Professional Documents
Culture Documents
For Home
Feature:
Description:
This is a passive, thermo syphon, heat pipe, system. It has no moving parts and is the latest, most efficient
technology. This is a very high-tech version of a black garden hose laying in the sun. Water inside the hose
gets very hot. Cold water, which normally enters your water heater in the house, is diverted through a
pipe into the food-grade stainless steel tank on top of the collector tubes. Sunlight heaters a fluid in the
middle of the sealed glass collector tubes.
The heated fluid rises to the top of the tube where it heats a copper rod. The rod fits into a copper nipple
in the white storage tank. Inside the tank, water surrounding the nipple gets hot. When you turn on a
faucet in the house, cold water flows in one side of the storage tank, forcing hot water out the other side
and into the house. Drinking water never comes in contact with the collector tubes, so there is no chance
of anything toxic getting into your water. If a tube breaks, the rest of the tubes keep working and there's
no leak because the nipple seals the tank.
1) Connect with tap water piping directly. Water is feed automatically by the water pressure. The vacuum
tubes absorb the sun energy and transfer the heat to the tank via the copper heat pipe and the water
temperature of tank is gradually heated.
2) If the water is expand and pressure rise to more than 6 bar. The P/T valve will release automatically.
3) The electric heater can be operated for backup heating. Compact Heat pipe pressurized solar water
heater
Scope of Application:
It suit for the climate where are very hot, it will reach the best efficiency when use it near to the
equator.
Accessories:
1. Electric heater: 1500W-2000W/220V-230V;
2. Intelligent controller: SR609 (esp. for integrative pressurized type);
3. P/T valve (pressure & temperature): WAY-20, 0.7MPa;
4. Magnesium rod: diameter 20mm, length 23 cm, copper connector;
5. Temperature sensor;
6. Air vent valve;
7. Vacuum valve;
8. Check valve.