.65”
/ 1.65”
ensions b e b d = 12mm / 0.47”
53.0mm / 2.08’’ e e f = f150mm
= 150mm / 5.91”
/ 5.91”
136mm
/ 5.35” / 5.35” e = 42mm / 1.65”
49.0mm / 1.93” g = g132mm
= 132mm / 5.20”
/ 5.20”
53.0mm
/ 2.08’’ / 2.08’’ f f f = 150mm / 5.91” d d
46.0mm / 1.81”
49.0mm
/ 1.93” / 1.93” c b g = 132mm / 5.20”
32.5mm / 1.28” f d b
46.0mm
/ 1.81” /
90.0mm /
1.81”
3.54” f Dimensions Dimensionsg g
a c
32.5mm
/ 1.28” /
123mm /
1.28”
4.84“
c c a = 136mm / 5.35” g g ae = 176mm / 6.93”
90.0mm
/ 3.54” / 3.54” f f b = 53.0mm g b = 50mm / 1.97”
25.0mm /
123mm
/ 4.84“ /
0.98”
4.84“ g/ 2.08’’
c = 49.0mm / 1.93” c = 35mm / 1.38”
25.0mm
/ 0.98” / 0.98” e be e
d =b 46.0mm / 1.81” d = 12mm / 0.47”
e = 32.5mm / 1.28” e e = 42mm / c
1.65”
h f = 90.0mm / 3.54” f f = 150mm / 5.91”
h h g = 123mm / 4.84“
f
g = 132mm / 5.20”
g h = 25.0mm / 0.98” d
g g
g
g
h
0670 Series Bracket Mount e
g
White Light LED Floodlights - Spread
Voltage Housing Colour Part Number
‘Fit and forget’ for a long service life Engineered light patterns
Each lamp is completelysealed and every aspect, Sophisticated optics deliver a broad and even
material and component is carefully chosen to illumination without glare or harsh point sources.
ensure longevity in the most demanding offshore Spread lamps illuminate a wide, close-range spread
conditions without compromise. over a cockpit, foredeck or working area. Spot lamps
provide a narrower, more concentrated illumination
Hi-tech materials suitable for yacht masts or to determine objects in the
The lens is precision moulded from high water during low speed docking.
performance Grilamid® for strength and durability.
The housings are injection molded from a MultivoltTM 9-33V DC
revolutionary thermally conductive polymer that is Advanced electronics ensure reliable illumination and
highly resistant to degradation, even under harsh lamp protection even under severe voltage fluctuations
UV. and low battery voltages.
Riviera 63FB www.riviera.com.au
This advanced material draws heat away from
internal electronics for reliable long-term operation. Pre-wired with three core marine cable
Utilising thermal polymer eliminates the requirement High quality sealed cable assemblies for time saving,
for an external aluminium heat sink in this class of completely sealed installations.
floodlight, removing potential surface deterioration
and material corrosion risks associated with coated Designed and manufactured in New Zealand
aluminium in the harsh marine environment. Sea Hawk XL lamps carry a 5 year warranty.
Integrated Dimming
A unique high/low light intensity function is LED IP 67
COMPLETELY
HD
GRILAMID
R
9-33V
MULTIVOLT TM
SEALED LENS
+ve 2 = Low
960 76°
720
480
360
240
Intensity (cd)
120
e Dimensions
a = 170mm / 6.69”
b = 68mm / 2.68”
e d c = 58mm / 2.28”
b b d = 55mm / 2.17”
e = 120mm / 4.72”
g f = 154mm / 6.06”
g = 30mm / 1.18”
f g
9-33V DC g
Black Housing 2LT 980 950-001
9-33V DC White Housing 2LT 980 950-011
f
s
tre
Me
Warm White Light LED Floodlights - Spread
Voltage Housing Colour Part Number
37
AS 5000 LED
High Performance
Ultra Durable
No compromise
Heavy duty floodlights offering over 5000 lumens
for the harshest environments.
2.5A@24V DC).
MultivoltTM 9-33V DC
Advanced electronics ensure reliable illumination
and lamp protection even under severe voltage
fluctuations and low battery voltages.
A reduced power mode activates below 11.6V to
prevent battery drain when lights are on but the
charging system may not be operating.
The 316 stainless steel adjustable
bracket holds the lamp to withstand
harsh vibration and impact.
38
AS 5000 Wide Beam Floodlight Candela Output Luminous Intensity - Distance / Lux
30,000
44°
25,000
20,000
10,000
Intensity (cd)
5,000
2,500
2,375 4,750 Lux 2,375
2m 1,530 mm
−40° −30° −20° −10° 0° 10° 20° 30° −40°
Angle
AS 5000 Narrow Beam Floodlight Candela Output Luminous Intensity - Distance / Lux
30,000
25,000
24°
20,000
White Light LED Floodlight - Wide Beam White Light LED Floodlight - Narrow Beam
Voltage Housing Colour Part Number Voltage Housing Colour Part Number
10,000
Accessories for AS 5000 Series Dimensions
Description Part Number L 200mm / 7.87’’
100W 24V IP 67 AC-DC Power Supply 8ES 910 345-041 W 68mm / 2.68’’
Intensity (cd)
5,000
2.5m cable with DT Plug 9.1549.05 H 40mm / 1.58’’
2,500
40
41
1
Hella marine Catalogue HA 2013.indd 41 26/08/2013 1:50:43 p.m.
Deck Floodlights
Introduction
HID Deck Floodlights differ from traditional bulb versions. Instead of light being created
by passing current through a filament to make it glow, light is created by an arc in a tube
filled with a mixture of xenon gas and metal salts. The light arc is shock proof as there
is no filament to break.
A compact 12V or 24V DC electronic ballast is used to ignite the HID bulb and provide
constant levels of light output, even if the vessel’s voltage supply fluctuates by up to 10%.
The advantages of using Xenon Gas Discharge (HID) deck floodlights in comparison to
halogen versions include:
• 2.5 times the luminous flux (light output) and 35% less power consumption.
• Increased luminance results in a brighter and larger illumination of working areas.
• Light spectrum is similar to daylight – for natural colour reproduction of the
environment.
• Vibration resistant light arc instead of a fragile filament.
• Service life up to five times longer – reduced expenditure for bulb replacement.
• Constant brightness – independent of fluctuations of up to 10% in the supply voltage.
• Only 42W power consumption – less strain on the vessel's power supply.
•C
omplete the electrical connection only with the wiring harness supplied. When
extending the wiring harness, sufficient cross section must be ensured.
The internal resistance of the electrical connection (including relay, fuse and
earth lead) between ballast and battery must not exceed 150W (for 12V) or
300W (for 24V) under all circumstances. If the resistance is higher, the current
of 20A (for 12V) or 10A (for 24V) required for ignition of the light arc cannot be
reached. Inefficient ignition use can cause damage to the electronic ballast.
• Ignition problems can occur when a number of Xenon lamps are started
simultaneously. This can result in damage to the electronic ballasts.
For this reason it is strongly recommended to activate the lamps sequentially
with a short time delay of approximately 5-20 seconds depending on the
vessels electrical system.
More light, greater safety, less power consumption, longer life and proven reliability in
tough working conditions.
Hella marine HID floodlights use a D2S Xenon bulb that provides up to 5 times the service life of
a traditional halogen bulb. Due to advanced ‘Free Form’ reflector technology, Hella marine HID
floodlights have 2.5 times the light output of halogen floodlights.
HID floodlights produce a white light very close to daylight, with a greater range and extremely
wide deck illumination. The safety benefits of increased natural white light include easier viewing in
dark working conditions and dramatically reduced eye strain.
A compact 12V or 24V DC electronic ballast provides constant levels of light output, even if the
vessel’s voltage supply fluctuates by up to 10%.
In addition, HID floodlights place less strain on the vessel's electrical system than halogen deck
floodlights - total consumption is 42W - 35W for the bulb, 7W for the ballast.
Me
t res 24V DC 18 - 32V
6142 Series HID Deck Floodlights with Integrated Ballast Spare Parts
Voltage Housing Colour Part Number 9.1536.01
Close range insert
12V White Housing 281536
24V White Housing 281538 9.1538.01
163
50
Far reaching insert
160
150
191 62
54
6.5
69.5
27
8534 Series HID Deck Floodlights with Remote Ballast Spare Parts
9.1534.01 'FF' insert
Voltage Housing Colour Part Number
9.1534.03 12V Ballast
12V White Housing 281534 9.1535.03 24V Ballast
24V White Housing 281535 9.1517.08 Bracket
350 93 43
24
101 84
127
120
24
112 140 43
7118 Series
Fibre reinforced housing and Free Form reflector for close
range homogeneous illumination.
154 84
94
104
44
PK22s
12V / 55W YC1255
24V / 70W YC2470
PK22s
12V / 55W (YC1255)
24V / 70W (YC2470)
45
8541 Series
Wide spread close range illumination with double Free Form 158 106
Spare Part
9.1531.01 ‘FF’ insert
109
8542 Series - Recess Mount 187 77
s
tre
Me
46
8517 Series
112 97
White fibre reinforced housing and Free Form reflector for close range
homogeneous illumination.
126
- Hella 'Free Form' reflector technology
- Compact design
- Illuminates large areas of deck or superstructure
- Glass lens bonded with reflector to be dust and moisture resistant
- Sealed cable entry via 2 pin plug Replacement Bulb Type
Spare Part
9.1533.01 ‘FF’ insert
9.6008.05 Rubber boot for AMP connection
9.6008.06 Wiring loom for AMP connection, 2.0m
112
8517 Series - Recess Mount 42
46
White fibre reinforced housing and Free Form reflector for close range
101
homogeneous illumination. 101
47
Spare Part
9.1540.01 ‘FF’ insert
White fibre reinforced housing and Free Form reflector for close range 30 30
homogeneous illumination. Sturdy housing design for use under 105 105
s
tre
Me
48
White fibre reinforced housing and Free Form reflector for close range
homogeneous illumination. Extended front edge to protect the lens. 145
120
Features:
- Extended front edge for lens protection
- Glass lens bonded with reflector to be dust and moisture resistant
- 316 Stainless steel mounting hardware Replacement Bulb Type
- Sealed cable entry via 2 pin plug
PK22s
- Suitable for applications subject to heavy vibration 12V / 55W YC1255
- Upright or pendant mounting. Can be rotated through 130° 24V / 70W YC2470
White fibre reinforced housing and Free Form reflector for close
range homogeneous illumination. 120
Features:
- Glass lens bonded with reflector to be dust and moisture resistant
- Extended front edge for lens protection
Replacement Bulb Type
- Sealed cable entry via 2 pin plug
- Suitable for applications subject to heavy vibration PK22s
12V / 55W YC1255
24V / 70W YC2470
49
NMSC
MARITIME
NZ
Features:
BSH IMO
MARITIME
NZ USCG
- 2 Nautical Mile Masthead lamp
COL REG 72
72
Replacement Bulb Type
Floodlight GX5.3
12V / 20W 8GH 998 529-001
187 154 28V / 20W 8GH 998 529-011
Masthead SV8.5
12V / 10W K1210
132 24V / 10W K2410
s
tre
Me
Floodlight Bulb
12V / 20W 8GH 998 529-001
28V / 20W 8GH 998 529-011
Masthead Bulb
12V / 10W K1210
24V / 10W K2410
50
Features:
IMO RINA
NMSC
AUSTRALIA ABYC
A-16
- 3 Nautical Mile Masthead lamp COL REG 72
NZ
COL REG 72
AUSTRALIA
NMSC
- Illuminates large areas of deck or superstructure
MARITIME
- Glass lens bonded with reflector to be dust and moisture resistant NZ
- All metal parts are stainless steel
- Black or White fibre reinforced housing
205
s
tre
Me
51
8503 Series
111
illumination.
205
Features:
- Hella 'Free Form' reflector technology
- Flexible mounting arms for mounting on a variety of mast profiles Replacement Bulb Type
- Illuminates large areas of deck or superstructure
PK22s
- Glass lens bonded with reflector to be dust and moisture resistant
12V / 55W YC1255
- All metal parts are stainless steel 24V / 70W YC2470
- Compact design
s
tre
Me
8506 Series
Compact and powerful halogen floodlight for mounting under-
neath spreaders. 63
74 68
Features:
- Hella 'Free Form' reflector technology
- Cable entrance through rubber grommet
Replacement Bulb Type
- Halogen reflector lamp (12V / 20W) with protective cover
GX5.3
12V / 20W 8GH 998 529-001
28V / 20W 8GH 998 529-011
Housing Description UV and impact resistant plastic housing
Bulb 12V / 20W GX5.3 included
Mounting Pre-wired with 110mm of cable
Degree of Protection IP X4
Maximum Output 12V / 20W
s
tre
Me
52
154
Features:
- Two reflectors and two halogen bulbs on separate switches
- 55W bulb for close range. 100W bulb for long range (12V Version)
- 2 x 70W bulbs (24V Version)
- Trigger switch integrated into the grip allows morse code operation
Illumination Distance
- Extended front edge for protection of the glass lens
55 W 100W both 70W 2 x 70W
800m
600m
High gloss aluminium reflector
500m
Bulbs 1 x 12V / 55W H3 bulb included
400m
1 x 12V / 100W H3 bulb included
300m
488
Features:
- Two reflectors and two halogen bulbs with a single switch on handle
- Two 12V / 55W or 24V / 70W bulbs
- 360° rotation. 30° vertical adjustment
- Extended front edge for protection of the glass lens
Illumination Distance
Housing Description Shock and vibration resistant plastic
2 x 55W
600m
2 x 24V / 70W H3
500m
Installation Pre-wired with 350mm of cable
400m
Grommet sealed. O-ring included
300m
100m
Spare Parts - Hand Held Search Lights Spare Parts - Fixed Mount Search Lights
1 Insert 1 Insert
1
2 9.2862.01 9.2862.01
9.2862.03
2
Deck mount base
9.2862.08 53
88
Halogen Search Lamp with Remote Control
360° horizontal rotation, 60° vertical tilt.
168
Spare Parts -
9.2865.01 Insert
9.2865.07 Rubber Rim
Features: 134 72
12V 100 Blue Housing 1520 9.1520.07 Spiral Cable and Plug
Spare Parts
Black Search Lights with Momentary ON / OFF Switch
9.1520.07 Spiral Cable and Plug
Voltage Wattage Housing Colour Part Number
9.1524.06 Switch ON / OFF
12V 100 Black Housing 1524
54
LED Technology
Hella marine LED interior, exterior and courtesy lamps provide efficient, power
saving and ultra durable illumination for reliability and safety at sea.
C-Tick is the Australian & New Zealand EMC compliance mark administered by
the Australian Communications and Media Authority (ACMA) & Radio Spectrum
Management (RSM) New Zealand, and will be transitioning to the RCM mark by 1st
March, 2016. Hella marine products will remain compliant to these requirements
throughout the transition period and beyond.
56
Series Name / Outside Installation Cut out Beam Peak Lux Peak Lux Power Incandescent Page
Series Number Diameter Type Diameter Angle @ 1M @ 2M Consumption Equivalent* No.
Ponui 70mm Surface n/a 32° 105 Lux 28 Lux < 0.8W 10W Halogen 70
0770 & 0771 Spread White White < 0.07A@12V
Tiri 60x60mm Recess 50mm 32° 105 Lux 28 Lux < 0.8W 10W Halogen 72
0596 & 0597 Spread White White < 0.07A@12V
Tiri 60x60mm Recess 50mm 15° 370 Lux 92.5 Lux < 0.8W 10W Halogen 72
0596 & 0597 Spot White White < 0.07A@12V
SpotLED 75mm Recess 50mm 13° 450 Lux 112.5 Lux < 2.5W 10W Halogen 74
3980 Spot White White < 0.21A@12V
Rakino 75mm Recess 50mm 32° 105 Lux 28 Lux < 0.8W 10W Halogen 72
9599 & 0956 Spread White White < 0.07A@12V
Rakino 75mm Recess 50mm 15° 370 Lux 92.5 Lux < 0.8W 10W Halogen 72
9599 & 0956 Spot White White < 0.07A@12V
EuroLED® 95 95mm Recess 73mm 30° 380 Lux 95 Lux < 4.0W 20W Halogen 76
0940 Spread Warm white Warm white < 0.33A@12V
EuroLED® 115 115mm Recess 90mm 36° 385 Lux 96 Lux < 4.0W 20W Halogen 78
0820 & 0828 & Surface Spread Warm white Warm white < 0.33A@12V
EuroLED® 130 130mm Surface n/a 32° 475 Lux 119 Lux 4.0W 20W Halogen 82
9820, 9950/51 Spread White White 0.33A@12V
EuroLED® 150 150mm Recess 124mm 32° 475 Lux 119 Lux 4.0W 20W Halogen 80
0630 & 0631 & Surface Spread White White 0.33A@12V
Waiheke 250x50mm Recess 240x40mm 26° 450 Lux 112.5 Lux < 2.0W 20W Halogen 68
0681 & 9076 Spot White White < 0.17A@12V
Surface Mount 285x25mm Surface n/a 42° 205 Lux 51 Lux < 3.0W 20W Halogen 90
0881 Interior Spread White White <0.25A@12V 7W Fluorescent
DuraLed® 12 140x65mm Surface n/a 120° 60 Lux 15 Lux < 2.5W 20W Halogen 92
9700 & 0704 Spread White White <0.20A@12V 7W Fluorescent
DuraLed® 20 177x100mm Surface n/a 64° 390 Lux 97.5 Lux < 4.0W 20W Halogen 94
0608 Spread White White <0.33A@12V 11W Fluorescent
DuraLed® 36 177x100mm Surface n/a 64° 600 Lux 150 Lux < 7.0W 35W Halogen 94
9037 Spread White White <0.51@12V 14W Fluorescent
DuraLed® 50 220x96mm Surface n/a 64° 780 lux 195 Lux < 10.0W 50W Halogen 94
0604 Spread White White <0.80A@12V 18W Fluorescent
57
58
59
60
Light Output
For an effective comparison of the different
products from marine LED manufacturers, many
factors must be considered. The best lamp for
a given application is no longer the one that
solely meets a style requirement. Today, power
consumption, efficiency, output and beam angle
must be considered together with light colour,
shape, and the aesthetics and finish of the
housing itself.
Enhancing interiors with attractive colour matched illumination. The following performance data is worth
considering -
Hella marine offers highly efficient LED lamps with colour temperatures in the warm white
range of 3000K, or white range of 5000K. Luminous Flux
Specialist LED selection and quality control ensures the colour temperature and colour Measured in Lumens (lm), luminous flux
rendering performance is matched across similar series. The result is a uniform colour describes the total quantity of light produced
temperature and ambience throughout a vessel when different lamps are installed. from a lamp. The higher the lumen count, the
more intense the light output.
Warm White White
Luminous intensity
Measured in Candela (cd), luminous intensity is
EuroLED ® 115 EuroLED ® 115 the luminous flux at a particular angle from the
0820 series 0820 series light source. Peak candela occurs at 0 degrees,
i.e. directly below a lamp.
Illuminance
Measured in Lux (lx), Illuminance is equal to
luminous flux divided by the illuminated area.
EuroLED ® 95 EuroLED ® 95
One lux is equal to one lumen per square meter.
0940 series 0940 series
61
EuroLED®
EuroLED115mm Warm
115 Warm White
White Light
Light Candela
Candela Output
Output Luminous Intensity
Luminous - Distance
Intensity / Lux
- Distance / Lux
500
450
36°
400
350
300
200
150
100
Intensity (cd)
50
62
450
Hella marine 9599 series LED downlight (Spread) Efficacy
Compared to 8508 series halogen downlight. Like efficiency, the efficacy of an LED lamp
400
500 is the amount of light it produces per unit of
electrical power it consumes (lumens per
500
350
LED Downlight watt). The higher the lumens per watt, the
450 higher the efficiency.
450 Power consumption
300
0.8 Watts E.g. A single Hella marine 9599 series white
400
400 LED downlight consumes less than 0.8W and
250 produces around 80 lumens. 80 / 0.8 = 100
350 350 lumens per watt.
200
300 300 It may also be an interesting comparison to
divide the luminous flux of a lamp by its cost
150 to derive lumens per dollar. The more lumens
250
250
per dollar (flux per bucks), the more light for
100
your investment.
200
200 Also, it is important to determine that the
Intensity (cd)
Halogen Downlight
efficacy of the LED lamp is measured as the
150 Power consumption
50 devices total efficacy, not the efficacy of only
150
10 watts the LED(s) employed. Power consumed to
100
run an electronic power supply driving and
Intensity (cd)
−40° −30° −20° −10° 0° 10° 20° 30° −40° controlling the LED(s) is always a contributor
100
50 Angle to the lamps total consumption.
Intensity (cd)
50
Heat reduction and thermal
−40° −30° −20° −10° 0° 10° 20° 30° −40°
Angle
management
With the power saving benefits of efficient
−40° −30° −20° −10° 0° 10° 20° 30° −40°
LED based devices also comes heat reduction
Angle
benefits. The sometimes dangerously high
temperatures of 10W and 20W halogen lamps
Southstar 37 www.salthouseboats.com
onboard can be eliminated with high efficiency
LED technology. This allows boat builders
and designers a wide scope of installation
possibilities where the air cavity behind
incandescent lamps, traditionally reserved for
cooling, is no longer required. Efficient LED
lamps can be mounted into solid surfaces and
composite structures without risk of fire or
heat damage to surrounding materials.
63
EuroLED ® series
Hella marine thermal management expertise,
Lens and Optic engineering
coupled with proven optics and electronic design,
Precision engineered lens and optic ensures the long term durability with minimal
combinations on powerful single LED degradation over many years of service.
lamps such as the 0630 and 0631
series EuroLED® lamps are essential Lens and Optic Technology
for efficient performance. To maximise the ever increasing efficacy of
The optics work to efficiently capture advanced LEDs, efficient optic design is essential to
and distribute light from a highly intense capture and spread the available light and to evenly
single point source and provide a wide illuminate areas on board.
and uniform light pattern without glare
or eye discomfort. Unlike incandescent light sources, LED devices
begin with a directional light pattern. The goal
for optics designers, working an application such
as interior down lighting, is to create optics and
lens patterns that produce an effective spread of
homogeneous illumination throughout the interior.
This even spread of light is often more important
than how intense a lamp looks when viewed straight
on.
All Hella marine LED lamps use efficient optics,
lens designs or Free-Form reflector technology to
accurately capture and distribute large percentages
of available light from the LED source(s).
Examples include:
- Oblong LED step lamps with a 30 degree down
angle light beam to illuminate the tread of steps and
stairs without dazzle from the lamps themselves.
- Round and Square LED courtesy lamps providing
attractive uniform light patterns via an efficient optic
and lens with embedded glass spheres for minimum
light losses.
Tiara 4200 www.tiarayachts.com
64
Costs
Quality LED interior and exterior lamps have
shifted lighting systems from an incandescent
globe based inside a housing or reflector to
complex engineered optoelectronics devices.
These devices now incorporate advanced drive
circuits, spike and over voltage protection, optics,
lenses, plus the LED source itself.
As a result, the added features and benefits
of effective LED lighting do carry higher costs
compared to incandescent lamps. However,
for many applications the substantial power
savings, long term reliability and improved safety
advantages are a convincing value proposition
for astute owners and operators.
Night Vision
- Why red light does not affect
our night vision.
Both lamp series are purpose designed for surface mounted installations and feature unique heavy
duty fastening components. The fastening load is taken up by pairs of robust nylon bushs to eliminate
possible stress on lamp housings.
Completely sealed
housings with robust
mounting system.
DuraLED ® EuroLED ®
66
Energy efficient lighting for a variety of interior applications including chart table and navigation area
lighting, berth lighting and adjustable reading lights.
Available in single red or white LED light or dual colour red and white LED versions with integrated
dimming via a rotary switch built into the head.
LED 9-33V
9-31V
MULTIVOLT TM
UV 5 YR
WARRANTY
RESISTANT
c
c
Housing Description UV and impact resistant plastic
d
d
Arm material Single colour - Coated steel arm
Dual colour red/white - 316 stainless steel arm
a
a
a
Cable Pre-wired with 120mm of twin core cable
Operating Voltage MultivoltTM 9-31V DC
Power Consumption < 2W ( <0.16A@12V / <0.08A@24V )
Degree of Protection IP 53
d = 46mm
cd == 36mm
b = 150mm
ab == 104mm
Dimensions
c = 400mm
a = 104mm
Dimensions
b
b
Weight 150mm - 130g (including cable)
46mm
36mm
400mm
150mm
400mm - 230g (including cable)
Approvals CE, C-Tick
/
//
//
//
//
/
1.81”
1.42”
15.75”
5.91”
4.09”
1.81”
1.42”
15.75”
5.91”
4.09”
Dimensions
3720 Series Chart Table Candela and Lux performance. White light.
a = 104mm / 4.09”
b = 150mm / 5.91”
3720 Series Chart Table Lamp White Light Candela Output Luminous Intensity - Distance / Luxa
500 400mm / 15.75”
c = 36mm / 1.42”
450 d = 46mm / 1.81”
d
400 40°
b
350
150
100
Intensity (cd)
50
2m 9 17.5 Lux 9
−40° −30° −20° −10° 0° 10° 20° 30° −40° 1430 mm
Angle
CLEAR
LENS
Packaging for
CLEAR
aftermarket presentation
Shaft Length Black Cover White Cover
450
400 26°
350
300
200
150
100
Intensity (cd)
50
56 112.5 Lux 56
−40° −30° −20° −10° 0° 10° 20° 30° −40° 2m
920 mm
Angle
68
Packaging for
aftermarket presentation
a
ons:
e
d = 28.0mm
e = 20.0mm
/
/
1.10”
0.79” d 12V DC Wide / Stainless
b Rim 2JA 980 681-001
f
24V DC Wide / Stainless Rim 2JA 980 681-501
f = 6.0mm / 0.24”
c
e
a
Dimensions: Multi purpose Warm White LED Strip Lamps
a = 250mm / 9.84” d
e
b
f = 50.0mm / 1.97” Voltage Rim Type / Finish Part Number
c = 218mm / 8.58”
e d = 28.0mm / 1.10” c 12V DC Wide / Stainless Rim 2JA 980 681-101 b
e = 20.0mm / 0.79”
f = 6.0mm / 0.24” 24V DC Wide / Stainless Rim 2JA 980 681-601
d
c = 218mm / 8.58” 12V DC e
No Rim
d
(No gasket) 2JA 980 681-151
d = 26.0mm / 1.02”
e = 20.0mm / 0.79” 24V DC No Rim (No gasket) 2JA 980 681-651
c b
d e d 69
c
Hella marine Catalogue HA 2013.indd 69 26/08/2013 1:53:22 p.m.
Ponui
Timeless brass housings combine with energy Surface finish options include bright chrome, satin
efficient Hella marine LED technology in a nickle chrome or gold plated brass. The brass arm
range of attractive and ‘cool to touch’ reading and knuckle offers adjustable swing and pitch to
lamps. achieve optimum light angles.
or eye strain.
LED
LED
Downlight
Downlight
Spot
Spot
White
White
Light
Light
Candela
Candela
Output
Output Luminous
Luminous
Intensity
Intensity
- Distance
- Distance
/ Lux
/ Lux
500500
A further benefit of the low power consumption
is the ‘cool to touch’ lamp surface, effectively
450450
100100
Intensity (cd)
Intensity (cd)
50 50
46 46 92.5
92.5
LuxLux 46 46
−40°
−40° −30°
−30° −20°
−20° −10°
−10° 0° 0° 10°10° 20°20° 30°30° −40°
−40° 2m2m
540540
mmmm
Angle
Angle
LED
LED
Downlight
Downlight
Spread
Spread
White
White
Light
Light
Candela
Candela
Output
Output Luminous
Luminous
Intensity
Intensity
- Distance
- Distance
/ Lux
/ Lux
500500
450450
400400 32°32°
350350
300300
250250 50 50 105105
LuxLux 50 50
1m1m
630630
mmmm
200200
150150
100100
Intensity (cd)
Intensity (cd)
50 50
13 13 28 28
LuxLux 13 13
−40°
−40° −30°
−30° −20°
−20° −10°
−10° 0° 0° 10°10° 20°20° 30°30° −40°
−40° 2m2m
1260
1260
mmmm
Angle
Angle
70
e
e
Dimensions:
a
Dimensions:
a = 70 mm / 2.76”
a
a=b =7055mm
mm/ /2.76”
2.17”
d b=c =5536mm
mm/ /2.17”
1.42”
c=d =3675mm
mm/ /1.42”
2.95”
d
c d=e =7565mm
mm/ /2.95”
2.56”
c e = 65 mm / 2.56”
b
b
Ponui
0770 Series Reading Lamps
71
Completely sealed with an ultra low power Each lamp is completely sealed and can be
consumption of less than 0.8W, Hella marine installed almost anywhere on board, interior or
Rakino and Tiri series LED downlights offer exterior, wet or dry. The ultra low heat signature will
class leading efficiency and highly effective not cause damage to surrounding materials.
illumination.
Available in 12V or 24V DC versions, these LED
The lamps also run very cool due to their low lamps can be dimmed and controlled with the Hella
current draw to provide substantial power saving marine Dimmer (5XA 998 572-001).
benefits compared to incandescent lighting. LED
LED
Downlight
Downlight
Spot
Spot
White
White
Light
Light
Candela
Candela
Output
Output Luminous
Luminous
Intensity
Intensity
- Distance
- Distance
/ Lux
/ Lux
500500
50 50
46 46 92.5
92.5
LuxLux 46 46
−40°
−40° −30°
−30° −20°
−20° −10°
−10° 0° 0° 10°10° 20°20° 30°30° −40°
−40° 2m2m
540540
mmmm
Angle
Angle
LED Downlight Candela and Lux performance. White light. Spot. LED Downlight Candela and Lux performance. White light. Spread.
450
450 450450
400
400 15° 15° 400400 32°32°
350
350 350350
300
300 300300
185 185
370 Lux 185
370 Lux 185 50 50 105105
LuxLux 50 50
250
250 1m
1m 270 mm
250250 1m1m
270 mm 630630
mmmm
200
200 200200
150
150 150150
100
100 100100
Intensity (cd)
Intensity (cd)
Intensity (cd)
50
50 50 50
46 46 Lux
92.5 46
92.5 Lux 46 13 13 28 28
LuxLux 13 13
−40°
−40° −30°
−30° −20°
−20° −10°
−10° 0° 10° 20° 30° −40° 2m
2m −40°
−40° −30°
−30° −20°
−20° −10°
−10° 0° 0° 10°10° 20°20° 30°30° −40°
−40° 2m2m
540 mm 540 mm 1260
1260
mmmm
Angle Angle
Angle
72
LED Downlight Spread White Light Candela Output Luminous Intensity - Distance / Lux
500
500
Hella
450
450
marine Catalogue HA 2013.indd 72 26/08/2013 1:53:38 p.m.
Lens Material UV resistant enhanced impact acrylic
Rim Material UV resistant plastic. 316 stainless steel (Round lamps only)
Colour Temperature 5000K (White) / 3000K (Warm White)
Dimming Dimmed via Hella marine Dimmer 5XA 998 572-001
Cable Pre-wired with 120mm of single core marine cable
Operating Voltage 12V DC or 24V DC
Power Consumption < 0.8W ( <0.07A@12V / <0.03A@24V )
Degree of Protection IP 67 - Completely Sealed
Packaging for Mounting Stainless steel screws included
aftermarket presentation
Weight 45g (including cable)
Rakino
b
Spread
Dimensions Pattern Spot Pattern
a = 75.0 mm / 2.95” with plastic rim
c
White
72.0 mm / Light LED
2.83” with Downlights
stainless steel rim - Spread White Light LED Downlights - Spot
b = 18.5 mm / 0.73”
Voltage
c = 50.0 mm / 1.97” Rim Finish Part Number Voltage Rim Finish Part Number
12V
d = 27.0 mmDC
/ 1.06” Polished stainless rim 2JA 959 599-051 12V DC Polished stainless rim 2JA 959 599-551
12V DC White plastic rim 2JA 959 599-001 12V DC White plastic rim 2JA 959 599-501
a d
b
Dimensions 24V DC Polished stainless rim 2JA 959 599-151 24V DC Polished stainless rim 2JA 959 599-651
a = 75.0 mm / 2.95” with plastic rim 24V DC White plastic rim 2JA 959 599-101 24V DC White plastic rim 2JA 959 599-601
c 72.0 mm / 2.83” with stainless steel rim
b = 18.5 mm / 0.73”
c = 50.0 mm / 1.97”
Warm White Light LED Downlights - Spread Warm White Light LED Downlights - Spot
d = 27.0 mm / 1.06” Voltage Rim Finish Part Number Voltage Rim Finish Part Number
12V DC Polished stainless rim 2JA 959 596-051 12V DC Polished stainless rim 2JA 959 596-551
d
12V DC White plastic rim 2JA 959 596-001 12V DC White plastic rim 2JA 959 596-501
24V DC Polished stainless rim 2JA 959 596-151 24V DC Polished stainless rim 2JA 959 596-651
24V DC White plastic rim 2JA 959 596-101 24V DC White plastic rim 2JA 959 596-601
Tiri
Spread Pattern Spot Pattern
White Light LED Downlights - Spread White Light LED Downlights - Spot
b
Voltage
Dimensions Rim Finish Part Number Voltage Rim Finish Part Number
a =12V
60.0DC Chrome plated rim
mm / 2.36” 2JA 980 596-031 12V DC Chrome plated rim 2JA 980 596-531
b = 16.0 mm / 0.63”
c =12V
50.0DC White plastic rim 2JA 980 596-001
a
12V DC White plastic rim 2JA 980 596-501
c
mm / 1.97”
d =24V DC / 0.87”
22.0mm Chrome plated rim 2JA 980 596-131 24V DC Chrome plated rim 2JA 980 596-631
a d
24V DC White plastic rim 2JA 980 596-101 24V DC White plastic rim 2JA 980 596-601
b
Warm White Light LED Downlights - Spread Warm White Light LED Downlights - Spot
Dimensions
a= 60.0 mm / 2.36” Voltage Rim Finish Part Number Voltage Rim Finish Part Number
c
b= 16.0 mm / 0.63” 12V DC Chrome plated rim 2JA 980 597-031 12V DC Chrome plated rim 2JA 980 597-531
c= 50.0 mm / 1.97” 12V DC White plastic rim 2JA 980 597-001 12V DC White plastic rim 2JA 980 597-501
d= 22.0mm / 0.87”
24V DC Chrome plated rim 2JA 980 597-131 24V DC Chrome plated rim 2JA 980 597-631
d 24V DC White plastic rim 2JA 980 597-101 24V DC White plastic rim 2JA 980 597-601
73
Switching between the SpotLED’s white light Completely sealed, shock and vibration resistant,
main beam or the ambient colour ring offers a Hella marine LED lamps provide outstanding
unique illumination option. reliability as there are no filaments to break. The
surface is cool to the touch so will not cause
Consumption is less than 2.5W (<0.18A@12V), damage to surrounding materials.
offering more than 75% power saving compared
to a 10W G4 halogen lamp.
LED IP 67 9-31V UV 5 YR
Each lamp features an outer ring of red, white COMPLETELY
SEALED
MULTIVOLT TM
RESISTANT WARRANTY
450
400 13°
350
300
200
150
100
Intensity (cd)
50
56 112.5 Lux 56
−40° −30° −20° −10° 0° 10° 20° 30° −40° 2m
480 mm
Angle
74
Dimensions
a a = 50.0 mm / 1.97”
Dimensions
a b = 34.0
a = 50.0 mm mm / 1.34”
/ 1.97”
b = 34.0 mm
/ 1.34”
c = 41.0
c = 41.0 mm mm / 1.61”
/ 1.61”
d = 75.0 mm
/
d = 75.02.95”
mm with plastic
/ 2.95”rim with plastic rim
72.0 mm
/ 2.83” with stainless steel rim
72.0 mm / 2.83” with stainless steel rim
d c
d c
75
Hella marine 95mm LED downlights harness state EuroLED® 95mm lamps require no remote drivers or
of the art LED technology to provide illumination control wires, simply connect the positive and negative
comparable to 20W incandescent lamps for a cables to 12V or 24V DC systems. Each lamp operates
fraction of the power consumption. on an input voltage between 10-33V DC and can also
be PWM dimmed and controlled via the Hella marine
Completely sealed for interior and exterior installations, Dimmer (5XA 998 572-001).
wet or dry, EuroLED® 95mm lamps are the durable
choice with class leading efficiency. EuroLED® downlights offer class leading ‘fit and forget’
Hella marine technology with impressive illumination.
Power consumption is less than 4.0W (<0.33A@12V
/ <0.17A@24V) offering significant reductions in
energy use and heat generation when compared to LED IP 67 10-33V
COMPLETELY MULTIVOLT TM UV 5 YR
RESISTANT WARRANTY
SEALED
incandescent lighting.
450
30°
400
350
300
200
150
100
Intensity (cd)
50
c c
Dimensions
Dimensions
a a==95.0
95.0 mm 3.75”with
mm / 3.75” withplastic
plastic
rimrim
97.0 mm
97.0 mm / 3.82”
3.82”with
withstainless
stainlesssteel rimrim
steel
bb==72.0
72.0 mm
mm // 2.84”
2.84”
b a a a
b a c c==25.0mm
25.0mm // 0.98”
0.98”with
withscrew
screwmounting
mounting
28.0 mm
28.0 mm // 1.10”
1.10”with
withspring
springclips
clips
d = 9.0mm / 0.35”
de==9.0mm / 0.35”
82.0mm / 3.23” PCD
e e = 82.0mm / 3.23” PCD
e
d
d
Screw Mount
77
Completely sealed 115mm downlights feature a Pre-wired with quality twin core marine tinned cable,
wide spread of illumination with class leading each lamp is completely sealed and features a shallow
colour rendering and interior enhancing colour 22mm mounting depth. EuroLED® lamps can be installed
temperatures in white or warm white. almost anywhere on board, interior or exterior, wet or
dry. The low heat signature will not cause damage to
Power consumption is less than 4.0W (<0.33A@12V / surrounding materials.
<0.17A@24V) offering illumination comparable to 20W
halogen lighting with substantial power saving and heat EuroLED® downlights offer class leading ‘fit and forget’
reduction. Hella marine technology with impressive illumination.
450
36°
400
350
300
200
150
100
Intensity (cd)
50
Dimensions
a =Dimensions
115.0 mm / 4.53” with plastic rim Dime
Dimensions
Dimension
a 116.5 mmmm
= 115.0 / 4.59” withwith
/ 4.53” stainless steel
plastic rimrim = a120.0
= 1
a = a120.0mm
a
b b = 90.0116.5
mm mm / 3.54”
/ 4.59” with stainless steel rim = b31.5m
b = b31.5mm= 3
b a
c =b22.0 mmmm/ 0.87”
= 90.0 / 3.54” a a a
d =c 77.0mm
= 22.0 mm/ 3.03“
/ 0.87”
e =d31.5mm
= 77.0mm/ 1.24”
/ 3.03“
f
f =e 100.0mm
= 31.5mm/ 3.94” PCD
/ 1.24” a a
f
e d
f = 100.0mm / 3.94” PCD
e d b b b
Dimensions
a = 120.0mm / 4.72”
b = 31.5mm / 1.24”
a
Screw Mount
79
Hella marine touch technology makes lighting Each EuroLED ® is completely sealed, highly impact
control beautifully simple. and shock resistant for an ultra long service life.
MultivoltTM electronics provide consistent illumination
Touch the red pad for red light, the white pad for white and protection across a range of voltages from 9-33
light. Hold a finger on the pad for two seconds and DC, even under severe voltage fluctuations, low
the lamp will cycle through increasing / decreasing battery voltages and long cable runs.
intensity levels until the maximum / minimum intensity
is achieved. Release at the intensity level required. EuroLED ® Touch technology provides durable,
energy saving illumination for a wide range of
Dual colour EuroLED ® lamps may also be remotely commercial and recreational applications.
operated from multiple points via momentary switches.
Holding an external switch for two seconds will
synchronise the lamps to the same colour and/or LED IP 67 9-33V
COMPLETELY MULTIVOLT TM UV 5 YR
RESISTANT WARRANTY
SEALED
intensity level.
Light levels are stored by the lamps circuitry, even
when a vessel’s batteries are turned off. The lamp
Southstar 37 www.salthouseboats.com will turn on at the colour intensity previously set,
regardless of power interruption.
450
400 32°
350
300
200
150
100
Intensity (cd)
50
−40° −30° −20° −10° 0° 10° 20° 30° −40° 2m 60 119 Lux 60
1116 mm
80 Angle
Dimensions
Dimensions
a =a =150150
mm mm/ /5.90”
5.90”
b =b =124124
mm mm/ /4.88”
4.88”
c c =c =20 20
mm mm / /0.79”
0.79” a a
a
a a Lens Material
a a UV resistant enhanced impact acrylic
c c
Rim Material UV resistant plastic. 316 stainless steel
b a
Colour Temperature 4200K (White) 3000K (Warm White)
mensions
150 mm / 5.90” Cable Pre-wired with 500mm of twin core or triple core marine cable
124 mm / 4.88” b b a a
20 mm / 0.79” Operating Voltage MultivoltTM 9-33V DC
Power Consumption 4.0W ( 0.33A@12V / 0.17A@24V )
Degree of Protection Completely Sealed
a a
Dual colour EuroLED ® Touch 150 lamps with dimming and remote momentary switch control.
c c a a
a a Touch the pad for ON/OFF or hold finger on the pad to cycle through dimming levels.
c
mensions
Dimensions
Dimensions
150 mm / 5.90” White /a Red
a= = Light
150150
mm mm/ EuroLED
5.90”
/ 5.90”
®
Touch 150 Lamps
124 mm / 4.88” b b a a b b Dimensions
= =
124124
mm mm/ 4.88”
/ 4.88”
20 mm / 0.79” Voltage c c= = Rim
20 20
mm Finish
mm / 0.79”
/ 0.79” Part Number
a = 150 mm / 5.90”
b a 9-33V DC b White plastic
= 124 mm / 4.88” rim 2JA 980 630-001
9-33V DC c Polished / 0.79” steel rim 2JA 980 630-011
= 20 mm stainless
A white surface mount spacer
Warm White / Red Light EuroLED® Touch 150 Lamps
ring is included with each lamp.
a
a Voltage Rim Finish Part Number
Single colour EuroLED ® Touch 150 lamps without dimming or momentary switch control.
Touch the white pad for ON, touch the black pad for OFF.
A white surface mount spacer
ring is included with each lamp.
White Light EuroLED® Touch 150 Lamps
Voltage Rim Finish Part Number
EuroLED ® Touch lamps provide red / white, Advanced Hella marine optic technology provides
blue / white or white only light control via a safe and uniform light pattern, without glare or
completely sealed touch sensitive technology. discomfort.
Touch the colour pad for red or blue light, the Each lamp is completely sealed, highly impact
white pad for white light. On the dual colour and shock resistant, for an ultra long service
versions, hold a finger on the pad for more than life. MultivoltTM circuitry provides consistent
two seconds and the lamp will cycle through four illumination across a range of voltages from 9-33
dimming levels. Release at the intensity required. DC, even under severe voltage fluctuations.
Dual colour EuroLED ® Touch lamps may also EuroLED ® provide durable, energy saving lighting
be remotely operated by momentary switches. for a wide range of commercial and recreational
Holding one of the external switches for two applications.
seconds will synchronise the lamps to the same
colour and/or intensity level.
LED IP 67 9-33V
COMPLETELY MULTIVOLT TM UV 5 YR
RESISTANT WARRANTY
SEALED
Rayglass Protector 11m www.rayglass.co.nz Light levels are stored by the lamps circuitry,
even when a vessel’s batteries are turned off. The
lamp will always turn on at the colour intensity
previously set, regardless of power interruption.
EuroLED ® current draw is 4W on white and less
than 1.5W on red or blue to provide significant
power savings.
450
400 32°
350
300
200
150
100
Intensity (cd)
50
−40° −30° −20° −10° 0° 10° 20° 30° −40° 2m 60 119 Lux 60
1116 mm
82 Angle
Dimensions
Installation Surface mount with robust bush mount
Dimensions
a = 129.5mm / 5.10” Approvals CE, C-Tick
ab =
= 29.5mm
129.5mm/ 1.16”
/ 5.10”
c = 110mm / 4.33”
b = 29.5mm / 1.16” ISO 8846 (Ignition Protection)
c = 110mm / 4.33” EuroLED® Spacer Rings
Dual colour EuroLED ® Touch 130 lamps with dimming and remote momentary switch control.
Touch the pad for ON/OFF or hold finger to cycle through dimming levels.
Single White EuroLED ® Touch 130 lamps without dimming or momentary switch control.
Touch the white pad for ON, touch the black pad for OFF.
83
LED IP 67 12/24
DUALVOLT
COMPLETELY
UV 5 YR
RESISTANT WARRANTY
SEALED
84
e a e a
Dimensions
a = 45mm / 1.77”
b = 31.5mm / 1.24”
c b c c = 25.4mm b/ 1.00”
d = 14mm / 0.55”
e = 22.7mm / 0.89”
d d
e a
Accessories to suit 8560 series 12 / 24V DC Gold plated cap 2JA 998 560-231
12 / 24V DC Black plastic cap 2JA 998 560-221
9AR 994 554-211 12 / 24V DC Satin chrome plated plastic cap 2JA 998 560-241
Polished 316 Stainless Steel Cap 12 / 24V DC Polished stainless steel cap 2JA 998 560-251
and Mounting Screw Kit.
85
Hella marine Slim Line LED courtesy lamps Surface mounting accessory rings provide
can be installed almost anywhere on board. numerous installation options with surface finishes
to compliment or contrast the lamp rims.
Advanced lens technology provides a cool and
even spread of soft light without glare or eye
LED IP 67 UV 5 YR
strain. Each lamp is completely sealed, highly COMPLETELY
SEALED RESISTANT WARRANTY
b b
bb
Dimensions
Packaging for
a = 50.0 mm / 1.97”
Dimensions
Dimensions
aftermarket presentation a e a a== =50.0
b50.0 mm
mm
13.0 / / 1.97”
mm / 1.97”
0.51”
aa a ee b b== =13.0
c13.0 mm
mm
21.0 / c/ 0.51”
mm / 0.51”
a
0.83”
c c==d21.0
=21.0 mm
75.0
mm / / 0.83”
mm / 0.83”
2.95” with plastic rim
d d==75.0 72.0
75.0 mm
mm mm / 2.95”
2.83”
/ / 2.95” with
with
with stainless
plastic
plastic rim steel rim
rim
d c
e72.0
=72.0
75.0
mm
mm mm / 2.83”
2.95”
/ / 2.83” withstainless
with stainlesssteel
steelrim
rim
f
e e==f75.0
=75.0
15mm
.0
mm mm / 2.95”
0.59”
/ / 2.95”
dd cc f f
a f f==1515.0
d.0mm
mm/ / 0.59”
0.59” a e
b b
Dimensions
a = 60.0 mm / 2.36”
b = 16.0 mm / 0.63”
a a c c a a c = 50.0 mm / 1.97”
d = 22.0 mm / 0.87”
e = 17.0 mm / 0.67”
a a d d a a e e
86
Dimensions
Dimensions
a = a60.0 mmmm
= 60.0 / 2.36”
/ 2.36”
b = b16.0 mmmm
= 16.0 / 0.63”
/ 0.63”
Hella marine Catalogue HA 2013.indd 86 c = c50.0 mmmm
= 50.0 / 1.97”
/ 1.97” 26/08/2013 1:55:45 p.m.
Round Slim Line Lamps Square Slim Line Lamps
White Light Round LED Lamps* Warm White Light Square LED Lamps*
Rim Finish 12V Part Number 24V Part Number Rim Finish 12V Part Number 24V Part Number
Satin stainless steel rim 2XT 980 500-591 2XT 980 501-591 Satin chrome plated rim 2XT 980 580-561 2XT 980 581-561
Polished stainless steel rim 2XT 980 500-521 2XT 980 501-521 Chrome plated rim 2XT 980 580-571 2XT 980 581-571
Gold stainless steel rim 2XT 980 500-531 2XT 980 501-531 Gold plated rim 2XT 980 580-531 2XT 980 581-531
White plastic rim 2XT 980 500-541 2XT 980 501-541 White plastic rim 2XT 980 580-551 2XT 980 581-551
Black plastic rim 2XT 980 500-551 2XT 980 501-551 Black plastic rim 2XT 980 580-541 2XT 980 581-541
Warm White Light Round LED Lamps* Warm White Light Square LED Lamps*
Rim Finish 12V Part Number 24V Part Number Rim Finish 12V Part Number 24V Part Number
Satin stainless steel rim 2XT 980 500-791 2XT 980 501-791 Satin chrome plated rim 2XT 980 580-761 2XT 980 581-761
Polished stainless steel rim 2XT 980 500-721 2XT 980 501-721 Chrome plated rim 2XT 980 580-771 2XT 980 581-771
Gold stainless steel rim 2XT 980 500-731 2XT 980 501-731 Gold plated rim 2XT 980 580-731 2XT 980 581-731
White plastic rim 2XT 980 500-741 2XT 980 501-741 White plastic rim 2XT 980 580-751 2XT 980 581-751
Black plastic rim 2XT 980 500-751 2XT 980 501-751 Black plastic rim 2XT 980 580-741 2XT 980 581-741
Green Light Round LED Courtesy Lamps Green Light Square LED Courtesy Lamps
Rim Finish 12V Part Number 24V Part Number Rim Finish 12V Part Number 24V Part Number
Satin stainless steel rim 2XT 980 502-091 2XT 980 503-091 Satin chrome plated rim 2XT 980 582-061 2XT 980 583-061
Polished stainless steel rim 2XT 980 502-021 2XT 980 503-021 Chrome plated rim 2XT 980 582-071 2XT 980 583-071
Gold stainless steel rim 2XT 980 502-031 2XT 980 503-031 Gold plated rim 2XT 980 582-031 2XT 980 583-031
White plastic rim 2XT 980 502-041 2XT 980 503-041 White plastic rim 2XT 980 582-051 2XT 980 583-051
Black plastic rim 2XT 980 502-051 2XT 980 503-051 Black plastic rim 2XT 980 582-041 2XT 980 583-041
Blue Light Round LED Courtesy Lamps Blue Light Square LED Courtesy Lamps
Rim Finish 12V Part Number 24V Part Number Rim Finish 12V Part Number 24V Part Number
Satin stainless steel rim 2XT 980 502-291 2XT 980 503-291 Satin chrome plated rim 2XT 980 582-261 2XT 980 583-261
Polished stainless steel rim 2XT 980 502-221 2XT 980 503-221 Chrome plated rim 2XT 980 582-271 2XT 980 583-271
Gold stainless steel rim 2XT 980 502-231 2XT 980 503-231 Gold plated rim 2XT 980 582-231 2XT 980 583-231
White plastic rim 2XT 980 502-241 2XT 980 503-241 White plastic rim 2XT 980 582-251 2XT 980 583-251
Black plastic rim 2XT 980 502-251 2XT 980 503-251 Black plastic rim 2XT 980 582-241 2XT 980 583-241
Amber Light Round LED Courtesy Lamps Amber Light Square LED Courtesy Lamps
Rim Finish 12V Part Number 24V Part Number Rim Finish 12V Part Number 24V Part Number
Satin stainless steel rim 2XT 980 507-091 2XT 980 508-091 Satin chrome plated rim 2XT 980 587-061 2XT 980 588-061
Polished stainless steel rim 2XT 980 507-021 2XT 980 508-021 Chrome plated rim 2XT 980 587-071 2XT 980 588-071
Gold stainless steel rim 2XT 980 507-031 2XT 980 508-031 Gold plated rim 2XT 980 587-031 2XT 980 588-031
White plastic rim 2XT 980 507-041 2XT 980 508-041 White plastic rim 2XT 980 587-051 2XT 980 588-051
Black plastic rim 2XT 980 507-051 2XT 980 508-051 Black plastic rim 2XT 980 587-041 2XT 980 588-041
Red Light Round LED Courtesy Lamps Red Light Square LED Courtesy Lamps
Rim Finish 12V Part Number 24V Part Number Rim Finish 12V Part Number 24V Part Number
Satin stainless steel rim 2XT 980 507-301 2XT 980 508-291 Satin chrome plated rim 2XT 980 587-261 2XT 980 588-261
Polished stainless steel rim 2XT 980 507-221 2XT 980 508-221 Chrome plated rim 2XT 980 587-271 2XT 980 588-271
Gold stainless steel rim 2XT 980 507-231 2XT 980 508-231 Gold plated rim 2XT 980 587-231 2XT 980 588-231
White plastic rim 2XT 980 507-241 2XT 980 508-241 White plastic rim 2XT 980 587-251 2XT 980 588-251
Black plastic rim 2XT 980 507-251 2XT 980 508-251 Black plastic rim 2XT 980 587-241 2XT 980 588-241
Black Spacer 8HG 959 993-102 Chrome plated spacer 8HG 959 993-512
White Spacer 8HG 959 993-112 Gold plated spacer 8HG 959 993-522
Satin chrome plated spacer 8HG 959 993-532
Black spacer 8HG 959 993-602
White spacer 8HG 959 993-542
87
Completely sealed and ultra durable, Hella marine LED step lamps are proven worldwide. 9680 series
lamps feature engineered optics to direct light downwards at 30 degrees safely illuminating deck and step
tread surfaces without shining into the eyes.
MultivoltTM electronics ensure consistent illumination across a range of input voltages and lamp protection
for an ultra long service life.
Packaging for
Voltage Rim Finish Part Number
aftermarket presentation
10-33V DC Polished stainless steel rim 2XT 959 680-411
10-33V DC Gold stainless steel rim 2XT 959 680-421
- Completely sealed housing
10-33V DC Satin stainless steel rim 2XT 959 680-431 - Pre-wired with marine cable
CLEAR
LENS
88
Completely sealed and ultra durable, Hella marine LED courtesy lamps feature engineered optics
to ensure an even spread of light without harsh point sources. Hella marine LED courtesy lamps
are highly energy efficient. Available in Narrow Rim (22mm high) and Wide Rim (28mm high) sizes.
Attractive trim accessories to fit Wide Rim lamps only are available in polished, satin or gold 316
stainless steel finishes.
Wide Rim LED Courtesy Lamps Narrow Rim LED Courtesy Lamps
a a a a Dimensions
Dimensions
a Dimensions
Dimensions
Dimensions a Dimensions
cc c a =a =a =84.0
84.0 84.0
mm mm
/ mm/ 3.31”
3.31”/ 3.31”
c c c a= 79.0amm=a =79.0
79.0
mm
/ 3.11” mm
/ 3.11”
/ 3.11”
b =b =b =29.0
29.0 29.0
mm mm
/ mm/ 1.14”
1.14”/ 1.14” b= 22.0bmm=b =22.0
22.0
mm
/ 0.87” mm
/ 0.87”
/ 0.87”
c =c =58.7
c =58.7
58.7
mm mm
/ mm/ 2.31”
2.31”/ 2.31”b b e ec = 58.7cmm=c =58.7
58.7
mm
/ 2.31” mm
/ 2.31”
/ 2.31”
b bb e e e b e
d =d =d =44.0
44.0 44.0
mm mm
/ mm/ 1.73”
1.73”/ 1.73” d= 44.0dmm=d =44.0
44.0
mm
/ 1.73” mm
/ 1.73”
/ 1.73”
e =e =e =16.0
16.0 16.0
mm mm
/ mm/ 0.63”
0.63”/ 0.63” e= 16.0emm / 0.63”
=e =16.0
16.0
mmmm
/ 0.63”
/ 0.63”
dd d d d d
f f f f =f =20.0 mm
f =20.0
20.0/ mm
mm 0.79”
/ 0.79”
/ 0.79” f f f f= 20.0f mm / 0.79”
=f =20.020.0
mmmm
/ 0.79”
/ 0.79”
White Light LED Courtesy Lamp White Light LED Courtesy Lamp
Voltage Lens Colour Part Number Voltage Lens Colour Part Number
10-33V Clear 2XT 959 510-851 10-33V Clear 2XT 959 510-451
Warm White Light LED Courtesy Lamp Warm White Light LED Courtesy Lamp
Voltage Lens Colour Part Number Voltage Lens Colour Part Number
Packaging for 10-33V Clear 2XT 959 510-901 10-33V Clear 2XT 959 510-931
aftermarket presentation
Green Light LED Courtesy Lamp Green Light LED Courtesy Lamp
Voltage Lens Colour Part Number Voltage Lens Colour Part Number
10-33V Clear 2XT 959 510-621 10-33V Clear 2XT 959 510-151
Blue Light LED Courtesy Lamp Blue Light LED Courtesy Lamp
Voltage Lens Colour Part Number Voltage Lens Colour Part Number
10-33V Clear 2XT 959 510-651 10-33V Clear 2XT 959 510-251
Amber Light LED Courtesy Lamps Amber Light LED Courtesy Lamps
Voltage Lens Colour Part Number Voltage Lens Colour Part Number
12V Amber 2XT 959 510-511 12V Amber 2XT 959 510-011
Accessories to suit wide rim lamps 24V Amber 2XT 959 510-561 24V Amber 2XT 959 510-061
12V Clear 2XT 959 510-501 12V Clear 2XT 959 510-001
Polished 316 Stainless Steel Rim 24V Clear 2XT 959 510-551 24V Clear 2XT 959 510-051
9AR 998 019-001
Red Light LED Courtesy Lamps Red Light LED Courtesy Lamps
Gold Plated 316 Stainless Steel Rim
Voltage Lens Colour Part Number Voltage Lens Colour Part Number
9AR 998 019-011
12V Red 2XT 959 510-711 12V Red 2XT 959 510-311
Satin 316 Stainless Steel Rim 24V Red 2XT 959 510-761 24V Red 2XT 959 510-331
9AR 959 685-061 12V Clear 2XT 959 510-701 12V Clear 2XT 959 510-301
24V Clear 2XT 959 510-751 24V Clear 2XT 959 510-351
89
Featuring a completely sealed 10mm profile Engineered optics harness and distribute available
and class leading efficiency for a wide range of light without glare, harsh point sources or eye strain.
illumination tasks, The result is highly effective illumination with minimal
energy use.
The range offers two intensity levels. Interior
Intensity lamps (<3W) provide a wide spread of Quality twin core marine cable is sealed into each
powerful illumination in white (5000K) or warm lamp for absolute water tightness, reliable electrical
white (3000K) and are recommended as a viable connections and ongoing reliability.
alternative to 7W fluorescent or 10W incandescent
based lamps.
LED IP 67
COMPLETELY
UV 5 YR
RESISTANT WARRANTY
The Courtesy Intensity range (<2W) provides SEALED
Surface Strip Interior Intensity Candela and Lux performance. White light.
White LED Surface Mount Strip Light Luminous Intensity - Distance / Lux
500
450
42°
400
350
300
200
150
100
Intensity (cd)
50
Dimensions
b
a = 285 mm / 11.22”
b = 25.0 mm / 1.0”
c = 10.0 mm / 0.39”
Packaging for
c
aftermarket presentation
Completely sealed, compact LED lamps DuraLed® lamps are thoroughly proven for harsh
featuring highly efficient LED technology and environments and represent outstanding class
an ultra wide spread of light. leading energy efficiency and maintenance free ‘fit
and forget’ technology.
Power consumption is low at less than 2.5W
(less than 0.20A@12V) yet light performance is
comparable to an 8W fluorescent tube lamp.
LED IP 67 12/24
DUALVOLT
COMPLETELY
UV 5 YR
RESISTANT WARRANTY
SEALED
12 LED DuraLed White Light Candela Output Luminous Intensity - Distance / Lux
500
450
400 120°
350
300
30 60 Lux 30
250 1m
3300mm
200
150
100
Intensity (cd)
50
2m 8 15 Lux 8
−40° −30° −20° −10° 0° 10° 20° 30° −40° 6600mm
Angle
92
a c
Packaging for
Dimensions
aftermarket presentation a = 140 mm / 5.51”
b b = 65.0 mm / 2.56”
c = 32.0 mm / 1.26”
Dimensions
a = 140 mm / 5.51”
b = 65.0 mm / 2.56”
c = 32.0 mm / 1.26”
93
Powerful white light for heavy duty Hella marine MultivoltTM circuitry provides
applications and a safe, energy efficient and constant illumination and circuit protection from
reliable alternative to incandescent and 9-33V DC, even under severe voltage
fluorescent lighting. fluctuations. Spike protection, reverse polarity
protection and over voltage protection are all
Designed for engine rooms, storage lockers, built-in benefits of the sophisticated electronics
lazarettes and many heavy duty applications inside each lamp.
where reliability must not be compromised.
Advanced Hella marine lens and optic
engineering ensures a wide spread of light
LED IP 67 9-33V 5 YR
without glare or harsh point sources. COMPLETELY
SEALED
MULTIVOLT TM UV
RESISTANT WARRANTY
800
DuraLed® 20 Candela Output Luminous Intensity - Distance / Lux 9-33V DC Carton 2JA 980 608-001
9-33V DC Blister 2JA 980 608-002
700
64°
600
DuraLed® 20 Candela Output Luminous Intensity - Distance / Lux
800
500
c
a
700
500 d
700
200 c
1m 195 390 Lux 195 a Dimensions
400
102064°
mm
a = 177mm / 6.97”
Intensity (cd)
600
100 b = 100mm / 3.94”
b
300 c = 30mm / 1.18”
48 97.5 Lux 48 d = 148mm / 5.83”
500
−40° −30° −20° −10° 0° 10° 20° 30° 40° 2m
2040 mm
200
Angle d
195 390 Lux 195
400 1m
Intensity (cd)
1020 mm Dimensions
100 a = 177mm / 6.97”
b = 100mm / 3.94”
300 DuraLed® 36 Candela Output Luminous Intensity - Distance / Lux
800 48 97.5 Lux 48 c = 30mm / 1.18”
−40° −30° −20° −10° 0° 10° 20° 30° 40° 2m
2040 mm d = 148mm / 5.83”
Angle
200
700
DuraLed® 36 LED DuraLed® 36 LED White Light Lamps
Intensity (cd)
64°
100
600
Voltage Packaging Part Number
DuraLed® 36 Candela Output Luminous Intensity - Distance / Lux
800
48 97.5 Lux 48
9-33V DC Carton 2JA 959 037-521
−40° −30° −20° −10° 0° 10° 20° 30° 40° 2m
2040 mm
500 Angle 9-33V DC Blister 2JA 959 037-522
700
500 c
a
700
200
300 600 Lux 300
400 1m
102064°
mm
Intensity (cd)
600
b
100
300
75 150 Lux 75
500
−40° −30° −20° −10° 0° 10° 20° 30° 40° 2m
2040 mm
d
Angle
200 c
300 600 Lux 300
a Dimensions
400 1m
Intensity (cd)
700 Dimensions
Intensity (cd)
DuraLed® 50 Candela Output Luminous Intensity - Distance / Lux 9-33V DC Carton 2JA 980 604-011
800
300
500
DuraLed® 50 LED White/Red Light Lamp
700
200
390 780 Lux 390 Voltage Packaging Part Number
400 1m
102064°
mm
Intensity (cd)
600
100
9-33V DC Carton 2JA 980 604-061*
300 *30xWhite 20xRed LEDs
97 195 Lux 97
500
−40° −30° −20° −10° 0° 10° 20° 30° 40° 2m
2040 mm
Angle
200
c
1m 390 780 Lux 390 a
400
Intensity (cd)
1020 mm
100
300
b
97 195 Lux 97
−40° −30° −20° −10° 0° 10° 20° 30° 40° 2m
2040 mm
Angle
200 d
Intensity (cd)
c
100 a Dimensions
a = 220mm / 8.66”
97 195 Lux 97 b = 96mm / 3.78”
−40° −30° −20° −10° 0° 10° 20° 30° 40° 2m
2040 mm b
Angle c = 31mm / 1.22”
d = 193mm / 7.60”
d
95
Dimensions
a = 220mm / 8.66”
b = 96mm / 3.78”
Hella marine Catalogue HA 2013.indd 95 c = 31mm / 1.22” 26/08/2013 1:57:04 p.m.
LED Interior and Exterior Lighting
Spare Parts
Black Plastic Rim Soft Edge 9AB 959 505-202 Suits Series
White Plastic Rim Soft Edge 9AB 959 505-312 9596, 9599 (Rakino)
Polished 316 S/S Rim Soft Edge 9AB 959 505-502 3980 (SpotLED)
Gold Plated 316 S/S Rim Soft Edge 9AB 959 505-522 0500, 0501, 0502, 0503,
Satin Chrome Plated 316 S/S Rim Soft Edge 9AB 959 505-562 0507, 0508 (Round Slim line)
White Plastic Rim Square Edge 9AB 959 505-912
Polished 316 S/S Rim Square Edge 9AB 959 505-402
Gold Plated Plastic Spacer 8HG 959 993-522 0507, 0508 (Square Slim line)
Fluorescent Lamps
Modern, attractive and power saving fluorescent lights for a variety of interior applica-
tions.
The combination of advanced electronics and efficient compact fluorescent tubes
ensures lower power consumption than incandescent lamps for the same light output.
98
4532 Series
Adjustable lamps for navigation areas.
An ON/OFF switch is integrated into the lamp head.
A red lens is included for optional 'non glaring' night illumination. 295
295 4646
5050 4040
12V / 6W Bulb
4532 Series Halogen Interior Lamps
(HL126X)
Voltage Arm Length Part Number
4532 Series
Compact and functional mini halogen spot lamps for navigation
areas, berths and applications where adjustable light is required.
A red lens is included for optional 'non glaring' night illumination.
An ON/OFF switch is integrated into the lamp head. 70
4192 Series
Ideal berth or chart reading lamps. Shutter tilts to switch lamp ON and OFF.
Adjustable light opening.
100 29
49
Housing Description Plastic
Bulb 10W SV8.5 (Not included)
Installation 2 flat plug connectors 6.3mm
Maximum Output 10W
99
8508 Series
Water resistant recess mount halogen lamps suitable for interior or exterior installations.
The reflector uses a 10W bulb. Bulbs up to 20W can also be used.
Supplied with a silicon seal to prevent the glass lens from vibrating. Spring clip mounting.
8513 Series
Water resistant marine lamps made from tough polycarbonate with a foam
rubber gasket. Suitable for interior or exterior installations.
Mounting screws included. Integrated ON / OFF switch.
Ø 125 37
8565 Series
Compact round fluorescent lamps offering energy efficiency and a long service life.
MultivoltTM electronics provide over-voltage, reverse polarity protection and consistent
light output across a range of input voltages from 10-30V DC.
7W fluorescent tube produces light output equivalent to a 40W incandescent bulb.
7W Tube
8565 Series Fluorescent Tube Interior / Exterior Lamps
(2G7)
Voltage Housing Colour Part Number
100
101
Hella marine LED trailer lamps are the highly visible, maintenance free solution for reliable and
safe boat trailer lighting.
Designed and manufactured in New Zealand, every product is a completely sealed, maintenance free
unit. They are also proven shock, vibration, UV and corrosion resistant and represent true ‘fit and forget’
technology.
Sophisticaled internal electonics reduce the effect of voltage drop, ensuring ongoing safety. This means
Hella LED lamps perform at full brightness across a range of voltages unaffected by voltage drop that can
dull bulb lamps due to long cable runs, joins, terminals and plugs in a boat trailer’s wiring.
c
a
DuraLED® Combi-S Lamps c
a
b
Mounting Designed to be mounted horizontally b
102
103
394 and 2395 series lamps feature a modern clear lens with black mounting base.
2
The full combination of functions are offered including LED stop, rear position and
rear indicator lamps, number plate illumination plus an integrated 18cm² red retro
reflector.
Low power consumption and long life equates to economical running costs.
Each lamp is completely sealed against dust and moisture ingress.
Optic appears clear until illuminated.
80 26
IP 67 5 YR 12/24
COMPLETELY
UV 5 YR
DUALVOLT
WARRANTY RESISTANT WARRANTY
SEALED
IP 67 5 YR 12/24
COMPLETELY
UV 5 YR 145 33
DUALVOLT
WARRANTY RESISTANT WARRANTY
SEALED
TOP
90
5651
TOP
#. Lamp Function
16 6
17 6
2
17
2
105
70 85
Voltage LED MultivoltTM 10-33V DC
36
Cable Pre-wired with 500mm of cable.
Bulk pack pre-wired with 2.5m of cable 20
106
107
Flat plug holder to suit 7 Pole Flat Plug (Part Number 4921)
108
Fans
188 95
Material Description Impact resistant plastic
Fan "Turbo"
Voltage Housing Colour Part Number
Fan "Jet"
Voltage Housing Colour Part Number
110
Light Dimmer
Features:
- Precise dimming control for 1 or 2 light groups
- Voltage regulation & ‘soft-start’ bulb protection
- Low voltage battery protection
- 12V and 24V DC
The Hella marine 2 Group Light Dimmer provides precise dimming control for one or two
separate light groups, and sophisticated voltage regulation with a ‘soft-start’ feature to
lengthen the life of a filament bulbs. The dimmer also provides low voltage protection against
deep battery discharge.
When batteries are charged voltage can rise to 14.4V on 12V systems or 28.8V on 24V
systems, this can shorten the life of bulbs.
The 2 Group Dimmer increases bulb life through sophisticated internal voltage regulation,
ensuring the lighting circuit voltage does not rise above 12V or 24V. As halogen bulbs also
have a high inrush current on start up, the 2 Group Dimmer features ‘soft-start’ to further
lengthen bulb life.
The dimmers low voltage protection also protects against deep battery discharge.
Lights will turn off automatically when battery voltage is lower than 9V on a
12V system or lower than 18V on a 24V system. Lights can be switched on
again when the battery is charged and reaches 12V or 24V respectively.
99
Diagram
Diagram
1 1 Diagram
Diagram
2: 2:
Controlling
Controlling
both groups
both groups Controlling
Controlling
each groupeachwith
group with
with onewith
switch.
one switch. its own its
(set
ownof) (set
switch(es)
of) switch(es)
Light group
Light
1 group 1 Switch 1Switch
group 1 &
group
2 1&2 Light group
Light
1 group 1 Switch 1Switch
group 1 group 1
Light group
Light
2 group 2
Light group
Light
2 group 2 Switch 2Switch
group 2 group 2
111
Operation ON / OFF 68 48
Degree of Protection IP 56
Max. Load 12 / 24V DC Continuous 275 Amps
68
. Intermittent 455 Amps (5 minutes)
. Cranking 1250 Amps (10 seconds)
Max. Voltage 48V DC
275 Amp Battery Master Switch
Part Number 4640
Operation ON / OFF
Degree of Protection IP 56
ON
102
Max. Load 12 / 24V DC Continuous 600 Amps
85
Operation 1-2-Both-OFF
Degree of Protection IP 56
Max. Load 12 / 24V DC Continuous 200 Amps - B1 or B2 6868
The Voltage Sensitive Relay (VSR) allows two batteries to be charged at the same time.
When the engine is started and the start battery reaches 13.7 volts, the VSR engages,
allowing two battery banks (start and auxiliary) to be charged simultaneously.
When the voltage drops below 12.8 volts (e.g. the engine is stopped), the VSR disengages,
separating the batteries. This system eliminates the possibility of draining the start battery and
protects sensitive electronic equipment powered from the auxiliary battery from harmful engine
start up spikes.
3099
113
Battery Switches
Description E
nables switching from battery 1 or 2 or
linking of both batteries.
May also be used as a manual isolator
when charging batteries.
Operation 1-2-Both-OFF
Max. Load 12V / 175A or 24V / 87.5A (continuous)
2765
2767 2768
4650 4652
4653 4654
114
Switch Panels
Dimensions 86 x 58 x 28mm (H x W x D)
Housing Impact resistant plastic
Switches Toggle, momentary or 3 way ON/OFF/ON
Maximum Load 12V / 20A
Pre-wired and suitable for 12V or 24V systems. Airpax circuit breakers
LED backlit labels. Powder coated aluminium base plate.
115
NO O I
mount switches are IP67 rated when installed and ideal for (+) (-)
25.2
22
M19x1
10
Panel Thickness 1~ 10mm
2 37
Insulation Resistance ≥ 1000mΩ 12
25.2
22
M19x1
Degree of Protection IP 67 for switches
IP 50 for buzzer 2 53.6
116
2766
2761
15 29 28 22
Part Number
2763
Brass construction 25 25 13
10
Mounting 11mm diameter mounting opening for
26.5
panels up to 6mm thick
Maximum Load 20A at 12V
2762
117
Rocker Switches
Rocker switches with push-on terminals for interior installations.
Rocker Switches 23 20 8 23
Colour Voltage Action Part Number
Rocker Switches
Rocker switches with push-on terminals for interior installations. 43 20
Rocker Switches
Voltage Action Part Number
30
Mounting 12mm opening for panels up to 5mm
O3mm
. 2 x 6.3mm flat-plug contacts
Maximum Load 16A@12V
‘Super Seal’ connector housings were developed to satisfy the increasing demands for safe and
reliable electrical connections. The connectors can be connected to existing components and used
with the equipment presently in use in the automotive and marine industry (sensors, oil pressure
sensors, water temperature monitoring circuits, etc.)
HM4980
mm
119
Hella marine MagCode Power Systems are a revolutionary plug and socket solution for 12V and 24V
systems. Unlike conventional connectors, MagCode Power Systems utilise magnetically coded flat
contacts to deliver safe power across modular devices, far superior to ubiquitous cigarette lighter type
sockets.
Both the port (outlet / socket) and the clip (connector / plug) feature powerful magnets with an integral
switching function ensuring a stable connection and safe power supply. Other metal objects of
Power Port permanent magnets cannot energise the contacts at any time making the outlet completely safe and
100% short circuit protected.
MagCode Power System Plus feature an additional mechanical twist lock offering greater security
(higher separation forces) and reliable prevention of arcing. The mechanical twist lock ensures the
Power Clip
automatic switching does not occur before the outside contact is securely fastened, eliminating
problems associated with arching.
MagCode Power Systems are water and dust resistant, easy to clean and suitable for retrofitting into
a vast range of vessels. Available in 12V DC and 24V DC variants, the magnets of the two voltage
variants are coded differently to avoid mix-ups.
Features:
Suitable for cable up to 2.5mm2
- 100% short circuit proof
Material Description Impact resistant plastic housing - Stable connection
Degree of Protection Port (front) IP 6K 9K - Easy to install
Terminals Port 6.3mm flat connectors - Shallow mounting depth
Clip Screw Terminals - Water and dust resistant
Maximum Load 25A - Coded system avoids voltage mix-ups
Power System
Open System (1) Closed System (2)
Colour code
Incoming
current Permanent magnets
Incoming
current
Pole Plate with permanent magnets
under
Pole without current
Voltageless
current
Under current
Power System Kit (1x Power Port & 1x Port Clip) 8KW 958 990-801 8KW 958 992-801
Power Port 8JA 958 990-001 8JA 958 992-001
Power Clip 8JB 958 991-001 8JB 958 993-001
Power System Plus Open System (1) Closed System (2) Closed System (3)
Incoming
Incoming
current Incoming
current
current
Pole without
Pole without
current Pole under
current
current
Colour code
Permanent magnets
Plate with permanent magnets
Voltageless
Under current
MagCode Power System Plus - Magnetic locking connection plus mechanical twist lock
Power System Plus Kit (1x Power Port & 1x Port Clip) 8KW 958 990-901 8KW 958 992-901
Power Port Plus 8JA 958 990-101 8JA 958 992-101
Power Clip Plus 8JB 958 991-101 8JB 958 993-101
120
150
Waterproof Cable Connectors
75
Heavy duty and completely sealed cable connectors
35
with screw down lids and brass contacts.
120
150
150
Waterproof Cable Connectors
75
Part Number Number of cables Cable Size 48
35
2757 8 Screw Connections up to 6mm2
2758 8 pole 8 double flat plug connections 120 up to 6mm2
2759 8 pole 8 double flat plug connections up to 10mm2
121
12V DC 3053
30 86 858787
Normally Open Relay, 5 Pin
Voltage Part Number
12V DC 3055
24V DC 3054
30 86 8587
Normally Open Relay, 5 Pin
Voltage Part Number
24V DC 3056
86 85
Current Draw 70mA
30
Normally Open Relay, 4 Pin
30 86 85 87
Voltage Part Number
Relays
34
34 16
16
17
17
4 Pin, Normally Open Fused Relay - 12V
40.5
40.5
Maximum Load 25A with 25A fuse
23.5
23.5 24.5
24.5
Current Draw 140mA
11
11
Normally Open Relay, 4 Pin
Voltage Part Number 87
12V DC 3076 30 85
86
30 86 8587
34 16
17
4 Pin, Normally Open Fused Relay - 24V 40.5
Maximum Load 15A with 15A fuse 23.5 24.5
24V DC 3077 30 85
86
30 86 8587
1111
5 Pin, Normally Open Mini Relay - 12V
Maximum Load 40A 8787
8787
Current Draw 140mA 8686 8585
2626 1616
30 868587
30 86 8587
2626
5 Pin, Normally Open Mini Relay - 24V
Maximum Load 30A
2424
Current Draw 70mA
1111
Normally Open Relay, 5 Pin
Voltage Part Number
3030
8686 858787
858787
123
Relays
12V DC 3057
24V DC 3058
12V DC 3087 15
87
24V DC 3087-24V 31 87a
124
Relays
Relay Connector
Relay Connector
Part Number Bulk Pack of 50
4973 4973-BULK
Note : P/N’s 3076-3077 are not suitable for multiple installations using this connector.
12V DC 3064
12V DC 3065 31 2 54
12V DC 4973-M
87 30 45 14
High Capacity Relays - 4 Pin
85 86 17.5
Voltage Max Load Current Draw Part Number
85 86 14
30 86 8587 29
Terminals 30 and 87
are 6mm stud.
125
Crimp Terminals
4mm cable
8205 12 8505 100 6.3mm
1.84mm cable
2
4mm cable
8214 12 8514 100 6.3mm
1.84mm cable
2
5 to 6mm cable
8215 10 8515 100 6.3mm 2.9 to 4.59mm cable
2
4mm cable
8221 14 8521 100 GMH type 1.84mm cable
2
4mm cable
8223 14 8523 100 GMH type 1.84mm cable
2
126
Crimp Terminals
Cable Connectors
Blister Part No. Quantity Bulk Part No. Quantity Cable
8235 9 8535 50
Features With the use of pliers, connects splices and insulates 0.75 to 1.13 mm (2.5 to 3 mm) cable.
2
Eye Terminals
Blister Part No. Quantity Bulk Part No. Quantity Size Cable
Spade Terminals
Blister Part No. Quantity Bulk Part No. Quantity Size Cable
8573 100 6.3mm 1.84mm 2
Circuit Tester
Circuit Tester
Part Number
7013
Crimping Tool
Spring return hand grips. Cuts cable. Strips insulation from cable measuring
2.5 to 6mm (0.75-6mm2) in diameter. Crimps all popular insulated and non-
insulated terminals. Cuts bolts with metric threads M2.6, M3, M3.5, M4, M5.
Crimping Tool
Part Number
8272
Crimping Tool
Crimping Tool
Part Number
8273
Crimping tool designed for use with Super Seal connector terminals
HM8298
128
Cable Ties
20
ties. Strongest possible locking power without
damaging the serrations of the tie. Quick
30
fastening and simple locking mechanism.
Black ties are UV resistant.
40
50
Clear Cable Ties
60 Quantity
100 Length Width
70
per Pack mm mm
8341
80
78 2.5
90
8342 103 2.5
100
8343 143 3.2
110
8344 191 4.5
120
150
160
Black UV Resistant Cable Ties
170
Quantity Quantity
180
10 100 Length Width
per Pack per Pack mm mm
190
8341UV 78 2.5
200
8342UV 100 2.5
210
340
8333UV 8343UV 153 3.2
350
380
Diagram not to scale 8336UV 8346UV 382 7.6
Cable Connectors
Cable Connectors
129
Ø5.5
Ø5.5 Ø5.5 2626 26
Number of Fuses 4
2525 4040
8720 Fuse Type 2 x 10A, 2 x 15A 25 40
1818 18
41.5
4 Blade Fuse Boxes 57.5
41.5 41.5
57.5 57.5
Description Part Number
1616 16
Top Connector Fuse Box 8720 3939 39
8720-S
Side Connector Fuse Box 8720-S
Number of Fuses 6
25
25 25 60
60 60
Fuse Type 3 x 10A, 3 x 15A
18
18 18
8721 41.5
41.5 41.5
6 Blade Fuse Boxes 57.5
57.5 57.5
Black plastic housing with transparent snap-fit lid and 6.3mm male
blade terminals. 6mm diameter stud input.
61 61 80 80
Complete with 2 spare fuse holders and label set.
47 47
Number of Fuses 6 72 72
8725
105
105 105
Number of Fuses 8
29.5
29.5 29.5 95.5
95.5 95.5
Fuse Type 4 x 10A, 4 x 15A
8722 36.5 135.2
36.5 36.5
8 Blade Fuse Boxes
6.3
6.3 6.3 122.6
Description Part Number 45.2
45.2
45.2 120
120 120
Top Connector Fuse Box 8722
Side Connector Fuse Box 8722-S
8722-S
93.6
135.2
16 Blade Fuse Box 36.5
122.6
Ø 8.5
16-way fuse box featuring black plastic housing with secondary locks, transparent
71
cover and sealing gasket. Supplied with mounting brackets (male and female).63.5
Number of Fuses 16
93.6
Fuse Type 6 x 10A, 6 x 15A, 2 x 20A, 2 x 25A 135.2
36.5 122.6 Ø 8.5
8724
130 93.6
36.5 Ø 8.5
Circuit Breakers
Compact single pole, heavy duty thermal circuit breakers with push-to-reset mechanism and separate
8736 (colour coded) manual release for extra low voltage wiring systems on all types of craft. Ideal
replacement for blade fuses in heavy duty applications.
8737
Voltage Max 28V (Min. 10V)
3A Purple 8736
8739 6A Green 8737
10A Red 8738
15A White 8739
20A Yellow 8740
8740
8741
25A Blue 8741
30A maximum. May be interlocked face to face or end to end. Complete with
transparent dust cover lid and snap-in terminals. Suitable for cable up to 5mm
(Conductor cross sectional area up to 2.90mm2).
8718
20A maximum. Complete with 15A blade fuse. Quick connect type, manufactured by 3M
USA. Suitable for cable up to 4mm (Conductor cross sectional area up to 1.84mm2).
Part Number
8719
131
Bilge Pumps
Bilge Pumps
Hella marine bilge pumps are completely submersible, vibration resistant and maintenance free.
Removable base plate allows cleaning of the intake chamber and also serves as a mounting plate.
For reliable operation and safety Hella marine recommends the following rules be followed:
HEAD (ft)
1500 l/hr / 400 GPH Bilge Pump 8
6
4
Part Number 2
2730 81 0 1 2 3 4 5 6 7 8
FLOW (Gallon/ Min)
2731
0 1 2 3 4 5 6 7 8 9 10 11 12
88 FLOW (Gallon/ Min)
8
6
24V 6500 l/hr / 1750 GPH Bilge Pump 4
2
Pumping Capacity 6500 l/h / 1750 GPH
0 3 6 9 12 15 18 21 24 27 30 33
119
Delivery Head 4m FLOW (Gallon/ Min)
Voltage 24V DC
Power Consumption 6A
Outlet Hose Internal Diameter 25.0mm
Outlet Hose External Diameter 30.0mm
2733
132
Replacement Bulbs
10.5
10.5
31
12V 10 SV8.5 N1210
8.5
134
Replacement Bulbs
9.2
12V 2 BA9s H122
12V 6 BA9s HL126X
9.1
26
12V 4 BA9s T4W HL124
24V 4 BA9s T4W HL244
12V 5 BA9s YL125
135
136
2LT 959 910-621 19 2LT 995 002-131 25 2XT 980 502-251 87 2XT 980 587-271 87 4973 125
2LT 959 910-631 19 2LT 995 002-141 25 2XT 980 502-291 87 2XT 980 588-031 87 4973-BULK 125
2LT 959 910-651 19 2LT 995 002-151 25 2XT 980 503-021 87 2XT 980 588-041 87 4973-M 125
2LT 959 910-661 19 2LT 995 002-161 25 2XT 980 503-031 87 2XT 980 588-051 87
2LT 959 910-721 19 2LT 995 002-171 25 2XT 980 503-041 87 2XT 980 588-061 87
2LT 959 910-731 19 2LT 995 002-181 25 2XT 980 503-051 87 2XT 980 588-071 87
5 Page
2LT 959 910-751 19 2LT 995 002-191 25 2XT 980 503-091 87 2XT 980 588-231 87 5XA 998 572-001 111
2LT 959 910-761 19 2LT 995 002-201 25 2XT 980 503-221 87 2XT 980 588-241 87
2LT 959 940-201 17 2LT 995 002-211 25 2XT 980 503-231 87 2XT 980 588-251 87
2LT 959 940-211 17 2LT 995 002-221 25 2XT 980 503-241 87 2XT 980 588-261 87
6 Page
2Lt 959 940-401 17 2LT 995 002-321 25 2XT 980 503-251 87 2XT 980 588-271 87 6100 110
2Lt 959 940-411 17 2LT 998 504-001 51 2XT 980 503-291 87 6100-W 110
2LT 959 940-501 17 2LT 998 504-011 51 2XT 980 507-021 87 6101 110
2LT 959 940-511 17 2LT 998 505-001 50 2XT 980 507-031 87
3 Page 6102 110
2LT 959 940-601 17 2LT 998 505-011 50 2XT 980 507-041 87 3053 122
2LT 959 940-611 17 2XT 959 510-001 89 2XT 980 507-051 87 3054 122
2Lt 959 941-001 17 2XT 959 510-011 89 2XT 980 507-091 87 3055 122
7 Page
2Lt 959 941-011 17 2XT 959 510-051 89 2XT 980 507-221 87 3056 122 7013 128
2LT 980 520-001 21 2XT 959 510-061 89 2XT 980 507-231 87 3057 124
2LT 980 520-011 21 2XT 959 510-151 89 2XT 980 507-241 87 3058 124
2LT 980 520-031 21 2XT 959 510-251 89 2XT 980 507-251 87 3059 122
8 Page
2LT 980 520-041 21 2XT 959 510-301 89 2XT 980 507-301 87 3060 122 8000 108
2LT 980 520-101 21 2XT 959 510-311 89 2XT 980 508-021 87 3061 125 8009 108
2LT 980 520-111 21 2XT 959 510-331 89 2XT 980 508-031 87 3062 125 8009BULK 108
2LT 980 520-131 21 2XT 959 510-351 89 2XT 980 508-041 87 3064 125 8022 108
2LT 980 520-161 21 2XT 959 510-451 89 2XT 980 508-051 87 3065 125 8200 126
2LT 980 520-201 21 2XT 959 510-501 89 2XT 980 508-091 87 3076 123 8201 126
2LT 980 520-211 21 2XT 959 510-511 89 2XT 980 508-221 87 3077 123 8202 126
2LT 980 520-231 21 2XT 959 510-551 89 2XT 980 508-231 87 3078 123 8203 126
2LT 980 520-241 21 2XT 959 510-561 89 2XT 980 508-241 87 3078-BULK 123 8204 126
2LT 980 520-301 21 2XT 959 510-621 89 2XT 980 508-251 87 3079 123 8205 126
2LT 980 520-311 21 2XT 959 510-651 89 2XT 980 508-291 87 3079-BULK 123 8210 126
2LT 980 520-331 21 2XT 959 510-701 89 2XT 980 508-691 87 3080 124 8211 126
2LT 980 520-361 21 2XT 959 510-711 89 2XT 980 580-531 87 3080-BULK 124 8212 126
2LT 980 520-501 21 2XT 959 510-751 89 2XT 980 580-541 87 3081 124 8213 126
2LT 980 520-511 21 2XT 959 510-761 89 2XT 980 580-551 87 3081-BULK 124 8214 126
2LT 980 520-531 21 2XT 959 510-851 89 2XT 980 580-561 87 3082 123 8215 126
2LT 980 520-541 21 2XT 959 510-901 89 2XT 980 580-571 87 3082-BULK 123 8216 126
2LT 980 520-601 21 2XT 959 510-931 89 2XT 980 580-731 87 3083 123 8220 126
2LT 980 520-611 21 2XT 959 680-411 88 2XT 980 580-741 87 3083-BULK 123 8221 126
2LT 980 520-801 21 2XT 959 680-421 88 2XT 980 580-751 87 3084 125 8222 126
2LT 980 520-811 21 2XT 959 680-431 88 2XT 980 580-761 87 3085 125 8223 126
2LT 980 520-901 21 2XT 959 680-611 88 2XT 980 580-771 87 3086 124 8224 127
2LT 980 520-911 21 2XT 959 680-621 88 2XT 980 581-531 87 3086-24V 124 8230 127
2LT 980 620-801 22 2XT 959 680-631 88 2XT 980 581-541 87 3087 124 8231 127
2LT 980 620-811 22 2XT 959 680-711 88 2XT 980 581-551 87 3087-24V 124 8232 127
2LT 980 620-901 22 2XT 959 680-721 88 2XT 980 581-561 87 3099 113 8235 127
2LT 980 620-911 22 2XT 959 680-731 88 2XT 980 581-571 87 8240 127
2LT 980 650-001 15 2XT 959 680-811 88 2XT 980 581-731 87 8241 127
2LT 980 670-201 35 2XT 959 680-841 88 2XT 980 581-741 87
4 Page 8242 127
2LT 980 670-211 35 2XT 959 680-851 88 2XT 980 581-751 87 4444 118 8243 127
2LT 980 670-301 35 2XT 959 680-911 88 2XT 980 581-761 87 4445 118 8244 127
2LT 980 670-311 35 2XT 959 680-921 88 2XT 980 581-771 87 4446 118 8245 127
2LT 980 670-341 35 2XT 959 680-931 88 2XT 980 582-031 87 4447 118 8246 127
2LT 980 670-351 35 2XT 980 500-521 87 2XT 980 582-041 87 4448 118 8247 127
2LT 980 747-001 35 2XT 980 500-531 87 2XT 980 582-051 87 4470 118 8248 127
2LT 980 747-011 35 2XT 980 500-541 87 2XT 980 582-061 87 4471 118 8249 127
2LT 980 747-101 35 2XT 980 500-551 87 2XT 980 582-071 87 4472 118 8260 127
2LT 980 747-111 35 2XT 980 500-591 87 2XT 980 582-231 87 4473 118 8261 127
2LT 980 910-001 19 2XT 980 500-721 87 2XT 980 582-241 87 4474 118 8262 127
2LT 980 910-011 19 2XT 980 500-731 87 2XT 980 582-251 87 4475 118 8263 127
2LT 980 910-201 19 2XT 980 500-741 87 2XT 980 582-261 87 4479 118 8272 128
2LT 980 910-211 19 2XT 980 500-751 87 2XT 980 582-271 87 4480 118 8273 128
2LT 980 910-401 19 2XT 980 500-791 87 2XT 980 583-031 87 4481 118 8282 126
2LT 980 910-411 19 2XT 980 501-521 87 2XT 980 583-041 87 4640 112 8284 127
2LT 980 950-001 37 2XT 980 501-531 87 2XT 980 583-051 87 4650 114 8333UV 129
2LT 980 950-011 37 2XT 980 501-541 87 2XT 980 583-061 87 4652 114 8334UV 129
2LT 980 950-101 37 2XT 980 501-551 87 2XT 980 583-071 87 4653 114 8335UV 129
2LT 980 950-111 37 2XT 980 501-591 87 2XT 980 583-231 87 4654 114 8336UV 129
2LT 980 950-201 37 2XT 980 501-721 87 2XT 980 583-241 87 4720 112 8341 129
2LT 980 950-211 37 2XT 980 501-731 87 2XT 980 583-251 87 4721 113 8341UV 129
2LT 995 002-001 25 2XT 980 501-741 87 2XT 980 583-261 87 4722 112 8342 129
2LT 995 002-011 25 2XT 980 501-751 87 2XT 980 583-271 87 4723 113 8342UV 129
2LT 995 002-021 25 2XT 980 501-791 87 2XT 980 587-031 87 4724 112 8343 129
2LT 995 002-031 25 2XT 980 502-021 87 2XT 980 587-041 87 4901 107 8343UV 129
2LT 995 002-041 25 2XT 980 502-031 87 2XT 980 587-051 87 4901BULK 107 8344 129
2LT 995 002-051 25 2XT 980 502-041 87 2XT 980 587-061 87 4902 107 8344UV 129
2LT 995 002-061 25 2XT 980 502-051 87 2XT 980 587-071 87 4911 107 8345 129
2LT 995 002-071 25 2XT 980 502-091 87 2XT 980 587-231 87 4911BULK 107 8345UV 129
2LT 995 002-081 25 2XT 980 502-221 87 2XT 980 587-241 87 4912 107 8346 129
2LT 995 002-091 25 2XT 980 502-231 87 2XT 980 587-251 87 4920 107 8346UV 129
2LT 995 002-121 25 2XT 980 502-241 87 2XT 980 587-261 87 4921 107 8452 129
137
138
South Australia
2 Portrush Road
Payneham
SA 5070
Phone (08) 8365 1195
Fax (08) 8365 1824
Visit us online
Victoria (Head Office)
54-76 Southern Road,
Mentone
VIC 3194
Phone (03) 9581 9333
Fax (03) 9585 2654
Western Australia
1 Colin Jamieson Drive
Welshpool
WA 6106
S-HMCATHA06
Latest products • News • Catalogues • Instruction sheets and more Phone (08) 9351 9900
Fax (08) 9351 9955
www.hellamarine.com
Follow us on
www.facebook.com/hellamarine
www.linkedin.com/company/hella-marine
www.youtube.com/user/hellamarine
140