Professional Documents
Culture Documents
NPN Silicon
COLLECTOR 1
BASE
2
EMITTER 3
1
2
3
MAXIMUM RATINGS
Rating Symbol Value Unit CASE 29–04, STYLE 17
TO–92 (TO–226AA)
Collector – Emitter Voltage VCES 30 Vdc
Collector – Base Voltage VCB 40 Vdc
Emitter – Base Voltage VEB 10 Vdc
Collector Current — Continuous IC 1.0 Adc
Total Power Dissipation @ TA = 25°C PD 625 mW
Derate above 25°C 12 mW/°C
Total Power Dissipation @ TC = 25°C PD 1.5 Watts
Derate above 25°C 12 mW/°C
Operating and Storage Junction TJ, Tstg – 55 to +150 °C
Temperature Range
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Thermal Resistance, Junction to RqJA 200 °C/W
Ambient
Thermal Resistance, Junction to Case RqJC 83.3 °C/W
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic Symbol Min Typ Max Unit
OFF CHARACTERISTICS
Collector – Emitter Breakdown Voltage V(BR)CES 30 — — Vdc
(IC = 2.0 mAdc, VBE = 0)
Collector – Base Breakdown Voltage V(BR)CBO 40 — — Vdc
(IC = 10 mAdc, IE = 0)
Emitter – Base Breakdown Voltage V(BR)EBO 10 — — Vdc
(IE = 100 nAdc, IC = 0)
Collector Cutoff Current ICES — — 500 nAdc
(VCE = 30 Vdc)
Collector Cutoff Current ICBO — — 100 nAdc
(VCB = 30 Vdc, IE = 0)
Emitter Cutoff Current IEBO — — 100 nAdc
(VEB = 10 Vdc, IC = 0)
RS
in
en
IDEAL
TRANSISTOR
500 2.0
BANDWIDTH = 1.0 Hz BANDWIDTH = 1.0 Hz
RS ≈ 0 1.0
200
0.7
en, NOISE VOLTAGE (nV)
100 µA 100 µA
0.1
20
0.07
IC = 1.0 mA 10 µA
0.05
10
0.03
5.0 0.02
10 20 50 100 200 500 1 k 2 k 5 k 10 k 20 k 50 k 100 k 10 20 50 100 200 500 1 k 2 k 5 k 10 k 20 k 50 k 100 k
f, FREQUENCY (Hz) f, FREQUENCY (Hz)
200 14
VT, TOTAL WIDEBAND NOISE VOLTAGE (nV)
10
70 IC = 10 µA 10 µA
8.0
50
100 µA
6.0
30 100 µA
4.0 IC = 1.0 mA
20
1.0 mA
2.0
10 0
1.0 2.0 5.0 10 20 50 100 200 500 100 1.0 2.0 5.0 10 20 50 100 200 500 100
RS, SOURCE RESISTANCE (kΩ) 0 RS, SOURCE RESISTANCE (kΩ) 0
20 4.0
VCE = 5.0 V
7.0 Cibo
1.0
5.0 Cobo 0.8
0.6
3.0 0.4
2.0 0.2
0.04 0.1 0.2 0.4 1.0 2.0 4.0 10 20 40 0.5 1.0 2.0 0.5 10 20 50 100 200 500
VR, REVERSE VOLTAGE (VOLTS) IC, COLLECTOR CURRENT (mA)
50 k 25°C
30 k 2.0
20 k
1.5
10 k
7.0 k
– 55°C
5.0 k 1.0
VCE = 5.0 V
3.0 k
2.0 k 0.5
5.0 7.0 10 20 30 50 70 100 200 300 500 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1000
IC, COLLECTOR CURRENT (mA) IB, BASE CURRENT (µA)
1.6 – 1.0
RθV, TEMPERATURE COEFFICIENTS (mV/°C)
0.6 – 6.0
5.0 7.0 10 20 30 50 70 100 200 300 500 5.0 7.0 10 20 30 50 70 100 200 300 500
IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA)
0.3
0.2 SINGLE PULSE
0.05
0.1
0.1
0.07 SINGLE PULSE
0.05
0.03 ZθJC(t) = r(t) • RθJC TJ(pk) – TC = P(pk) ZθJC(t)
0.02 ZθJA(t) = r(t) • RθJA TJ(pk) – TA = P(pk) ZθJA(t)
0.01
0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1.0 k 2.0 k 5.0 k 10 k
t, TIME (ms)
1.0 k
FIGURE A
700 1.0 ms
500
IC, COLLECTOR CURRENT (mA)
tP
300 TC = 25°C 100 µs
TA = 25°C PP PP
200 1.0 s
100
70
50
t1
30
CURRENT LIMIT
20 THERMAL LIMIT 1/f
+ t1 f + ttP1
SECOND BREAKDOWN LIMIT
10 DUTY CYCLE
0.4 0.6 1.0 2.0 4.0 6.0 10 20 40
VCE, COLLECTOR–EMITTER VOLTAGE (VOLTS) PEAK PULSE POWER = PP
Figure 13. Active Region Safe Operating Area Design Note: Use of Transient Thermal Resistance Data
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
A B
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
R 4. DIMENSION F APPLIES BETWEEN P AND L.
DIMENSION D AND J APPLY BETWEEN L AND K
P MINIMUM. LEAD DIMENSION IS UNCONTROLLED
IN P AND BEYOND DIMENSION K MINIMUM.
L
SEATING F
PLANE K INCHES MILLIMETERS
DIM MIN MAX MIN MAX
A 0.175 0.205 4.45 5.20
D B 0.170 0.210 4.32 5.33
C 0.125 0.165 3.18 4.19
J D 0.016 0.022 0.41 0.55
X X F 0.016 0.019 0.41 0.48
G G 0.045 0.055 1.15 1.39
H H 0.095 0.105 2.42 2.66
SECTION X–X J 0.015 0.020 0.39 0.50
V C K 0.500 ––– 12.70 –––
L 0.250 ––– 6.35 –––
N 0.080 0.105 2.04 2.66
1 N P ––– 0.100 ––– 2.54
R 0.115 ––– 2.93 –––
N V 0.135 ––– 3.43 –––
STYLE 17:
CASE 029–04 PIN 1. COLLECTOR
2. BASE
(TO–226AA) 3. EMITTER
ISSUE AD
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
MFAX: RMFAX0@email.sps.mot.com – TOUCHTONE (602) 244–6609 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
INTERNET: http://Design–NET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
6 ◊ Motorola Small–Signal Transistors, FETs and Diodes Device Data
BC517/D
This datasheet has been download from:
www.datasheetcatalog.com