Professional Documents
Culture Documents
PILOT’S GUIDE
BAE SYSTEMS CANADA INC. (formerly Canadian Marconi Company)
now operates under the name:
LIMITATIONS
1. Press RTE.
6. Press LEGS.
CREATING ROUTES
ACTIVATING ROUTES
1. Press RTE.
2. Press CO ROUTE, LSK 6R.
3. Press NEXT or PREV as required to display
Route Identifier.
4. Press the appropriate LSK to select desired
Route Identifier.
5. Press EXEC.
1. Press RTE.
2. Enter Route Identifier.
3. Press LSK 2L.
4. Press EXEC.
EDITING ROUTES
1. Press LEGS.
2. Press NEXT or PREV as required to display
route discontinuity.
3. Press appropriate LSK to move identifier
after discontinuity into scratch pad.
4. Press appropriate LSK to move identifier into
discontinuity.
5. Press EXEC.
Inserting Waypoints -
Place/Bearing/Distance
1. Press LEGS.
2. Enter Identifier, followed by Bearing, "/" and
distance.
3. Press NEXT or PREV as required.
4. Press appropriate LSK to move the identifier
to the desired place in the route.
5. Perform Route Discontinuity Closure
procedure, if required.
6. Press EXEC.
ACTIVATING/EDITING ROUTES
Inserting Waypoints - Place/Bearing-
Place/Bearing
1. Press LEGS.
2. Enter Identifier, followed by Bearing, "/",
second identifier and Bearing.
3. Press NEXT or PREV as required.
4. Press appropriate LSK to move the identifier
to the desired place in the route.
5. Perform Route Discontinuity Closure
procedure, if required.
6. Press EXEC.
1. Press LEGS.
2. Enter Identifier, followed by "/", and distance.
3. Press NEXT or PREV as required.
4. Press appropriate LSK to move the identifier
to the reference waypoint.
5. Press EXEC.
Inserting Waypoints - Along-Track
Waypoint Before Reference Waypoint
1. Press LEGS.
2. Enter Identifier, followed by "/", "+/-" and
distance.
3. Press NEXT or PREV as required.
4. Press appropriate LSK to move the identifier
to the reference waypoint.
5. Press EXEC.
1. Press LEGS.
2. Enter Latitude and Longitude.
3. Press NEXT or PREV as required to display
the desired insert position.
4. Press appropriate LSK to move the identifier
to the desired place.
5. Perform Route Discontinuity Closure
procedure, if necessary.
6. Press EXEC.
EDITING ROUTES
Inserting Waypoints - Navigation Database
1. Press LEGS.
2. Enter Identifier
3. Press NEXT or PREV as required to display
the desired insert position.
4. Press appropriate LSK to move the identifier
to the desired place.
5. Perform Route Discontinuity Closure
procedure, if necessary.
6. Press EXEC.
1. Press LEGS.
2. Press NEXT or PREV as required to display
the desired identifier.
3. Press the appropriate LSK to move the
identifier after the one to be deleted into the
scratch pad.
4. Press appropriate LSK key to move the
identifier to the location of the waypoint to be
deleted.
5. Press EXEC.
Deleting Waypoints By Clear Key
1. Press LEGS.
2. Press CLR key.
3. Press NEXT or PREV as required to display
the desired identifier.
4. Press the appropriate LSK to delete the
selected identifier.
5. Perform Route Discontinuity Closure
procedure, if necessary.
6. Press EXEC.
1. Press RTE.
2. Enter L or R followed by track off-set.
3. Press LSK 2R.
4. Press EXEC.
1. Press RTE.
2. Press CLR.
3. Press LSK 2R.
4. Press EXEC.
EDITING ROUTES
Creating Downtrack Fix By Radial
1. Press FIX.
2. Enter identifier.
3. Press LSK 1L.
4. Enter radial from entered fix.
5. Press LSK 3L or LSK 4L.
6. Press LSK 3L or LSK 4L to create identifier.
7. Press LEGS.
8. Press NEXT or PREV as required.
9. Press appropriate LSK to move the identifier
to the reference waypoint.
10. Perform Route Discontinuity Closure
procedure, if necessary.
11. Press EXEC.
1. Press FIX.
2. Enter identifier.
3. Press LSK 1L.
4. Enter "/" and distance.
5. Press LSK 3L or LSK 4L.
6. Press LSK 3L or LSK 4L to create waypoint.
7. Press LEGS.
8. Press NEXT or PREV as required.
9. Press appropriate LSK to move the identifier
to the reference waypoint.
10. Perform Route Discontinuity Closure
procedure, if necessary.
11. Press EXEC.
1. Press FIX.
2. Enter identifier.
3. Press LSK 1L.
4. Press ABEAM, LSK 5L.
5. Press LSK 5L to create waypoint.
6. Press LEGS.
7. Press NEXT or PREV as required.
8. Press appropriate LSK to move the identifier
to the reference waypoint.
9. Perform Route Discontinuity Closure
procedure, if necessary.
10. Press EXEC.
EDITING ROUTES
DIRECT-TO/INTERCEPT
Direct To a Waypoint
1. Press LEGS.
2. Press PREV or NEXT as required to display
required identifier.
3. Press appropriate LSK to copy identifier into
scratch pad.
4. Press PREV or NEXT as required to display
TO waypoint.
5. Press LSK 1L to move identifier to TO
waypoint.
6. Press EXEC.
1. Press LEGS.
2. Enter waypoint identifier.
3. Press LSK 1L to move identifier to TO
waypoint.
4. Perform Route Discontinuity Closure
procedure.
5. Press EXEC.
Intercept On Default Inbound Course
1. Press LEGS.
2. Press PREV or NEXT as required to display
required waypoint.
3. Press appropriate LSK to copy identifier into
scratch pad.
4. Press PREV or NEXT as required to display
TO waypoint.
5. Press LSK 1L to move identifier to TO
waypoint.
6. Press INTC CRS (LSK 6R).
7. Press EXEC.
1. Press LEGS.
2. Press PREV or NEXT as required to display
required waypoint.
3. Press appropriate LSK to copy identifier into
scratch pad.
4. Press PREV or NEXT as required to display
TO waypoint.
5. Press LSK 1L to move identifier to TO
waypoint.
6. Enter inbound course.
7. Press INTC CRS (LSK 6R).
8. Press EXEC.
DIRECT-TO/INTERCEPT
HOLDING PATTERN
En Route Holding
1. Press HOLD.
2. Press PREV or NEXT as required to display
the desired HOLD FIX.
3. Press appropriate LSK to move the / H
prompt to the desired holding waypoint.
4. Verify/modify pattern parameters, if required.
5. Press EXEC.
1. Press HOLD.
2. Press HOLD PPOS (LSK 6R).
3. Verify/modify pattern parameters, if required.
4. Press EXEC.
1. Press HOLD.
2. Press NEW HOLD (LSK 6L).
3. Press PREV or NEXT as required to display
the desired HOLD FIX.
4. Press appropriate LSK to move the / H
prompt to the desired holding waypoint.
5. Verify/modify pattern parameters.
6. Press EXEC.
1. Press HOLD.
2. Press PREV or NEXT as required to display
the desired HOLD FIX.
3. Verify/modify pattern parameters.
4. Press EXEC.
1. Press HOLD.
2. Press EXIT HOLD (LSK 6R).
3. Press EXEC.
1. Press LEGS.
2. Press LSK 1L to copy Holding identifier into
scratch pad.
3. Press LSK 1L to move Holding identifier to
TO waypoint.
4. Press EXEC.
HOLDING PATTERN
Exit Holding Pattern- Exit By Direct-To Any
Enroute Waypoint
1. Press LEGS.
2. Press PREV or NEXT as required to display
required waypoint.
3. Press appropriate LSK to copy identifier into
scratch pad.
4. Press PREV or NEXT as required to display
TO waypoint.
1. Press LEGS.
2. Press PREVIOUS or NEXT to display
desired Holding waypoint.
3. Enter "/".
4. Press appropriate LSK.
5. Press EXEC.
SELECTING STARs
STAR Selection
1. Press DEP/ARR.
2. Press LSK 1R or 2R prompt to display the
ARRIVALS page for either the origin or
destination airport.
3. Press PREV or NEXT as required to display
the desired STAR.
4. Press the appropriate left hand LSK to select
the STAR.
5. Press PREV or NEXT as required to display
the desired STAR transition.
6. Press the corresponding left hand LSK to
select the transition.
7. Press LEGS.
8. Perform Route Discontinuity Close-up
procedure, if required.
9. Press EXEC.
1. Press DEP/ARR.
2. Press LSK 1R or 2R prompt to display the
ARRIVALS page for either the origin or
destination airport.
3. Press LSK 1L to reselect the STARs.
4. Perform STAR Selection procedure.
SELECTING APPROACHES
Approach Selection
1. Press DEP/ARR.
2. Press LSK 1R or 2R to display the
ARRIVALS page for either the origin or
destination airport.
3. Press PREV or NEXT as required to display
the desired APPROACH.
4. Press the appropriate right hand LSK to
select the APPROACH.
5. Press PREV or NEXT as required to display
the desired APPROACH transition.
6. Press the corresponding right hand LSK to
select the transition.
7. Press LEGS.
8. Perform Route Discontinuity Close-up
procedure, if required.
9. Press EXEC.
Approach Modification
1. Press DEP/ARR.
2. Press LSK 1R or 2R prompt to display the
ARRIVALS page for either the origin or
destination airport.
3. Press LSK 1R to reselect the
APPROACHes.
4. Perform Approach Selection procedure.
SELECTING STARs/APPROACHES
MISSED APPROACH
MISSED/REPEATING APPROACH
MESSAGES
ALERT MESSAGES
MESSAGES
CANADIAN MARCONI COMPANY