Professional Documents
Culture Documents
Overview
The control panel is used for the control and monitoring of individual drives. You traverse drives from
the control panel by specifying values (e.g. speed setpoint).
Restrictions
• The "Switch-on/switch-off infeed" ② option is only available when using a CU320-2 PN without a PM240-2
Power Module.
Further information
You can find further information in Chapter "Using the control panel".
This document constitutes a free excerpt compiled by the user himself/herself from the documentation provided by Siemens for this product. Siemens disclaims all liability for the
completeness of this document. It shall only be used for the user's own internal purposes. It shall not be passed on to third parties.
8/23/2020
See also
→ Using the control panel
This document constitutes a free excerpt compiled by the user himself/herself from the documentation provided by Siemens for this product. Siemens disclaims all liability for the
completeness of this document. It shall only be used for the user's own internal purposes. It shall not be passed on to third parties.
8/23/2020