Professional Documents
Culture Documents
S3 20
S3 20
BEAM
Semester (Thirtd)
Authors (Acevedo Martínez Jonathan; Carlozama Diaz Cristian; Lopez Caicedo Jhon)
INTRODUCCIÓN
It is well known that all the knowledge learned in each of the classes is of great importance in
our daily life in engineering, since they provide the key foundations for the execution of
infrastructure projects, with this project, we seek to observe the practice in the field of knowledge
acquired, using the calculation of several variables as a tool, taking as its main use the approach
and development of a differential equation.
The main advantage of porches is that they The project is based on calculating the
allow freedom in architectural design. In slopes and deviations using elastic
addition, these structures are capable of methods, as well as carrying out all kinds
resisting gravitational loads, lateral wind of calculations, aided by differential
loads, and earthquakes. Its stiffness equations.
depends on the stiffness of the limbs and
the connections in it.
5. CONTEXTUALIZACIÓN • Socioeconómica
• Geográfica
Se tomó la decisión de realizar el
El pórtico se ubica en un parque proyecto basado en un análisis de
acuático en la vía que comunica a costos, el cual resulto positivo al
Pasto con el municipio de evidenciar la recuperación de la
Chachagüí, se realiza como inversión y las ganancias
entrada principal para acceder a las económicas obtenidas con la
atracción turística gracias a las
instalaciones. Este soportara
estatuas representativas. De igual
cargas generadas por dos estatuas manera, será notoria la mejoría
las cuales se ubicarán en la parte social y ayudará al desarrollo de la
alta de la estructura. comunidad por el amplio comercio
Con este proyecto se busca mayor entre visitantes y locales.
visualización para el parque y por
consiguiente la integración de las
esculturas las cuales tienen gran
valor representativo para los
aledaños
• Normativa
∬ 𝑀(𝑥) + 𝐶1 𝑥 + 𝐶2
𝑑2𝑣 𝑑𝑣
𝐸𝐼 = 𝑀(𝑥) 𝐸𝐼 = ∫ 48𝑥 − 50(𝑥 − 4)𝑑𝑥
𝑑𝑥 2 𝑑𝑥
𝐶2 = 0 𝐶3 (6) + 𝐶4 = −1661.36
Condiciones de frontera: 𝑥 = 6; 𝑣 = 0 𝐶3 (6) + 0 = −1661.36
𝐸𝑙𝑣 = 8𝑥 3 − 8.33(𝑥 − 4)3 + 𝐶3 𝑥 + 𝐶4 𝐶3 = −276.9
8𝑥 3 − 8.33(6 − 4)3 + 𝐶3 (6) + 𝐶4 𝐶5 (10) + 𝐶6 = −15670
𝐶3 (6) + 𝐶4 = −1661.36 𝐶5 (10) + 10 = −15670
Condiciones de frontera: 𝑥 = 10; 𝑣 = 0 𝐶5 = −1567
𝐸𝑙𝑣 = −7.38𝑥 3 + 235𝑥 2 + 𝐶5 𝑥 + 𝐶6 𝐶2 = 𝐶4 = 𝐶6
−7.38(10)3 + 235(10)2 + 𝐶5 (10) + 𝐶6
𝐶5 (10) + 𝐶6 = −15670
Los valores de las constantes son: −23𝑥2 + 470𝑥 − 1567
𝜃=
𝐶1 = −276.9 𝐸𝐼
𝜃=
24𝑥2 − 276.9 • Fue posible establecer ecuaciones de
𝐸𝐼 giros y deflexiones, las cuales quedan
en términos de x, E, I, por
𝐸𝑙𝑣 = 8𝑥 3 + 𝐶1 𝑥 + 𝐶2 consiguiente, al reemplazar estos
valores obtenemos los resultados
8𝑥3 − 276.9𝑥 numéricos de las ecuaciones
𝑣=
𝐸𝐼 mencionadas.
𝑑𝑣 8. BIBLIOGRAFIA.
𝐸𝐼 = 24𝑥 2 + 25(𝑥 − 4)2 + 𝐶3
𝑑𝑥
• España, D, A. (2020). Ejes neutros
24𝑥2 + 25(𝑥 − 4)2 − 276.9
𝜃= en vigas. Recuperado de:
𝐸𝐼 https://youtu.be/zAovate8hDI.
• Torrano, S. (2011). Displacements in
𝐸𝑙𝑣 = 8𝑥 3 − 8.33(𝑥 − 4)3 + 𝐶3 𝑥 + 𝐶4 flexion. Retrieved from
https://meet.google.com/linkredirect?aut
8𝑥3 − 8.33(𝑥 − 4)3 − 276.9𝑥 huser=0&dest=https%3A%2F%2Fdocs.g
𝑣=
𝐸𝐼 oogle.com%2Fdocument%2Fd%2F1fEij
4ND6Q0aMPJsNfDs5Ff0qd8t2n-
𝑑𝑣 0VQYf%F64AUmsU
𝐸𝐼 = −23.5𝑥 2 + 470 + 𝐶5 • España, D, A. (2020) Stress in
𝑑𝑥
beams. Recovered from:
https://youtu.be/uyuo3IJgY6c.
• España,D,A. (2020) shear forces in
beams. recovered from:
https://youtu.be/sZ4QBpVyuh.