Professional Documents
Culture Documents
VR Lab Simulation: Test Plan Document April 28, 2021
VR Lab Simulation: Test Plan Document April 28, 2021
VR Lab Simulation
Test Plan Document
April 28, 2021
Faculty Advisors: Dr. Wilfrido Moreno, Dr. Chung Seop Jeong, Liliana Villavicencio Lopez
Introduction
The VR Lab Simulation is a project that uses a virtual reality simulation of an in-person electrical
engineering lab that could be used in future remote learning experiences. The VR Lab simulation
project will focus on two main parts: simulation software and software compatibility with the device. So,
the tests will be divided into two basic parts: one that tests the software's compatibility with devices.
The second is to check if the software is working properly on the specified devices.
Scope
- In scope:
o Software compatibility with devices such as computers, virtual reality glasses, brain
wave sensors.
o Check that the software calculation results are accurate with are true to reality.
- Out scope:
o Will not check the configuration of peripheral devices, or compatibility of other
software, when connected to it.
Assumptions / Risks
- Risks:
o The risks considered below will greatly affect the progress of the project. In addition
to the risks of the measurement accuracy of the software will lead to undesirable
results when the user wants to use it to use this result for other evaluation purposes.
Test Approach
The project uses a slow but steady approach with processes that are well considered before
implementation. So, the tests will be conducted after they have been carefully considered in the
implementation process.
April 28, 2021 Page 2 of 6
VR Lab Simulation Test Plan Document
Testing beyond the main factor is to test the performance of the product, it also has another meaning:
the team will have more experience to develop custom features for the product quickly and effectively.
Test Environment
A computer, virtual reality glasses, and brainwave sensors are needed. In addition, a table of results
data with actual calculations and measurements is also required to compare with the software's
calculation.