Professional Documents
Culture Documents
ADVANTAGES
Suitable for all kind of surfaces
High tensile and flexural strength
Moisture resistant (wet on wet)
Ready to use (no dilution or stirring needed)
Cost efficiency
Easy to identify (tinted blue)
Easy to use (no skilled worker needed)
Time and cost saving (no hacking or chipping needed)
DESCRIPTION
Single component, water based with non-toxic and non-inflammable concrete bonding agent with
the latest formulated technology containing PVA homopolymer and medium viscosity that have
been polymerize into resins that are suitable at high humidity exposure.
RECOMMENDED FOR
Tile installation (Homogeneous tile, Porcelain tile, Wall and Floor Tile, Marble, Granite, Interior and Exterior)
Plastering on all kind of surface (Concrete, Steel, Aluminium, Wood, Glass, PU Waterproofing, Interior and
Exterior, etc.)
Floor rendering on all kind of surface (Concrete, Steel, Aluminium, Wood, Glass, PU Waterproofing, Interior
and Exterior, etc.)
Rectification work that involved cementitious materials (Cement floor patching, tiling, tiles on tiles, covering
crack lines, etc.)
TECHNICAL DATA
Colour Blue
pH value 8
Form Liquid water-base
Chemical Base Polyvinyl acetate homopolymer resin
Flexural Strength 218 psi
Tensile Strength 2.50 N/mm2
Density lbs/ gal/ kg/L 8.9 (1.07) ASTM D1475
Solid weight > 48% ASTM D5207
Packing 20 litres nett
Consumption 1 litre / 15 m²
APPLICATION PROCEDURE
Apply a single layer of Bond It™ with paint roller (big or small) onto the sound and cleaned (from dust, dirt,
grease, oil or other contaminations) surface. Leave to dry for approximately 30-45 minutes until it forms a
semi transparent coating. Continue with the desired works (tiling, plastering, patching, rendering, etc.) as
normal. DO NOT mix with water or any form of liquid.
Note: The above information is for general guidance only. It does not constitute as an offer of warranty by the
manufacturer.